Tender For Provision Of Certain Sanctioned Works At (Phase - Xvi) Of Various Units At Tezpur Area Under Ge ( ... in India

Work Detail

Tender For Provision Of Certain Sanctioned Works At (Phase - Xvi) Of Various Units At Tezpur Area Under Ge (S) Tezpur - 1 Dismantling of floor, hearth or wall tiling / Paving Blocks including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed 2 M&L Vitified Ceramic tiles light shade Double charged 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough, complete all as specified and as directed. 3 M&L Coloured vitrified ceremic tiles Double charged 9-10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.42 sqm but not exceeding 1.00 sqm in vertical surface in skirting etc set and jointed :in neat cemetn slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed 4 M&L Non - skid Ceramic, Colorised tiles 7 to 8 mm thick area of eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete incl screed bed or bedding layer of mortar 15mm thick in CM 1:6for laying floor finishescomplete all as specified and as directed. 5 S&F Coloured Glazed ceramic tiles 450 x 300 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm rendering in Cement mortar 1:4, complete all as specified and as directed 6 S&F Coloured Glazed ceramic tiles 400 x 400 x 7 to 10mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in cement mortar 1:4 finished even and rough, complete all as specified and as directed. 7 Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitionsetc complete all as specified and as directed. 8 M&L 15-18mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. 9 M/L Granite (of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing completeover 15mm thick screed bed in CM 1:6 over cooking platform, complete all as specified and as directed. 10 M&L 18-20 mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing completeover 10mm thick screed bed in CM 1:4, complete all as specified and as directed 11 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbishfrom the site etc complete all as specified and as directed 12 M&L for rendering 5mm thick on concrete surfaces of ceiling of chajja etcin cement morter 1:3 finished even and smooth without using extra cement complete all as specified and as directed. 13 M&L Rendering 15mm thk 1:4 finishedfair faces of brick workfair and even smooth without using extra cement complete all as specified and as directed 14 M&L for Rendering 15 mm thick in CM (1:6) on other then fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed 15 Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and smooth without extra cement complete all as specified and as directed. 16 M&L for rendering 20 mm thick in two layers of 10mm thick and 10mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction and polyester triangular fibres shall be uniformally mixed at the rate of 0.25% (or at the rate as per manufacturer"s instructions) by weight of cement as secondary reinforcementetc complete all as specified and as directed Notes : WPC & polyester triangular fibres shall be measured and paid seperately 17 M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6for laying floor finishes complete all as specified and directed. 18 Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed. 19 M&L Prepolished Coloured Cement Concrete designers Chequered Tiles 300 x 300x 25 mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles complete including 15 mm screed bed in CM (1:6) of thicknesscomplete all as directed. 20 Demolition of brick work built in cement mortar including pillar etc below/ above ground level etc and removing to a distance not exc 50 meter. complete all as specified and as directed by Engr-in-Charge. 21 M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in Cement Mortar 1:4, complete all as specified and as directed. 22 Material and labour for (old size bricks)brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius,built in cement mortar ( 1:6) complete all as specified and as directed 23 Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar ( 1:6) complete all as specified and as directed 24 M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and as directed 25 Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as directed, complete all as specified and as directed . 26 M&L Plain Cement Concrete type C2 (1:3:6) using 40 mm graded aggregate) in Foundation, Filling and Mass Concrete, complete all as specified and as directed. 27 M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate)as in plinth protections/path/sub base etccomplete all as specifed and as directed. 28 M&L Cement Concrete 1:3:6 (40mm graded crushed stone aggregate) 100mm thick as in Paving, etc. laid in alternate Bays, finished Concrete Surfaces Even and Smooth without using Extra Cement,making impression or expanded metal,whilst the concrete is green, complete all as specified and as directed. 29 M&L 25 mm thick Plain Cement concrete type B-1,1:2:4 (20mm graded aggregate),as in subase of flooringetccomplete all as specifed and as directed. 30 Demolition of reinforced cement concrete in reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position, complete all as specified and as directed 31 M&L Formwork to Sides and Soffits of Floor or Roof Beams, Beam Haunchings, Girders, Bres-Summers, Lintels, Cantilevers, Shelves including supports, overhangs, etc. also splays between floors and beams, etc., flat, rough finished surfaces of concrete, complete all as specified and as directed. 32 M&L RCC (Nominal Mix) 1:2:4 type B-1 (Using 20mm graded stone aggreagate) as in slab, shelves supported on walls beam & coloumns in floor roof including balconies, canopies, deck slabs & shelves complete all as specified and directed.NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items. 