Tender For 2.8.1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundat ... in India

Work Detail

Tender For 2.8.1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.All Kinds Of Soil. , 4.1.5 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering - -All Work Upto Plinth Level 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). , 6.1.2 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , 6.4.2 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : , 6.13.2 Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , 5.1.2 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - A L L Work Up To Plinth Level : 1 : 1 . 5 : 3 (1 Cement : 1 . 5 Coarse Sand (Zone-Ill) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , 5.3 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). , 5.9.5 Centring And Shuttering For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , 5.9.3Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Suspended Floors, Roofs, Landings, Balconies And Access Platform , 5.22A.6 Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe 500D Or More. , 13.4.2 12 Mm Cement Plaster Of Mix : 1:6 (1 Cement: 6 Coarse Sand) , 13.6.2 20 Mm Cement Plaster Of Mix : 1:6 (1 Cement: 6 Coarse Sand) , 13.16.1 6 Mm Cement Plaster Of Mix : 1:3 (1 Cement : 3 Fine Sand) , 11.37 Providing And Laying Ceramic Glazed Floor Tiles 300 X 300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is :15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume, Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. , 8.31 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacture ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , 9.117.1 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below (Tolerance ±1Mm), With Wall Thickness 2.0 Mm (± 0.2 Mm), Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws, Joints Mitred And Plastic Welded. The Hinge Side Vertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size 19 X 19 Mm And 1Mm (± 0.1 Mm) Wall Thickness And 3 Nos. Stainless Steel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer- In-Charge , 9.124.2 Providing And Fixing Factory Made 30 Mm Thick Door Shutter Made Of Solid Pvc Foam Profile. The Styles & Rails Shall Be Of Size 75 Mm X 30 Mm Having Wall Thickness 5 Mm Including With All Complete Necessary Fittings I.E. (Tower Bolts, Handle, Sliding Door Bolts Etc). The Styles, Top & Bottom Rails Shall Have One Side Wall Thickness Of 15 Mm Integrally Extruded On The Hinge Side Of The Profile For Better Screw Holding Power. The Styles And Rails Shall Be Reinforced With M.S. Tubes Of Size 33 Mm X 17 Mmx 1 Mm Painted With Primer , All Four Corners Of Reinforcement To Be Welded Or Sealed. Solid Pvc Extruded Bidding (Push Fit Type) Will Be Set Inside The Styles And The Rails With A Cavity, To Receive Single Piece Extruded 5Mm Pvc Sheet As Panel. The Styles And Rails Will Be Mitred Cut And Joint With The Help Of Pvc Solvent Cement & Self Driven Self Tapping Screws. Single Piece Extruded Solid Pvc Lock Rail Of Size 100 Mm X 30 Mm With Wall Thickness 5 Mm & 15 Mm Integrally Extruded In The Middle Of The Lock Rail & Fixed With Styles With The Help Of Pvc Solvent Cement & Self Driven Self Tapping Screws Of Size 100Mm X 8 Mm Complete As Per Manufacturers Specifications And Direction Of Engineer-In-Charge.Decorative Finish (Both Side Wood Grained , 22.50 Providing And Laying Water Proofing Treatment In Sunken Portion Of Wcs, Bathroom Etc., By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying : A) First Layer Of Slurry Of Cement @ 0.488 Kg/Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg/ Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours. B) Second Layer Of Slurry Of Cement @ 0.242 Kg/Sqm Mixed With Water Proofing Cement Compound @ 0.126 Kg/Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours Followed With Water Curing For 48 Hours. (C) Filling Of Brick Bat Coba The Rate Includes Preparation Of Surface, Treatment And Sealing Of All Joints, Corners, Junctions Of Pipes And Masonry With Polymer Mixed Slurry. , 22.6Providing And Laying Water Proofing Treatment On Roofs Of Slabs By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying: