|
Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, Conventional Lease Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af_03/2024, Manual Excavation For Baldrame Beam Or Running Footing - (Including Excavation For Placing Formwork). Af_01/2024, Manufacture, Assembly And Disassembly Of Shoe Formwork, In Sawn Wood, E=25 Mm, 4 Uses. Af_01/2024, Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 5 Mm Ca-60 Steel - Assembly. Af_01/2024, Baldrame Beam And Running Shoe Using 8 Mm Ca-50 Steel - Assembly. Af_01/2024, Block Frame, Insulated Footing, Baldrame Beam And Running Footing Using 12.5 Mm Ca-50 Steel - Assembly. Af_01/2024, Concrete Fck = 30Mpa, Mixture 1:2, 1:2, 5 (In Dry Mass Of Cement/Medium Sand/Gravel 1) - Mechanical Preparation With 600 L Concrete Mixer. Af_05/2021, Launch Using Pump, Thickening And Finishing Of Concrete In Structures. Af_02/2022, Baldrame Beam And Running Shoe Using 16 Mm Ca-50 Steel - Assembly. Af_01/2024, Concrete Fck = 25Mpa, 3:2, 7 (In Dry Mass Of Cement/Medium Sand/Gravel 1) - Mechanical Preparation With 600 L Concrete Mixer. Af_05/2021, Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, Manufacture Of Formwork For Beams, With Sawn Wood, E = 25Mm. Af_09/2020, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10 Ca-50 Steel, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 12.5 Mm Ca-50 Steel - Assembly.Af_06/2022, Manufacture Of Formwork For Pillars And Similar Structures, E=25 Mm. Af_09/2020, Unidirectional Precast Slab, Double Supported, For Lining, Ceramic Filling, Conventional Beam, Total Slab Height (Filling+Cover) = (8+3). Af_11/2020, Slab Frame Of Conventional Reinforced Concrete Structure Using Steel Ca-50 Of 6, Slab Frame Of Conventional Structure Of Reinforced Concrete Using Steel Ca-50 Of 8, Mechanical Protection Of Horizontal Surface With Cement And Sand Mortar, Trace 1:3, E=2Cm. Af_09/2023, E = 25 Mm. Af_09/2020, Manufacture Of Formwork For Slabs, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Steel Ca-50 Of 8, Slab Frame Of Conventional Structure Of Reinforced Concrete Using Steel Ca-60 Of 5, Execution And Compaction Of Landfill Body (95% Of Normal Proctor Energy) With Predominantly Clayey Soil Thickness 15 Cm - Exclusive Material, Excavation, Loading And Transport. Af_09/2024, Ballast With Granular Material, Applied On Floors Or Slabs On Ground, Thickness Of *5 Cm*. Af_01/2024, Application Of Plastic Tarpaulin For Execution Of Concrete Floors. Af_04/2022, Subfloor In Mortar Mix 1:4 (Cement And Sand), Mechanical Preparation With A 400 L Concrete Mixer, Applied In Dry Areas On Slab, Adhered, Non-Reinforced Finish - Thickness 4Cm. Af_07/2021, Ceramic Floor Coating With Enamelled Type Plates Of Dimensions 60X60 Cm Applied In Rooms With An Area Larger Than 10 M2. Af_02/2023_Pe, Fence Masonry Made Of Vertically Drilled Ceramic Blocks Of 14X19x39 Cm (Thickness 14 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, Contrave
|
