Tenders Are Invited For Vehicles For Refuse And Sewage – Suction-Pressure Tank Truck - Delivery in Germany

Work Detail

Vehicles For Refuse And Sewage – Suction-Pressure Tank Truck - Delivery. Procurement Of Suction-Pressure Tank Truck For Amt 90 Drainage Company, Sewer Network Department - Delivery Of A 3-Axle Truck With High-Pressure Flushing And Suction-Pressure Tank Truck With Water Recovery: This Truck With High-Pressure Flushing And Suction-Pressure Tank Truck With Water Recovery Is To Be Used In The Sewer Network Department Of The Erfurt Drainage Company, Specifically It Will Be Used In The Sewer Operation Master Area. The Commercial Vehicles Area Of ​​Responsibility Includes Cleaning Sewers Of Different Diameters Using High-Pressure Flushing Processes With Simultaneous Suction Operation In The Shaft. Equipping With A Water Recovery System In Order To Be Able To Carry Out Further Sewer Cleaning With The Extracted Wastewater Is A Mandatory Criterion For The Erfurt Drainage Company Due To The Extensive Area Of ​​​​Operation Throughout The City As Well As In Villages In The Erfurt Area. In Addition, The High-Pressure Jetting Vehicle Is Used To Clear Blockages In Sewers In The City As Part Of Emergency Operations By The Sewer Network Department. The Use Of The Suction Pressure Tanker Also Includes The Suction And Cleaning Of Pump Reservoirs At Numerous Pumping Stations In The Catchment Area Of ​​The Erfurt Drainage Company. The Following Minimum Technical Requirements Are Necessary For The Vehicle: - Water Recovery Technology - 1-Container System With An Adjustable Partition To Divide The Container Into Water And Sludge Chambers - Vacuum Pump With A Delivery Capacity Of At Least 2,000M³/H - High-Pressure Pump With A Flushing Capacity Of At Least 340 Liters/Minute At 200 Bar Pressure - Digital High-Pressure Display - Suction Hose Reel For Holding A Dn 125 Suction Hose - Telescopic Suction Hose Boom With At Least 4,400Mm Working Range From The Center Of The Vehicle - Sewer Flushing Hose Dn 25: 200 Meters - Sewer Flushing Hose Dn 13: 80 Meters - Nozzle Display 1 Inch For Water Recycling System According To Specifications - Water Treatment With Combination Of Filters, Sedimentation And Cyclone Filters - Can-Bus Control - Radio Remote Control Included - Built On 3-Axle Chassis, Total Technical Weight: 26,000 Kilograms - Central Lubrication Blocks And Closed Stainless Steel Equipment Boxes - Vehicle Acceptance According To §13 Ec - Foil Warning Marking According To Din 30710 - Vehicle Painting In Ral 2011

Contact Information