|
Tender For Supply Of Tools/ Diagnostic Devices/ Workshop Equipments Etc.; 1 Mechanic Tool set Supplying a comprehensive professional-grade The Mechanics Tool Kit with a durable, impact-resistant moulded suitcase (BMC case) with designated compartments for each component, ensuring easy portability and organization and includes the Chrome-Vanadium tools and accessories listed as Appendix 1 (Refer NIT for details) All sockets, spanners, and ratchets shall be made from Chrome Vanadium Steel (Cr-V), heat-treated, and chrome-plated for corrosion resistance. Screwdriver bits shall be of S2 Alloy Steel for high torque resistance. Ratchets shall have a minimum of 45 teeth with a quick-release and reversible mechanism. All tools shall conform to DIN / ISO standards or equivalent. Suitcase colour should be Standard Industrial Colour (Black / Blue / Grey or similar) 2 Tee Spanner Set including spanners ranging from 8 mm to 19 mm made from chrome vanadium steel (Cr-V), hardened and tempered for durability, the handle shall be T-shaped, providing maximum torque and grip and surface finish shall be nickel-chrome plated for corrosion resistance. 3 Deep Socket Set consist of sockets from 8 mm to 22 mm, made of chrome vanadium steel, fully hardened, tempered, and chrome-plated, the sockets shall have six-point or twelve-point configurations for high torque applications, suitable for use with ratchet handles and extension bars. 4 Combination plier 6" manufactured from high-grade alloy steel, with precision machined jaws, cutting edges induction-hardened for long life. Handles shall be double-dipped with insulated grips for comfort and safety. 5 Combination plier 8" manufactured from high-grade alloy steel, with precision machined jaws, cutting edges induction-hardened for long life. Handles shall be double-dipped with insulated grips for comfort and safety. 6 Circlip plier internal 7" made of high-grade alloy steel, with spring-loaded return and polished tips for easy installation and removal of internal retaining rings, Handle grips shall be PVC or rubber-coated. 7 Circlip plier external 7" made of high-grade alloy steel, with spring-loaded return and polished tips for easy installation and removal of internal retaining rings, Handle grips shall be PVC or rubber-coated. 8 Locking plier (vice grip type) 10" with drop-forged steel jaws with heat-treated teeth for firm gripping, include an adjustable screw and quick-release lever, Nickel-plated surface for corrosion protection. 9 Diagonal cutting pliers, 6", made of forged alloy steel, with induction-hardened cutting edges and insulated handles suitable for cutting wires and small metal parts. 10 Long Nose Plier 6" Made of forged alloy steel with slim tapered jaws for precision gripping and cutting in confined spaces, 6" overall length, with insulated handles. 11 Long Nose Plier 8" Made of forged alloy steel with slim tapered jaws for precision gripping and cutting in confined spaces, 8" overall length, with insulated handles. 12 Adjustable pipe wrench suitable for gripping pipes up to 40 mm diameter made of cast iron body with drop-forged steel jaws, serrated and induction-hardened and handle painted or powder-coated. 13 Adjustable pipe wrench suitable for gripping pipes up to 75 mm diameter made of cast iron body with drop-forged steel jaws, serrated and induction-hardened and handle painted or powder-coated. 14 Heavy-duty pipe wrench with jaw opening up to 110 mm made of forged alloy steel, precision-machined teeth for firm grip, designed for mechanical and plumbing use. 15 Heavy-duty filter wrench with high-tensile rubber or nylon strap and steel handle for removing large oil/fuel filters, Handle length: minimum 300 mm. Suitable for heavy machinery maintenance. 16 Medium-duty filter wrench with adjustable steel band and handle, suitable for medium-sized oil filters. Chrome-plated finish with non-slip grip. 17 Ball pein hammer with 300 gm forged steel head, hardened and tempered. Fitted with a strong fiberglass handle suitable for riveting, striking, and metal forming. 18 Soft face hammer with dual rubber striking faces to prevent surface damage. Head weight approx. 300–500 gm, handle made of fiberglass 19 Non-marring mallet hammer with rubber or plastic head 40 mm and sturdy handle. Head weight approx. 