|
Worm Screw Bar - In Galvanized Iron, Dimensions: 5/16 Inch, 3 Meter Bar., Cat Hanging Type Nylon Cable Tie 20 Cm X 2.5 Mm, Color: Black, Material: Polyamide 6.6 (Nylon 66). Tensile Strength: Minimum 8 Kgf (80N), Locking Type: Internal Toothed Locking System (Self-Locking, Single Use), Finish: Smooth Surface, No Burrs, With Chamfered Tip To Facilitate Insertion, Recommended Use: Internal And External. Non-Toxic, Non-Corrosive Product With Good Dimensional Stability., Nylon Cat Hanging Cable Tie 15 Cm, Width: Minimum 2, Material: Polyamide 6.6 (Nylon), Minimum Tensile Strength: 8 Kgf (80N), Locking Type: Internal Toothed Locking System With Self-Locking Ratchet (Single Use), Non-Corrosive., Worm Thread Clamp For 1 Inch Pipes (16 Mm And 25 Mm). Material: Stainless Steel Or Zinc Plated Steel, Corrosion Resistant. Finish: Polished Or Zinc-Plated Surface For Greater Durability And Protection Against Rust. Tightening Mechanism: Worm Screw, With Coupling System That Allows Safe And Firm Adjustment. Application: Fixing And Sealing Hoses In Hydraulic Pipes, Water Systems, Compressed Air, Fuel And Other Industrial Or Residential Installations, Use In Flexible Hoses And Small Diameter Tubes., Pvc Cable Tie 10 Cm X 2, Cat Hanging Type. Minimum Specifications: Material: Polyamide 6.6 (Nylon) Or High-Resistance Pvc, Locking Type: Internal Self-Locking Tooth, Minimum Tensile Strength: 8 Kgf, Non-Toxic And Non-Corrosive Product, Resistant To Uv Rays And Chemical Agents (Oil, Grease, Fuels)., Adapter With Weldable Flange 20 Mm X 1/2 Bsp. Weldable Connection At One End With Nominal Diameter Of 20 Mm And 1/2 Bsp Thread (Male Or Female). It Has A Flange With A Hole For Fixing It To Boxes, Panels Or Tanks. Made Of Polypropylene (Pp), Pvc Or Ppr, Resistant To Pressure And Continuous Use In Hydraulic Systems. Thread With Excellent Sealing And Compatible With Cold Water Systems, Irrigation, Tanks And Other Applications., Adapter With Weldable Flange 25 Mm X 3/4 Bsp. Connection Composed Of A Weldable End With A Nominal Diameter Of 25 Mm And A 3/4 Threaded Outlet, Which Can Be Male Or Female. Equipped With A Fixing Flange With A Hole, Ideal For Installations In Water Tanks, Reservoirs, Panels, Irrigation Systems And Hydraulic Networks. Made From Resistant Material Such As Polypropylene (Pp), With High Durability, Efficient Sealing And Resistance To Chemicals And Weather. Simple Installation By Thermofusion Or Adhesive, Depending On The Type Of Tube Used., Adapter With Weldable Flange 32 Mm X 1 Bsp. Part Intended For The Transition Between 32 Mm Weldable Piping And 1 Threaded Connection, Which Can Be Male Or Female Threaded, Made Of Resistant Material Such As Polypropylene (Pp), Suitable For Cold Water Hydraulic Systems, Reservoirs And Building Networks. It Has A Flange With A Hole For Fixing To Boxes, Tanks Or Panels, Providing Secure Sealing And Stable Installation. High Resistance To Pressure, Durability Against Weathering And Chemical Agents. Installation By Thermofusion Or Plastic Adhesive (Depending On The Type Of Tube)., Adapter With Weldable Flange 40 Mm. Part Used For Transition Between 40 Mm Weldable Piping And Threaded Connection, With Flange For Fixing. Weldable End With Nominal Diameter Of 40 Mm, Compatible With Pvc Or Ppr Tubes, And Standard Bsp Threaded Outlet, In Standard Version
|
