|
Tender For Major Works In Kgbv Kharman Ganesh Qaimoh-= 1 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 2 Runner Beams 3 Suspended floors, Slabs 4 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. 5 Centering and shuttering including strutting, propping etc. and removal of form for: 6 Lintel, beams, plinth beams, girders, bressumers and cantilevers. 7 Suspended floors, roofs, landings, balconies and access platforms. 8 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. One or more coats on Old work 9 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) 10 of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick 11 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 12 Dismantling tile work floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles 10 mm to 25 mm 13 12 mm Cement Plaster of mix: 1:6 (1 cement:6 fine sand) 14 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and joining with grey cement slurry @ 3.3 Kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 15 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc,. complete in all colours, shades, except white, Ivory, Fume Red Brown 16 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile ashesive ( water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made seperately). Size of tile 600x600 mm 17 Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm) over priming coat of primer applied @ 0.80 Litres/ 10 sqm complete including cost of priming coat. 18 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work 19 Dismatling wood work in frames , trusses , purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead: of sectional area 40 sqm and above 20 Dismantling roofing including ridges, hips valleys and gutters etc,. And stacking the material within 50 meters lead of: G.S Sheet 21 Providing and Hoisting and fixing trusses/purlins//rafters/posts/post-plates or like components including cost of screws etc. complete Popular wood 22 Labour charges for available wood work acquired from dismantling of existing wooden truss incld. Hoisting and fixingtrusses/purlins/rafters/posts/post-plates or like components including cost of screws etc. complete 23 Providing and fixing of High Rib colour coated G.S sheet roofing of 0.50 mm including polymer coated J or L hooks and G.I limpit washer includes Ridges and valleys complete job 24 Providing and Fixing of colour coated G.S sheet roofing of 0.40 mm including nails and required frame or woodwork all complete job 25 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer 26 Carriage of materials from source to site by MT incld. Loading, unloading all complete 27 Stone aggregate for an average lead of 10. 00 28 Sand for an avg: lead of 15 Kms 29 Providing and Fixing or water closet squatting pan (indian type w.c. pan) with 100 mm sand cast iron P or S trap, 10 Ltre low level white P.V.C flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) wherever required. White vitreous china Orissa pattern W.C pan of size 580x440 mm with intergral type foot rests. 30 Providing and Fixing wash basin with C.I Brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreouis China Wash basin size 550x400 mm with a 15 mm Brass single hole basin mixer 31 Providing and fixing of white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings 32 Providing and Fixing of mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing rectangular shape 453x 357 mm 33 Providing and fuing toilet paper holder C.P brass 34 Providing and fixing PTMT Soap Dish holder having length os 138 mm breadth 102mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms 35 Providing and fising PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms 36 Providing anf fixing 15 mm nominal bore C. P brass bib cock of approved quality 37 Providing and fixing 15 mm nominal bore C.P brass angle value for basin mixer and geyser of approved make confirming to IS: 8931 38 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore 39 Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length 15 mm nominal bore 40 Providing and fixing 15 mm nominal bore of standard back type C.P. brass wall mixer of approved quality and make 41 P/F PVC stay and clamps for PVC pipes 42 100 mm 43 75 mm 44 P/F of bend of required degree 45 100 mm 46 75 mm 47 P/F of Plain bends 48 100 mm 49 75 mm 50 P/F of Tee-Jucntion 51 100 mm 52 75 mm 53 P/F of PVC reducer 100-75 mm dia 54 P/F of CP grating 100 mm dia 55 P/F of bend of Door Bend 56 100 mm 57 P.F of Gysers of approved make and manufacture with all fittings 50 litre Gyser 58 Providing and fixing 3 layer PP-R(Poly propylene Random copolymer)pipes conforming to 15: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-Incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 59 PN-16 pipe, 25 mm OD 60 PN-16 pipe, 32 mm OD 61 P/F of PPR Unions 62 PPR union , 25 mm 63 PPR Union , 32 mm 64 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 65 Providing, Fixing, Testing & Commissioning PVC SWR pipes (Type-B) for soll, waste and vent with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in R.C.C/brick work (slab/beam/wall) and making good the floors, beams and walls with cement mortar where required complete of outer diameter. (Soil/ Waste pipe) ISI MARK) 