|
Support Base In Pre-Molded Reinforced Concrete, Intended To Support A Water Tank With A Nominal Capacity Of 5,000 Liters, Manufactured In Accordance With Current Technical Standards, With Structural Strength Compatible With The Total Load Of The Full Tank, Including Its Weight And Usage Overloads. It Must Be Made Of Structural Concrete With Minimum Compatible Strength (Fck ≥ 20 Mpa), With Ca-50 Or Ca-60 Steel Reinforcement, Appropriately Sized To Guarantee Stability, Safety And Durability., Suitable For Supporting A Water Tank With A Capacity Of 10,000 Liters, Sized To Safely Support The Total Weight Of The Full Box. Manufactured In Structural Concrete Of Adequate Strength (Fck ≥ 20 Mpa Or Higher, Depending On The Project), Reinforced With Ca-50 Or Ca-60 Steel, Ensuring High Load Capacity, Structural Stability And Long Service Life. It Must Present A Level Support Plane, Dimensions Compatible With The Diameter Of The Box, Regular Edges And A Uniform Finish, Allowing Safe And Adequate Installation., Pre-Molded Base In Reinforced Concrete, Intended For Supporting A Water Tank With A Capacity Of 15,000 Liters, Designed To Support Permanent And Variable Loads, Observing Structural Safety Criteria. Structural Concrete With Compatible Minimum Strength (Fck ≥ 25 Mpa Or According To Technical Specification), With Suitable Reinforcement In Ca-50 Or Ca-60 Steel., Support Base In High-Reinforced Pre-Molded Concrete, Suitable For Water Tanks With A Capacity Of 20,000 Liters, Designed To Support High Loads With Safety And Stability. Produced In Structural Concrete With Compatible Resistance (Fck ≥ 25 Mpa Or Higher), With Appropriately Sized Reinforcement, Ensuring Structural Robustness And Durability. Non-Toxic, Resistant To Uv Rays, Weather And Climate Variations, Suitable For Storing Drinking Water. It Must Have A Top Sealing Lid, Which Prevents The Entry Of Dirt, Insects And Contaminating Agents, With A Secure Fitting System., Water Tank With A Capacity Of 15,000 Liters, Made Of High-Density Polyethylene (Hdpe), Non-Toxic, Resistant To The Weather, Solar Radiation And Common Chemical Agents. Equipped With A Top Lid With Adequate Sealing, Ensuring Protection Against External Contamination., Water Tank With A Nominal Capacity Of 20,000 Liters, Made Of High-Density Polyethylene (Hdpe) Or Equivalent Material, Suitable For Storing Drinking Water, In Accordance With Applicable Technical And Sanitary Standards. It Must Have A Lid With An Efficient Seal, Guaranteeing The Protection Of The Reservoir Against External Agents.
|