1 kg. Suitable for precision fitting without metal deformation. 20 Sledge hammer with 500 gm (2 lb) drop-forged steel head, hardened and tempered. Handle of strong wooden or fiberglass construction, securely fixed to head. 21 Cold chisels made of chrome vanadium or carbon steel (18 mm dia approax) , hardened and tempered to 58–60 HRC. Size 25 mm, length 300 mm, Approax Weight 500 gm Ground cutting edge with anti-slip striking end. 22 Steel wedges, hardened and ground, used for splitting or aligning. Made of forged alloy steel with a rust-resistant finish230 mm Length 1.5 Kg. 23 Heavy-duty adjustable torque wrench, range 70–340 Nm. 1/2" drive, accuracy ±4%, chrome vanadium construction with calibration certificate. 24 Steel scale Set (5 Nos)made of high-quality tempered stainless steel with etched and permanently engraved graduations in both metric (mm/cm) and inch units.straight, with accurately ground edges and smooth surfaces, Graduation accuracy shall conform to IS 1481:1970 or equivalent. Lengths : 150 mm, 300 mm, 600 mm, 450 mm, 1000 mm. Each scale shall have clear visibility markings and corrosion-resistant satin chrome finish. 25 Vernier calipers made of stainless steel, precision-ground and finished, with a measuring range of 0–200 mmand least count 0.02 mm / 0.001 inch capable of internal, external, depth, and step measurements. Vernier scale and main scale markings shall be clearly etched for long-term readability. The instrument shall conform to IS 3651:1981 or DIN 862 standards. A locking screw shall be provided for measurement retention, and the tool shall be supplied in a protective case. 26 Outside micrometer (0–25 mm range) of mechanical analog type, conforming to IS 2967:1975 or DIN 863 standards. The frame shall be rigid and heat-insulated, with carbide-tipped measuring faces, a friction thimble, and a ratchet stop for consistent measuring pressure. The least count shall be 0.01 mm, and the thimble and sleeve shall have clearly graduated markings. The micrometer shall be supplied with a setting standard and calibration certificate. 27 Outside micrometer (25-50 mm range) of mechanical analog type, conforming to IS 2967:1975 or DIN 863 standards. The frame shall be rigid and heat-insulated, with carbide-tipped measuring faces, a friction thimble, and a ratchet stop for consistent measuring pressure. The least count shall be 0.01 mm, and the thimble and sleeve shall have clearly graduated markings. The micrometer shall be supplied with a setting standard and calibration certificate. 28 Feeler gauges made of hardened and tempered spring steel, precision-ground to required thickness, and permanently marked with size values. The set shall include multiple 75 mm long blades of 30 differentthicknesses 0.03 mm to 1.00 mm assembled in a steel holder with pivot. Each blade shall be rust-resistant and polished for smooth operation. The gauge shall conform to IS 3179:1982 or equivalent standards. 29 Wire gauge (Standard BS 1505 type) manufactured from hardened and tempered steel with precisely cut slots for wire sizes 1 to 36 SWG. The gauge shall be circular or rectangular in shape with permanent engraved markings. The tool shall comply with BS 3737 / IS 3177 standards for accuracy. Surface shall be satin chrome or nickel plated to resist corrosion suitable for measuring diameters of wires, rods, and drill bits. 30 Inside calipers shall be made of forged steel or stainless steel, polished and hardened. The legs shall have finely ground points with a pivot joint and tension adjustment for smooth movement. Measuring range: 20–170 mm suitable for measuring internal dimensions and bore diameters. Shall conform to IS 3564:1985 standards. 31 Outside calipers made of high-grade carbon or stainless steel with hardened tips, spring joint, and knurled adjustment nut for precision. Shall conform to IS 3564:1985 or equivalent standards. Surface finish: polished or chrome-plated. 12 inch size 32 Centre punch manufactured as per IS 7177 - 1999 or equivalent, made of high carbon or alloy tool steel, hardened and tempered at the striking end and point. Length: approximately 150 mm, approximate weight 160 gm with point angle of 60° ± 2°. The striking end shall be chamfered to prevent mushrooming. Surface finish shall be black oxide or polished. Suitable for marking centers on metal surfaces before drilling operations. 