66 100 mm dia 67 150 mm dia 68 75 mm dia 69 50 mm dia 70 Constructing brick masonry chamber for underground C. inspectionchamber and bend with common burnt clay (non moduler) bricks of clan designation 7.5 in cement mortar 14 (1 cement: 4 coarse sand) CL. cover with frame (light duty) 453620 mm Intermal dimensions RCC. top slab with 1:14:3 mix (1 cement: 1% coarse sand: 3 graded stone eggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 flere sand: 10 graded stone aggregate 40mm nominal sien), inside plastering 12 mm thick withcement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc, complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line 71 Engagement of Carpenter for Refixing of existing doors and windows 72 Electrification 73 Wiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch , modular plate and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make ) excl. cost of conduit. 74 Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent ) excl. cost of conduit 75 Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 6 pin 15/16 A modular socket outlet and 15/16A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent) 76 Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 2 no. 3 pin 5/6 A modular socket outlet and 2 no. 5/6A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or eq.) 77 Supply and installation of 32A Industrial/modular plug/socket with 32A DP MCB for ACs 78 Point wiring for 5A -10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface conduiting system and earthing the point with 1 x 2.5 sq. mm single core copper wire (loop earthing),(Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent) excl. cost of conduit 79 Supply, installation, testing and commissioning of 12 Watt LED recessed/ mounted (round or square) Down lighters , minimum 80lm/w, average life 50000 hours, LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India , Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of one year reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro). 80 Supply, installation, testing and commissioning of 1 star 1200 mm sweep ceiling fans of Havells / Crompton /Bajaj/ Anchor , incl. cost of extension of GI rod (if required) and making of necessary connections. 81 Supply and fixing of single module stepped electronic fan regulator on the existing modular plate switch box, incl. connections but excluding modular plate etc. as reqd. 82 Supply, installation, testing and commissioning of 200-300 mm sweep shutter type exhaust fans, incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections. (Havells/ Philips/ Crompton). 83 Supply, installation, testing and commissioning of 50Watt LED Flood lighting luminaries having aluminum body, minimum 80lm/w, the luminary housing should be aluminum and the luminary optics shall have a high efficiency with transmittance, average life 50000 hours, Operating temperature -10`C to +45`C. LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro). 84 Supplying and fixing of modular blanking plates on existing modular plate and switch box ,excluding modular plate as required. 85 Wiring for sub mains along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, excl. cost of conduits(Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent). 86 2 x 2.5 sq.mm + 1x 2.5 sq. mm earth wire 87 2 x 4 sq.mm + 1x 4 sq. mm earth wire 88 2 x 10 sq.mm + 1x 6 sq. mm earth wire 89 Supply and fixing of 16 way Double door surface/ recess mounting , Vertical/ Horizontal type, 240 V, SP&N MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer. . 90 Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. 91 Supply, installation, testing and commissioning of 32/40 A DP rating 240V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. 92 Supply, installation, testing and commissioning of 63 A DP rating 240V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. 93 Supply, installation, testing and commissioning of wall/floor mounted compartmentalized , main distribution panels, fabricated out of 16 gauge sheet steel, dust protected, painted, incl. earth terminal with all necessary accessories with internal wiring as required. The panel is to be provided with the following adjustable type controlling/ protection switch gear devices: 1.NORMAL INCOMING 125A DP MCB 10KA 01 no. 200A SP&N bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. 2. Generator INCOMER 63A change over switch 01 no. 100A SP&N bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. . OUTGOING 63A DP MCB 10KA 03 no. 40A DP MCB 10KA 03 no The contractor has to submit the test certificate of main switch gear. 94 Providing of chemical earthing as per IS standards by way of digging 6 feet pit then embedding 2.5 mtr. Long GI earthing electrode, 60 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2” dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound. 95 Supply and fixing of 25 mm dia. Medium grade PVC conduit including its allied accessories like bends and concealed deeps, etc. for laying of wires, recessed in RCC slab / walls including resurfacing of walls or fixed with necessary clips and rowel plugs complete. 96 Supply and fixing of fan deep made of heavy gauge sheet in RCC slabs. Please Enable Macros to View BoQ information
|