33 Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. 34 M&L for PCC 1:2:4 (using 12.5mm graded aggr) in roof Kerbs,rounded or chamfered or haunching in chajjas to prevent water seepage into brick walls,including necessory formwork and scafolding upto a height of 8mtr including demolition of existing PCC complete all as specified and as directed. 35 M&L for providing precast cement concrete louvres and jallies, in Type B1 in 1:2:4, 55mm thick (measured solid), including all mouldings but excluding frame set in CM 1:4, complete all as specified and as directed 36 M&L for providing, precast cement concrete Type B1 in 1:2:4 Set in cement Set in cement mortar 1:4in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and as directed. 37 Material and labour for 10mm dia and overTMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. 38 Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc complete all as specified and as directed 39 Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc complete all as specified and as directed 40 M&L 1st class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and as directed. 41 S&F for factory made Solid PVC door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed. 42 S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on both face, supplying & fixing in frame at site With Wood free EPS as per specification & drawing, complete all as specified and as directed. 43 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting offrame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC stiles and plain colour PVC sheets for top rail, lock rail bottom rail on either side & as gap insert for top rail & bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheetbeading & jointed together with solvent cement all as specified and shown on drawing, complete all as specified and as directed. 44 S&F 1st class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: rebated bolection moulded bead is provided and planted round the panels (for each side)supplied and fitted to chowkats, complete all as specified and as directed. 45 S&F Factory made 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides kiln seasoned and chemically pressure treated with both face is covered with decorative face veneer (0.9mm to1mm thick) with lipping/frame to match complete all as specified and as directed 46 S&F 1st class hardwood 30 mm thick made glazed and skeleton shuttersopen rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed. 47 S&F Factory made 25mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides kiln seasoned and chemically pressure treated with both face is covered with decorative face veneer (0.9mm to1mm thick) with lipping/frame to match complete all as specified and as directed. 48 S&F standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE) frame for doors, windows ventilators and grills with one or more rebates including joining cleat for fixing etccomplete shall as specified etc complete all as specified and as directed 49 S&F Standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE) for window (sliding three track/two track/fixed) and ventilator shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing or gaskets for fixing glass, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking arrangement , screws, plugs, handle, lock, roller nylon ball bearingetc, complete complete all as specified NoteGlass and wire mesh shall be measured and paid separately under respectiveitems. 50 Refixing of shuttersof any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc, complete all as specified and as directed 51 S&F 100mm size SS Butt hinges extruded section, complete all as specified and as directed. 52 S&F Brass flush bolt, type 2 and fixed flush 100 mm long and fixed with screws, complete all as specified and as directed. 53 S&F Extruded aluminium alloy handels fabricated type, anodised, 100mm long complete all as specified and as directed. 54 S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws complete all as specified and as directed. 55 S&F Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200 mm long and fixed with screws. 56 S&F Extruded brass handles, fabricated type polished 200 mmlong complete all as specified and as directed. 57 S&F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed. 58 S&F (in repair) MS helical door spring 150 mm size incl roller and roller platefixed to wooden or steel frames with welding etc complete all as specified and directed. 59 S&F Floor door stopper of brass body and tongue with hard drawn steel spring fixed in floor, overall length cover plate 150mm complete all as specified and directed 60 S&F Double action floor springhydraulically regulated, made up of minimum 1.25mm thick aluminiun alloy sheet foundation box, main body with stainless steel cover ,governing piovet made of brass ,other parts made of mild steel heavy duty and fixed complete all as specified and as directed. 61 S&F Mortice lock, Brass, 4 Levers, vertical type, size 100 mm and fixed, complete all as specified and as directed. 62 S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed. 63 S&F 4.0 mm thick frosted/ pin headedglassin ventilatorshutters in square not exc 0.50 sqm in each pane complete all as specified and directed. 64 S&F 5.0 mm thick sheet glass ordinary quality (any tint) and glazing with oil puttyin square not exc 0.50 sqm in each pane complete all as specified and directed. 