33 Portable True-RMS Digital Multimeter of high-accuracy,capable of measuring AC/DC voltage up to 1000 V, AC/DC current up to 10 A, resistance, capacitance, frequency, diode, and continuity. The meter should have features like auto-ranging, data-hold, min/max, and relative measurement functions with a large back-lit display of minimum 4000 counts or higher. The instrument shall have overload protection, fused input terminals, and comply with safety category CAT III 1000 V or CAT IV 600 V as per IEC 61010-1. The unit shall be housed in a protective insulated casing suitable for field use and supplied complete with test leads, batteries, protective case, and calibration certificate. 34 Handheld Clamp Meter(True-RMS type) designed for measurement of AC and DC currents up to 1000 A, with additional functions for AC/DC voltage, resistance, frequency, and continuity. The jaw opening shall accommodate conductors up to 40–60 mm in diameter. The meter shall feature a large digital display, auto-range selection, data-hold and peak capture functions, and have an accuracy of ±2 % or better. It shall meet CAT III 1000 V / CAT IV 600 V safety standards, include overload and transient protection, and be built in a shock-resistant insulated body. The clamp meter shall be supplied with test leads, carrying pouch, and calibration certificate. 35 The Earth Tester suitable for measuring earth resistance by the three-pole fall-of-potential method or by clamp-type loop testing with a measurement range from 0.01 Ω to 2000 Ω, with a test voltage of approximately 40 V rms. Accuracy shall be within ±2 % of reading or better. It shall also measure earth voltage up to 30 V AC to indicate test conditions. The unit shall be housed in a rugged, weather-resistant case suitable for field operation, with large back-lit display, auto power-off, and data-hold features. The tester shall be supplied with auxiliary test spikes, colour-coded leads, batteries, carrying case, and calibration certificate. 36 Wire Strippers suitable for removing insulation from copper conductors ranging from 0.5 mm² to 6 mm² 37 Ratchet-type Crimping Tool designed for insulated and non-insulated terminals 1.5 mm² to 10 mm², with interchangeable dies and ergonomic handles.Alloy Steel duly Hardened & Tempered 38 Soldering Iron shall be of 40 W capacity insulated handle. Cable lugs and ferrules shall be of tinned copper, crimp type, conforming to DIN 46234/46235 standards 39 Infrared Thermometer (IR Gun) shall measure from -50 °C to +550 °C with laser targeting and digital display. should have rugged, insulated housings and be supplied with charger, carry case, and calibration certificate. 40 Battery Load Tester (12V) shall provide controlled load up to 2–200 Ah to assess battery condition by measuring voltage drop and internal resistance Instruments shall have clear displays, polarity protection, insulated clamps, and rugged enclosures for workshop use. 41 Alternator and Starter Tester shall check charging system performance, starter current draw, and voltage regulation. 42 12/24 V Test Lamp shall have a replaceable bulb or LED indicator with insulated probe and flexible lead. 43 Continuity and Fuse Tester shall provide audible and visual indication of circuit continuity and blown fuses. 44 The Fully Insulated Screwdriver Set shall comply with IEC 60900/VDE 1000 V standards, with magnetic tips and ergonomic grips. 45 Smart Battery Charger shall provide automatic multi-stage charging for 12 V batteries with protections for overcharge and polarity reversal. 46 Electric Power Drill (corded type) of reputed make, single phase 220–240 V, 50 Hz AC supply, 350 W and variable speed range up to 3000 RPM (no load). including a pistol-grip body, keyed or keyless chuck, and a 2.0 m power supply cord complying with IS 7554 / IEC 60745 / ISO 11148 or equivalent standards, [low vibration (≤3.0 m/s²) and sound pressure level below 80 dB(A)] supplied complete with chuck key, side handle (if applicable), and instruction manual. 