Tender For Repair To All Types Of Steel Furnitures And Steel Chairs Incl Painting At Mil Stn Agartala in India

Work Detail

Tender For Repair To All Types Of Steel Furnitures And Steel Chairs Incl Painting At Mil Stn Agartala; 1 Repair to Table dining ORs (Steel) 2 Maintenance & Labour for repair to steel frame by welding of table dining ORs of required (100mm to 200mm long) length of square MS tube of shape and size as existing including necessary welding and removing of old unserviceable tube all as directed and shown on drg. 3 Taking down unserviceable table top from the existing table dining ORs steel and S&F new table top made of 18 mm thick block board commercial, BWR grade, covered with 24 guage aluminium sheet as per existing size as shown in drg, and fixing with screws on table frame complete all as specified and directed by Engr-in-charge. 4 Supply & fixing new hard rubber shoes including removing of old UNSV rubber shoes from leg of table dining Ors all as specified and directed byEngr-in-charge. 5 Material & labour for applying one coat of synthetic enamel black paint to frame of table dining ORs including preparation of surfaces all as specified & directed by Engr-in-charge. 6 Repair to Almirah steel large FD-67(M)/ 1031/Almirah Med FD 243/ 1032/ Almirah small FD-350 7 Removing of old unserviceable handle of almirah large/ medium and small steel and S&F new handle 125 mm long of cast iron zinc chromium plated coated of Godrej pattern with nuts and bolts complete all as shown on drawing and as directed by Engr-in-charge. 8 Removing of old unserviceable locks of almirah large/ medium steel and S&F new steel locks of 50 mm size of 6 levers special type with nuts and bolts including two steel keys complete all as shown on drawing and as directed byEngr-in-charge. 9 Removing of old unserviceable butt hinges of almirah large/ medium steel and S&F new butt hinges of 65 to 75 mm size and adjusting door by revitting / welding complete all as shown on drawing and as directed by Engr-in-charge. 10 Removing of old unserviceable locking devise of almirah large/ medium /small steel and S&F new locking devise complete all as shown on drawing and as directed byEngr-in-charge. 11 Replacement of UNSV angle iron cleat with new one for steel almirah large/med/small as shown on drg and as directed by Engr-in-charge 12 Removing of old unserviceable broken legs of almirah large steel and S&F new legs of 1 mm thick MS sheet as per shape and size as shown on drawing and as directed by Engr-in-charge. 13 Removing of old unserviceable broken legs of almirah Med/small steel and S&F new legs of 1 mm thick MS sheet as per shape and size as shown on drawing and as directed by Engr-in-charge. 14 Painting of almirah large steel-Preparation of surfaces i.e removing old paint de restuing, filliing all holes and cracks or detoriated spots of old painted steel furniture with primer, (Internally /externally) putty than applying two coat spray painting of synthetic enameled paint of Ist Gde, shade smoke grey/olive green as approved by AGE (I), complete all as directed by Engr-in-charge. 15 Painting of almirah Medium steel-Preparation of surfaces i.e removing old paint de restuing filliing all holes and cracks or detoriated spots of old painted steel furniture with primer, (Internally /externally) putty than applying two coats of spray painting of synthetic enameled paint of Ist Gde, shade smoke grey/olive green as approved by AGE , complete all as directed by Engr-in-charge. 16 Locker bed side steel :- 17 Removing of old unserviceable MS hinges of locker bed side steel and S&F new MS hinges 65 mm long with gas welding / revitting complete all as shown on drawing and as directed. 18 Removing of old unserviceable legs of lockers bed side steel and S&F new legs of 1 mm thick MS sheet as per shape and size as shown on drawing and as directed by Engr-in-charge. 19 Removing of old unserviceable handle of locker bed side steel and S&F new MS chromium plated handle 100 mm long complete all as shown on drawing and as directed by Engr-in-charge. 20 Removing of old unserviceable hasp and staple of locker bed side and S&F new CP steel hasp and staple 75 mm long and fixed with screws complete all as shown on drawing and as directed by Engr-in-charge. 21 Removing of old unserviceable locks of locker steel and S&F new steel locks of 50 mm size of 6 levers special type with nuts and bolts including two steel keys complete all as shown on drawing and as directed by Engr-in-charge. 22 Removing of old unserviceable locking devise of lockers steel and S&F new locking devise complete all as shown on drawing and as directed by Engr-in-charge. 23 M&L for tighting of loose shelves with mild steel revitting /spot welding complete all as directed by Engr-in-charge. 