Online Tender For Supply Of Furniture Items In The Institute in India

Work Detail

Online Tender For Supply Of Furniture Items In The Institute; 1 Furniture Description 2 Steel almirah 1. Overall Dimensions: H1980 x W915 x D485mm 2. Material: Prime quality MS CRCA sheets 1.0mm for front, side and shelves & 0.8mm for back. 3. No. of shelves: Four forming five compartments. Suitable arrangement shall be provided for adjusting the shelves as per requirement. 4. Locking Mechanism: Three way bolting device with six levers superior quality standard make lock with duplicate keys. 5. Pedestal: Made of 1mm MS CRCA sheet. Height125mm. 6. Hinges: Double folded type hinges made of MS CRCA sheet thickness 1.8mm to 2.0mm. Three hinges for each door leaf. 7. Finish: Almirah shall be powder coated after seven tanks anti corrosion pretreatment. 8. All the accessories shall be superior quality and standard make. 9. The overall appearance of the product shall be as per photograph in Bid document. 3 Library rack 1. Overall Dimensions Size: (a) Single Side Main Unit - DX-52A : 915mmx D-380mm x H-1980mm. (b) Single SideAdon Unit - DX-53A : 915mmx D-380mm x H-1980mm. (c) Double Side Main Unit, - DX-54A : 915mmx D-535mm x H-1980mm. (d) Double SideAdon Unit - DX-55A : 915mmx D-535mm x H-1980mm. 2. Body Structure: Made up of prime quality CRCA sheet 1.0mm thick 3 fold side panel with dia12mm hole in middle of each Panel throughout the height at25mmpitch for height adjustability of shelf. 3. Shelves: Made up of prime quality CRCA sheet 0.8mm thick, seven folding shelves making six compartments. 4. Back Cover: Fixed only in single sided unit (A&B), made up of press formed prime quality CRCA MS sheet 0.8mm thick. 5. Middle Separator: Made up of prime quality CRCA sheet 2 fold 3 side separator 95mm height, 0.8mm thick, fixed only in double sided unit in middle, it works as a book separator as well as a tie member between two side panels. 6. End cover: Made up of prime quality CRCA sheet 0.8mm thick in different colour shade. 7. Finish: All steel components should be epoxy powder coated after seven tanks anti corrosion pretreatment of surface. 8. The overall appearance of the product shall be as per photograph. 4 open Reck Height – 1980 mm Weight- 900 mm Depth -450 mm Self – 5 no Slotted Angle size 40*40 Sheet - 1mm 5 Wooden podium1. Overall dimension shall be H 1200 x W 750/600 x D 450mm. 2.Podium shall be made of 18mm thick MDF board ISI marked. 3. The podium shall be post formed. 4. The base shall be of 25mm commercial ply ISI marked. 5. Laminate shall be used 0.6 for post form. 6. One shelf shall be provided below the top. 7. The self shall be mounted on telescopic channels 8.Bottom shelf shall be 70mm above base. 9. The base shall be fixed on post form strips of 150mm width. 10.The edge banding shall be done by 2mm thick PVC tape by hot pressed machine of Matching colour. 11. The overall appearance of the product shall be as per photograph 6 High back chair1. Overall Dimension : (Min)- H 1185mm (Max) 1285mm. Seat Height:Min.460-Max.560mm. Depth: 660mm. and width: 640mm. Seat size 555x560 mm Back size 530x790 mm 2. Material: Seat and back made up of 12mm thick hot pressed plywood, upholstered with black or brown Leatherite fabric with 40-50 hi-density foam. The back with hi-density foam 40 is designed with contoured lumbar support for extra comfort. Foam thickness 60-100mm as per photograph. 3. The armrest one piece and made of P.P. and reinforced with M.S. insert and scratch and weather resistant and cushion by foam upholstered with same shade Leatherite fabric. 4. Castors: The twin wheel castors shall be injected moulded in black Nylon. 5. Pedestal Assy: The pedestal shall be injection moulded in black 30% glass filled Nylon with gas lift mechanism. Width 700 mm. 6. Mechanism: The tilting mechanism shall be designed with 17degree maximum tilt and shall be provided with the upright lock facility and shall have gas lift mechanism. 7. Upholstery: The seat and back are to be covered with superior quality Leatherite fabric 8. Finish: steel are to be powder coated after seven tanks anti corrosion pretreatment of surface. 9. The overall appearance of the product shall be as per photograph. 7 Executive table1. Overall size Table Top: 1675mm x 865mm with overhang of approx. 115mm on the rear and 57mmof either side. 2. Height: 750mm 3. Post formed Table top : 25mm thick MDF board ISI mark with 0.60mm (min) thick high pressure post form lamination. 4. Lipping: The edge banding of tape 2 mm thick of same shade of laminate by hot process . 5. Under Structure: Square Tubular under structure made of superior quality CRMS tube of 25mmx25x 1.2mm thick or pressed section 'C' shaped frame of 1.25 mm CRMS sheet of size 20x40x20 mm Back panel and full length foot rest is to be provided as shown in photograph. 6. Storage unit: The right side storage unit has three box drawers and pull out tray. The left side storage unit has one pullout tray, one box type drawer and one drawer for filling. 7. Pull out tray : A specially designed centre pull out tray is to be provided with height of 50mm. Central and top side trays shall be provided with compartments for keeping office items. 8. All the drawers are to be provided with telescopic sliding channel. 9. Overall Dimension of storage units: H=550mm, W=420mm, D=715mm. The thickness of storage units shall be minimum 0.80mm. 10. Locking arrangement: Suitable locking arrangement to be provided using precision locks. 11. Handles : High quality SS handles are to be used. 12. Shoes : Superior quality rubber shoes are to be provided. 13. Finish : Complete under structure to be powder coated after seven tanks anti corrosion treatment. 14. The overall appearance of the product shall be as per photograph except handles.

Contact Information