47 Portable air compressor, of reputed make, single phase 230 V, 50 Hz AC supply, fitted with an electric motor of 2.0 HP (1.5 kW) a maximum working pressure of 8 bar, free air delivery not less than 200 LPM (7.2 CFM), and a motor speed of 2850 RPM. air receiver tank of 50 liters capacity, conforming to IS 5456 / IS 2825 standards and the compressor shall conform to IS 10437 / ISO 1217, and fitted with pressure gauge, safety valve, drain valve, and automatic pressure switch. The complete unit shall be portable, vibration-damped, and equipped with wheels and handle for easy movement. 48 Mechanical Puller (3″, 2/3-Jaw, Double Ended) of reputed make made of hardened and tempered alloy or carbon steel and finished with corrosion-resistant coating, with interchangeable 2-jaw and 3-jaw configuration, allowing both internal and external gripping applications, nominal jaw size shall be 3 inch (76.2 mm), with a spread of approximately 76 mm, reach of about 65 mm, and working diameter range from 15 mm to 80 mm, threaded spindle length 125 mm, conforming to IS 6149 / ISO 2985 standards. 49 Clutch Alignment Tool of reputed make, made of durable carbon steel, resistant to wear and corrosion, and capable of withstanding repeated workshop use. The tool shall be adjustable or provided in a set to suit various pilot bearing and clutch plate diameters (approximately 14 mm to 28 mm or equivalent range), conforming to IS 7347 / ISO 1174 or equivalent for hand tools, 50 10pcs carburetor adjusting tool kit including: 21-Teeth Splined, 7-Teeth Splined, Single D, Small Head Single D, Double D, Pac Man, Small Head Pac Ma,n Hexagon Shaped, Six Star, and carburetor cleaning tools all made of high-quality stainless steel wear resistant and long lasting with ergonomic handle comfortable to grip and stable to use. 51 Compact, durable, and easy to operate portable High-Pressure Hand-Operated Portable Grease Pump with a 10 kg grease capacity and delivers a material output of approximately 3 grams per stroke, maximum block pressure of 140 kg/cm², a 2-meter high-pressure rubber hose fitted with end connections. 52 Double Piston Lever Grease Gun delivering up to 2.4 grams of grease per stroke, pressures up to 6000 psi, with a double-piston mechanism, compact and lightweight (approx. 2 kg). 53 Durable and easy-to-use steel Lubrication Oil Dispenser Can for smooth and controlled lubrication with a 500 ml capacity, made from high-quality steel with a powder-coated finish, the can is lightweight (approx. 200 g), waterproof, and ergonomically designed for comfortable handling and precise oil flow. 54 Heavy-duty workbench constructed withsolid hardwood top, minimum 50 mm thick, the frame and legs shall be made of seasoned hardwood (such as teak or rubberwood), with a robust under-frame bracing to prevent vibration and ensure stability during heavy operations, treated and polished for durability and resistance to oil and moisture.The bench size shall not be less than 1800 mm (L) × 750 mm (W) × 850 mm (H). It shall be provided with two bench vices (125 mm or larger, cast steel body) firmly bolted to the top surface. The bench shall include a bottom shelf or cabinet for tool storage and shall have rubber or nylon feet to prevent floor damage. The structure shall be designed for mechanical servicing, fitting, and assembly work. 55 Oil Drain Pan made of high-density polyethylene (HDPE)with a capacity of 16 litres including integrated handles, a pouring spout, and anti-spill lips to prevent leakage during draining suitable for chemical resistance to engine oil, transmission fluids, and coolants. 56 Waste Oil Collection HDPE tank of capacity 50 litres, conforming to IS 2062, mounted on caster wheels with a telescopic drain bowl adjustable up to 1.5 m heightflexible drain hose,leak-proof, corrosion-resistant, and suitable for used engine oil collection and transfer, compliant with pollution control and waste oil handling norms (CPCB guidelines). 