24 Painting of Locker bed side steel-Preparation of surfaces i.e removing old paint de restuing filliing all holes and cracks or detoriated spots of old painted steel furniture with primer, (Internally /externally) putty than applying two coats of spray painting of synthetic enameled paint of Ist Gde, shade olive green complete all as directed by Engr-in-charge. 25 4. Table office Officer/ Clk steel :- 26 Removing old/unservicavle top from table office officer steel and S & F new top of prelaminated particle board melamine faced one side decorative 18 mm thick as per shape and size shown in drawing with 4 mm thick teak wood beading fixed with nails including french polishing to beading complete all as specified and directed. 27 Removing old/unservicavle top from table office clk steel and S & F new top of prelaminated particle board melamine faced one side decorative 18 mm thick as per shape and size shown in drawing with 4 mm thick teak wood beading fixed with nails including french opolishing to beading complete all as specified and directed by Engr-in-charge. 28 Removing old/unservicavle drawer and drawer box from table offfice clk/Officers steel and S & F new drawer and drawer box made of 1 mm thick sheet as per shape and size of the existing table and welding whereever required complete all as specified and directed by Engr-in-charge. 29 Removing old/unserviceable legs from table office clk / Officers steel and S & F new legs made of 25 mm squire pipe 1.6 mm thick as per shape and size of the existing table and welding where ever required complete all as specified and directed. 30 Removing old/unserviceable Recess handle from table office clk/ officers steel and S & F new rises handle as per shape and size shown in drawing. 31 Removing old/unserviceable locks of table office clk/ Officers steel and S & F new locks with two key as per shape and size. 32 Replacing of broken rubber shoe of table office clk/officers steel and S & F new rubber shoe all as specified and directed. 33 Painting of Table office clk steel-Preparation of surfaces i.e filliing all holes and cracks or detoriated spots of old painted steel furniture with primer, (Internally /externally) putty than applying two coat spray painting of synthetic enameled paint of Ist Gde, shade smoke grey/olive green as approved by AGE, complete all as directed by Engr-in-charge. 34 Painting of Table office officer steel-Preparation of surfaces i.e filliing all holes and cracks or detoriated spots of old painted steel furniture with primer, (Internally /externally) putty than applying two coat spray painting of synthetic enameled paint of Ist Gde, shade smoke grey/olive green as approved by AGE, complete all as directed by Engr-in-charge. 35 Book Case Steel :- 36 Removing old/unservicavle Shutter frame from book case steel and S & F new shutter frame made of 1 mm thick sheet as per shape and size of the existing Book case steel and welding whereever required complete all as specified and directed. 37 Removing old/broken glass pane from Shutter frame of book case steel and S & F new glass pane as per shape and size of the existing Book case steel complete all as specified and directed by Engr-in-charge. 38 Removing old/unserviceable locks of Book Case steel and S & F new locks with two key as per shape and size. 39 Removing old/unserviceable handle from Book case steel and S & F new handle chromium plated 100mm long as per shape and size shown in drawing. 40 Painting of Book case steel-Preparation of surfaces i.e filliing all holes and cracks or detoriated spots of old painted steel furniture with primer, (Internally /externally) putty than applying two coats spray painting of synthetic enameled paint of Ist Gde, shade olive green complete all as directed by Engr-in-charge. 41 Teapoy Verandah 42 Taking down unserviceable teapoy top from the existing teapoy verandah and S&F new table top made of 18 mm thick pre-laminated board Make: Kitply/Greenply providng 4mm thick Teakwood beading of two coats of french polish of best quality all-round the top.complete all as specified and directed by Engr-in-charge. 43 Taking down unserviceable flat iron 25mm X 3mm X 412mm length from the existing Teapoy Verandah and S&F new flat iron 25mm X 3mm X 412mm length including welding.complete all as specified and directed by engineer-in-charge 44 Supply & fixing new hard rubber shoes including removing of old UNSV rubber shoes from leg of Teapoy verandah all as specified and directed by Engr-in-charge. 45 Painting of Teapoy Verandah-Preparation of surfaces i.e filliing all holes and cracks or detoriated spots of old painted steel furniture with primer, (Internally /externally) putty than applying two coats spray painting of synthetic enameled paint of Ist Gde, shade White complete all as directed by Engr-in-charge. 