A) After Surface Preparation, First Layer Of Slurry Of Cement @ 0.488 Kg/Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg/ Sqm. B) Laying Second Layer Of Fibre Glass Cloth When The First Layer Is Still Green. Overlaps Of Joints Of Fibre Cloth Should Not Be Less Than 10 Cm. C) Third Layer Of 1.5 Mm Thickness Consisting Of Slurry Of Cement @ 1.289 Kg/ Sqm Mixed With Water Proofing Cement Compound @ 0.670 Kg/Sqm And Coarse Sand @ 1.289 Kg/Sqm. This Will Be Allowed To Air Cure For 4 Hours Followed By Water Curing For 48 Hours. The Entire Treatment Will Be Taken Upto 30 Cm On Parapet Wall And Tucked Into Groove In Parapet All Around. D) Fourth And Final Layer Of Brick Tiling With Cement Mortar (Which Will Be Paid For Separately. For The Purpose Of Measurement The Entire Treated Surface Will Be Measured. , 17.5.1 Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350 Mm With White Pvc Automatic Flushing Cistern, With Fittings, Standard Size C.P. Brass Flush Pipe, Spreaders With Unions And Clamps (All In C.P. Brass) With Waste Fitting As Per Is : 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fittings And Cutting And Making Good The Walls And Floors Wherever Required : Single Half Stall Urinal With 5 Litre P.V.C. Automatic Flushing Cistern , 17.2.1 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type) W.C. Pan With Seat And Lid 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, Pvc Connection Pipe With Manually Controlled Device (Handle Lever), Confirming To Is:7231, With All Fittings And Fixtures Complete, Including And Making Good The Walls And Floors Wherever Required: W.C. Pan With Isi Marked White Solid Plastic Seat And Lid , 17.1.1 Providing And Fixing Water Closet (Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests , 17.7.2 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste,Pvc Connection Pipe Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: White Vitreous China Wash Basin Size 630X450 Mm With A Single 15 Mm C.P. Brass Pillar Tap , 17.28.1.2 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Flexible Pipe 40 Mm Dia , 17.16A Providing And Fixing 8 Mm Dia C.P. / S.S. Jet With Flexible Tube Upto 1 Metre Long With S.S. Triangular Plate To Eureopean Type W.C. Of Quality And Make As Approved By Engineer - In - Charge. , 17.22A Providing And Fixing Cp Brass 32Mm Size Approved Quality & Make And As Per The Direction Of Engineer-In-Charge. , 17.40.1.1 Providing And Fixing Door Bend/Heel Rest Sanitary Bend Sand Cast Iron S&S/Pvc As Per 100 Mm Is - 1729 , 17.76.1 Providing And Fixing C.P Urinal Cock Of Approved Quality And Colour. 15 Mm Nominal Bore, 80 Mm Long, 42 Mm High And 30Mm Wide With Bsp Female Threads Weighing Not Less Than 48 Gms , 18.48 Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But With Fittings And With The Base Support For Tank. , 17.35.1.1 Providing And Laying Fixing Soil, Waste And Vent Pipes : 100 Mm Dia Pvc/Sand Cast Iron S&S Pipe As Per Is: 1729 Inclduing All Fitting & Fixture I.E. Bend, Tee, Collar, Etc And Sufface Finished As Per Drawing & Specification And Direction By Engineer In Charge. , 17.39.1.1 Providing And Fixing Plain Bend Of Required Degree. 100 Mm Sand Cast Iron S&S As Per Is - 1729 , 19.4.1.1 Providing And Fixing Square-Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber With Water Tight C.I. Cover With Frame Of 300 X300 Mm Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design : 100X100 Mm Size P Type With F.P.S. Bricks Class Designation 75 , 17.32.2 Providing And Fixing Mirror Of Superior Glass (Of Approved Quality) And Of Required Shape And Size With Plastic Moulded Frame Of Approved Make And Shades With 6 Mm Thick Hard Board Backing: Rectangular Shape 1500X450 Mm , 18.53.1 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 15 Mm Nominal Bore , 17.34.1 Providing And Fixing Toilet Paper Holder : C.P. Brass , 17.72 Providing And Fixing C.P Towel Ring Trapezoidal Shape 215 Mm Long, 200 Mm Wide With Minimum Distances Of 37 Mm From Wall Face Withconcealed Fittings Arrangement Of Approved Quality And Colour, Weighing Not Less Than 88 Gms. , 17.71 Providing And Fixing Ptmt Liquid Soap Container 109Mm Wide, 125Mm High And 112Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colours Weighing Not Less Than 105 Gms , 18.49.1 Providing And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Is:8931 15 Mm Nominal Bore , 17.18.1 Providing And Fixing P.V.C. Low Level Flushing Cistern With Manually Controlled Device 10 Litre Capacity-White , 18.10.5 Providing And Fixing G.I Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc.(External Work) 40 Mm Dia Nominal Bore , 18.10.3 Providing And Fixing G.I Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc.(External Work) 25 Mm Dia Nominal Bore , 18.11.1 Providing And Fixing G.I Pipes Complete With G.I. Fittings And Clamps, Including Cutting And Making Good The Walls Etc. Internal Work- Exposed On Wall 15 Mm Dia Nominal Bore , 13.46.1 Finishing Walls With All Wether Exterior Paint Of Required Shade New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm). , 13.41.1 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer , 13.80 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , 4.17 Making Plinth Protection 50 Mm Thick Of Cement Concrete 1:3:6 ( 1 Cement : 3 Corase Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Finishing The Top Smooth. , 18.18.3 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete : 25 Mm Nominal Bore , 9.7.7.1 Providing & Fixing Float Glass Panes 4 Mm Thick Glass Pane (Weight Not Less Than 10 Kg Per Sqm) , 10.16.1 Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes , 13.61.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work , 8.2.2.2 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills , Lift Front Side, Stone Cladding Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels.Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills , Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Of Any Colour And Shade Area Of Slab Over 0.50 Sqm , Sor Misc 6-1-3 Direction And Place Identification Signs With Size More Than 0.9 Sqm Size Board. Providing And Erecting Direction And Place Identification Retro-Reflectorised Sign As Per Irc :67 Made Of Type Iv Retro- Reflective Sheeting, Vide Clause 801.3, Fixed Over Aluminium Composite Material Sheet With Overall Thickness Of 4 Mm With Area Exceeding 0.9 Sqm Fixed Over Back Support Frame Of Min 40 X 40 X 5 Mm Ms Angle Mounted On Two Nos. Of Mild Steel Circular Pipe 65 Nb ,3.2 Mm Thickness And 4.5 Meter Total Height Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M 25 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm, 60 Cm Below Ground Level As Per , Sor Misc 2-1 Cement Plum Masonry With 40% Plum & 60% 1:3:6 Cement Concrete Including Supply Of All Material, Labour, T&P Etc. Required For Proper Completion Of The Work. As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 Of Mord Specifiction , 4.1.8 1 :4:8 (1 Cement : 4 Coarse Sand (Zone-Ill) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , 4.1.3 1 :2:4 (1 Cement : 2 Coarse Sand (Zone-Ill) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , 12.50 Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5- , 12.51.1 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top , 10.16.1 Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. 10.16.1 Hot Finished Welded Type Tubes , 7.8.1 Coursed Rubble Masonry With Hard Stone (First Or Second Sort) In Superstructure Above Plinth Level And Upto Floor Five Level. 7.8.1 Masonry Work (First Sort), In Cement Mortar 1 :6 (1 Cement : 6 Coarse Sand) , 7.1.1 Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1 :6:12 (1 Cement: 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size) Upto Plinth Level With : 7.1.1 Cement Mortar 1 :6 (1 Cement: 6 Coarse Sand) , 10.25.2 Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , 11.26.1 Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) : 11.26.1 25 Mm Thick , 16.70.1 Providing And Fixing G.I. Chain Link Fabric Fencing Of Required Width In Mesh Size 50X50 Mm Including Strengthening With 2 Mm Dia Wire Or Nuts, Bolts And Washers As Required Complete As Per The Direction Of Engineer-In Charge. 16.70.1 Made Of G.I. Wire Of Dia 4 Mm

Contact Information