57 Industrial Wet and Dry Type Vacuum Cleaner with a power rating of 1500 W and operating voltage of 220–240 V, 50 Hz, suitable for workshop and service bay cleaning applications with a capacity of 35 litres, a vacuum suction pressure of 200 mbar and an airflow rate of 53 L/s, ensuring high-efficiency dust and liquid removal. The tank should be made of corrosion-resistant stainless steel (minimum SS 304 grade) with heavy-duty caster wheels for mobility. It should be provided with a flexible 5 m power cable, washable filters, blower function, and accessories for both wet and dry operation. The vacuum cleaner shall conform to IEC 60335-2-69 (Safety for wet and dry vacuum cleaners for commercial use) or equivalent Indian Standard IS 11621:1986, and include overload and thermal protection features for motor safety. 58 Portable, electric-operated industrial pressure washer conforming to IEC 60335-2-79 / IS 8442 with a power rating of 1700 W (230 V, 50 Hz single-phase supply) and a maximum working pressure of 130 bar and a flow rate of 7 litres per minute, with self-priming capability of 0.5 m, high-pressure foam detergent system, 6 m PVC hose, manual hose reel, 5 m power cable, 3-in-1 nozzle and ergonomic handle 59 ABC powder type Fire extinguishers, IS 15683:2018 compliant, portable type with a minimum capacity of 4 kgsuitable for Class Afires. Dry chemical powder (mono ammonium phosphate) based, stored pressure type with working pressure of 15 bar,suitable for electrical and combustible material fires.Extinguisher should have ISI certification, pressure gauge, discharge nozzle, wall mounting brackets, and color coding as per IS 2190. They shall be factory-filled, tested at twice working pressure, and supplied with inspection tag and instruction label. 60 Foam type Fire extinguishers, IS 15683:2018 compliant, portable type with a minimum capacity of9 L, suitable for Class C fires. Stored pressure or cartridge type using aqueous film-forming foam suitable for flammable liquid fires. Extinguisher should have ISI certification, pressure gauge, discharge nozzle, wall mounting brackets, and color coding as per IS 2190. They shall be factory-filled, tested at twice working pressure, and supplied with inspection tag and instruction label. 61 Fire blanket shall be made of 840 GSM glass fiber or Kevlar-coated woven fabric, resistant to temperatures up to 550°C, conforming to IS 11871 / BS EN 1869, and provided in a quick-release wall-mount case. Standard blanket size: 2.00 m × 1.00 m for personnel protection and small fire suppression. 62 First aid box of size 32.5(H) X 28.5(W) X 8(D) cmshall conform to IS 13154 (Part 1–3), made of powder-coated metal, GI or ABS plastic, waterproof and corrosion resistant, to keep all essential medical supplies for industrial workshops (bandages, antiseptics, gauze, adhesive strips, scissors, burn cream, splints, sterile pads, and CPR mask). 63 PPE: helmets HDPE or ABS shell, IS 2925 compliant, chin strap, sweatband, impact-resistant up to 50 Joules. 64 PPE: goggles Polycarbonate lenses, anti-scratch and UV-resistant, IS 5983 / EN 166 compliant, side shields. 65 PPE Industrial Gloves: For mechanical work—leather or nitrile (IS 6994); for chemical work—PVC/neoprene (EN 374); for electrical insulation—rubber Class 0 (IS 4770). 66 PPE: Safety Boots confirming to IS 15298 / EN 20345 compliant, steel/composite toe cap (200 J impact), oil- and slip-resistant sole, steel mid sole antistatic. 67 PPE: Protective Overalls with 100% cotton 210 GSM or fire-retardant fabric, full-sleeve, high-visibility reflective tapes per IS 15748 / EN 20471. 68 Electrical Insulated Gloves conforming to IS 4770 / IEC 60903, suitable for Class 0 (1000 V AC / 1500 V DC) electrical protection, made of high-dielectric natural rubber, seamless, and rolled cuff type. Each glove shall undergo routine dielectric test at 5 kV for 1 minute with no puncture or flashover. The gloves shall be Category RC (resistant to acid, oil, ozone, and low temperature) and provided with a cotton inner liner and storage pouch. Supplied with test certificate indicating batch number, test voltage, and date. 69 Welding Face Shield suitable for full-face protection during welding, grinding, and metal fabrication works with a shield size of approximately 9" x 12", made of durable polypropylene providing high impact, heat, and corrosion resistance. The face shield shall include an adjustable ratchet-type headgear with multiple adjustment positions to ensure a secure and comfortable fit for prolonged use.The approximate weight shall be 1.5 kg or less, and the product shall be supplied as one complete unit. The face shield should conform to general industrial safety standards suitable for use in workshops. 