46 Table steel 900 X900 X 760mm 47 Maintenance & Labour for repair to steel frame by welding of table steel 900 X 900 X 760mm of required (100mm to 200mm long) length of square MS tube 25mm dia 1.6mm thick of shape and size as existing including necessary welding and removing of old unserviceable tube all as directed and shown on drg. 48 Taking down unserviceable table top from the existing table steel 900 X 900 X 760mm and S&F new table top made of 18 mm thick pre-laminated board Make: Kitply/Greenply providng 4mm thick Teakwood beading of two coats of french polish of best quality all-round the top.complete all as specified and directed by Engr-in-charge. 49 Supply & fixing new hard rubber shoes including removing of old UNSV rubber shoes from leg of table steel 900 X 900 X 760mm all as specified and directed by Engr-in-charge. 50 Painting of table steel 900 X 900 X 760mm-Preparation of surfaces i.e filliing all holes and cracks or detoriated spots of old painted steel furniture with primer, (Internally /externally) putty than applying two coats spray painting of synthetic enameled paint of Ist Gde, shade olive green complete all as directed by Engr-in-charge. 51 Charpoy GI pipe FD-220 52 Removing existing unserviceable ply from charpoy GI pipe and re-assembling the frame andS & F new 12mm thick new ply top of size 1980x900x12mm of BWR grade commercial (Make : Kit ply/National/ Century/Green Ply, Archid Ply, Bhutan Ply) with wooden beading complete all as specified and directed by Engr-in-charge. 53 Replacing of UNSV long rail, supply and fixing with new long rail of GI pipe 32mm dia medium grade ISI marked (Make : TATA/Jindal) with 22 mm threading at one end & 40mm on other end all as per drg. as directed by Engr - in- charge and approved by AGE (I) Agt. 54 Taking out old unserviceable short rails of charpoy and fixing only short rail made out of old long rail retrieved item no. 8.02 here-in-before with and including, cutting threading at both ends ( 22 mm threading at one end & 40mm on other end) as per drg complete all as specified and direced and as per drawing. 55 Taking out old unserviceable legs of charpoy and fixing only legs made out from balance cutting piece of old long/short rail retrieved item no. 8.02 & 8.03 here-in-before with and including, cutting threading at one end ( 22 mm threading at one end & 40mm on other end) with flat iron 02 Nos of size (50x6mm)x860mm long duly welded in both side in equal distance on bottom side of GI pipe duly applied one coat or red oxide and two coats of black synthetic enamelled paintas per drg complete all as specified and direced and as per drawing. 56 Replacing of existing unserviceable/broken stiffeners and supply and fixing two nos of stiffeners of 32mm x 25mm size with wall thickness 1.6mm rectungular MS tube shall be welded with each side with long rail in equal distence of the charpoy to support the plywood duly applied one coat or red oxide and two coats of black synthetic enamelled paint complete all as directed Engr in charge. 57 Replacing of existing old broken GI elbow and supply and fixing new GI elbow shall be MS galvanised, three way 32mm dia med grade ISI mark. Weight of GI elbow 3 way shall be not less than 450gms 58 Replacing of existing old broken check nut and supply and fixing new 32 mm dia 10mm thick check nut ISI marked as approved by GE. Weight of check nut shall not less than 100 grm each 59 Replacing of existing old broken nut bolt & washer and supply and fixing new 10 mm dia nut bolt & washer and 75mm long, ISI marked as approved by AGE(I). 60 Outer surface of GI frame shall be painted with two coats of aluminium paint including supply and fixing 04 Nos hard rubber shoes with inside steel washers to the legs of charpoy after removing the existing wooden block complete all as specified and directed. 61 Chair CB steel with and without arms FD - 75(M) 62 Seat frame with canning as per drg 63 Back rest frame with canning as per drg 64 Hand rest as per drg 65 Iron cleat off size 65 x 19 x 3mm thick as per drg 66 Plastic hard rubber shoe as approved by AGE(I) Agt 67 Chair varandha 68 Removing of old worn out plastic cane from chair varandha and supply and recaning new 4mm wide white plastic cane of best quality and in mat pattern complete all as per drg. 69 Replacing of existing worn out hard rubber shoe and supply and fixing new hard rubber shoe as approved by as AGE (I) Agt. 70 M & L for painting of following steel furnitures by preparation of old painted surfaces of steel furnitures and painting with synthetic enamel paint (Make: Asian/berger/Nerolac) of approved shade to steel surfaces complete all as specified by engr in charge and approved by AGE (I) Agt. 71 Chair CB Steel With or Without Drawer FD 75 (M) 72 Chair Varandah FD 256/259

Contact Information