70 Industrial-grade welding gloves suitable for providing protection, comfort, and dexterity during welding, cutting, and metal fabrication operations, made from premium split leather (cowhide or goatskin) with a minimum thickness of 1.2 mm, offering high resistance to heat, sparks, and mechanical abrasion. The inner lining shall be made of soft flame-retardant cotton or fleece, providing insulation against heat and comfort for prolonged use. Each glove shall have reinforced palm and finger patches for added durability and better grip while handling tools and hot metal objects. The gloves should be stitched with heat-resistant thread to prevent seam failure during exposure to high temperatures. The length shall not be less than 14 inches (350 mm), ensuring full hand and wrist protection, with extended cuffs to safeguard the lower forearm against welding spatter and radiant heat. The gloves should be conformed to EN 388 (Mechanical Risks) and EN 407 (Thermal Hazards) or equivalent Indian Standards (IS 6153). They shall be suitable for MIG, TIG, arc, and gas welding operations. should be heat and flame-resistant, puncture and tear-resistant, and designed for repeated use in demanding industrial environments. The pair shall be supplied in standard size (Large/Universal fit) and shall bear proper labeling indicating brand, size, and conformity to relevant standards. 71 Heavy-duty, low-profile type Hydraulic Trolley Jack suitable for lifting vehicles or machinery up to a rated capacity of 3 tons. The jack shall be constructed from high-grade steel with welded frame for superior strength and stability, a lifting range from approximately 130 mm to 465 mm, operated through a hydraulic lifting mechanism actuated by a detachable pump handle. should be equipped with a safety overload valve to prevent lifting beyond rated capacity, and precision hydraulic seals to prevent oil leakage. The unit shall feature a 360° swivel rear caster and wide front wheels for easy maneuverability. The saddle shall be grooved or rubber-coated for secure load contact. The jack shall conform to IS 7620 / ASME-PASE or equivalent standards, and shall be finished with corrosion-resistant powder coating. Supplied complete with hydraulic oil filled and ready for use. 72 The Rail Jack shall be a rugged, heavy-duty mechanical or hydraulic lifting device suitable for lifting, leveling, and aligning heavy machinery, implements, or vehicles mounted on rails or flat surfaces. The jack shall have a rated capacity of not less than 10 tons with a lifting height of 110 mm – 350 mm, operated by a mechanical ratchet lever or hydraulic pump system. The construction shall be of high-grade alloy steel with precision-machined lifting jaws and a broad, stable base to ensure safe load bearing. The jack shall be equipped with a locking pawl or non-return valve to hold the load securely at any height and a self-lowering control mechanism for smooth descent. The lifting head shall be replaceable and heat-treated for wear resistance. The unit shall conform to IS 4831 / ASME B30.1 / CE standards, finished with corrosion-resistant coating, and supplied fully assembled and tested for rated load. 73 The Tractor Splitting Stand shall be designed for safe splitting and assembly of tractors during clutch or transmission repairs. The unit shall consist of two independent rolling stands, one front and one rear, each with adjustable height and wheel-mounted base to facilitate easy alignment and movement of tractor halves. The front cradle shall support the clutch housing or engine section, while the rear stand supports the transmission or rear axle section. Both stands shall be constructed from heavy-duty fabricated steel sections with mechanical screw or hydraulic lifting arrangements providing a height range of 400 mm – 800 mm. The stands shall be fitted with locking pins, adjustable supports, and safety chains to prevent accidental movement. Load capacity shall be minimum 2 tons per pair. The entire unit shall be powder-coated for durability and conform to workshop safety standards for agricultural machinery maintenance.
|