65 S&F soffio derocative drapery rod of25mm borehigh strength alloy rods in mirror Gold & Indian Bronze finish etc complete all as specified and directed 66 S&F soffio derocative finals and rings and bracket are metalic which are mettalized in golden shade etc complete all as specified and directed 67 Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation oards/slabs/ blankets, any thickness including cover fillets etc complete all as specified and as directed 68 M&L Gl frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 4 mm dia. G.I. (upto 1800mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and as directed. 69 S&F Solid PVC wall lining consisting of5mm thick wood grain printed PVC sheetinclusive of solvent cement and fixing at site on PVC frame as per manufacturer"s specifications and instructions complete all as specified and directed. 70 S&F Solid PVC fillets of width 35mm, made of5mm thick PVC sheet, for wall panelling inclusive offixing at site as in grid/frame on wall for fixing wall lining/ panelling as per manufacturer"s specifications and instructions complete all as specified and directed. 71 Supply and fix,as in repair, CP 40mmdia waste couplingwith inlet and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed. 72 Supply and fix,as in repair, 40 mm dia PVC 610 mm long waste pipe suitable for complete all as specified and directed. 73 S&F in repairs Stainless Steel Sink Mixer with Regular Swinging Spout (Wall Mounted Model) with Connecting Legs and Wall Flanges complete all as specified and directed. Make:Jaguar,Marc or equivalent, complete all as specified and as directed 74 M&L 19 mm thickprelame Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face, fixed with screws to timber frame work(Termite treated / water proof) as in cupboard, drawer, kitchen cabinet etc.) including taking down old one complete all as specified and as directed 75 M&L18-19mmBlock board, grade 1 quality, exterior grade, commercial type (Termite treated / water proof) as in cupboard, drawer, kitchen cabinet etc.) complete all as specified and as directed. 76 S&F Stainless steel zero crank hinges (auto) fancy typewith Mounting Plates & Cover Caps fixed to shutters in cupboards of standard size and shape for modular kitchen complete all as specified and as directed. 77 S&F Solid PVC particle board consisting of 18-20 mm thick prelaminated PVC sheet inclusive of solvent cement and fixing at site complete all as specified and as directed. 78 M & L for 1mm pvc decorative type laminate of surface finish, colour and pattern as approved, fixed with approved adhesiveas per manufacturer"s instructions, complete all as specified and as directed. 79 S&F Stainless steel zero crank hinges (auto) fancy type with Mounting Plates & Cover Caps fixed to shutters in cupboards of standard size and shape for modular kitchen complete all as specified and as directed. Make:Hettich or equivalent. 80 S&F 500 mm deep Black Finish Drawer Channel incl of rooler for moving drawer ,precision full extension runner with pull-out stop and roll-out guard,Powder-coated steel, Black complete all as specified and as directed.Make:Hettich or equivalent. 81 S&F Brass handles, cast type,polished bright fancy type,handles fixed with screw,of 125mm size complete all as specified and as directed. 82 S&F SS304 box type Cargo cutlery basket with width 436 mm, depth 500 mm and height 94mm fixed in kitchen cabinet complete all as specified and as directed. Make:Hettich or equivalent. 83 S&F CargoTech M Stainless Steel Wire Basket (Thali/Jar Basket) size 536 mm (W) x 500 mm (D) x 200 mm (H) ,Material:Chrome Plated Food Grade Stainless Steel fixed in kitchen cabinet complete all as specified and as directed.Make:Hettich or equivalent. 84 S&F CargoTech M Stainless Steel Wire Basket (Plain)size 436 mm (W) x 500 mm (D) x 150 mm (H),Material:Chrome Plated Food Grade Stainless Steel fixed in kitchen cabinetcomplete all as specified and as directed..Make:Hettich or equivalent. 85 S&F Stainless Steel, Chrome plated Bottle Pullout Carcase width 300 mm fixed both layers with acrylic plastic sheet makes it visually appealing and sturdyin kitchen cabinet complete all as specified and as directed..Make:Hettich or equivalent. 86 S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 500 Litre Capacity (Cylin -drical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe including Lowering of old/ unserviceable Water Storage Tank of any description, complete all as specified and as directed. 87 Supply and fix Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 88 S&F PTMT Ball Valve 25mm dia having mini -mum weight 455 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed, complete all as specified and as directed. 89 S&F Stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends 15mm bore dia for iron pipe or fro unions and fixed all as specified and as directed. 90 Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed. 91 Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed. 92 Taking up or down steel tubing of 25 mm bore and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed. 93 Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed. 94 Supply, lay and fix 25 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed. 95 Supplying and laying of 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or conceledincluding plain or brass fittings complete all as specified and as directed. 96 Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or conceled including plain or brass fittings complete all as specified and as directed. 97 Supplying and laying of 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or conceled including plain or brass fittings complete all as specified and as directed. 98 S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inletincluding fixing Bolts with and (excluding 10 litre capacity low levelFlushing Cistern)and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed. 99 Supply and fix, as in repair,vitreous china wash basin, counter top/ table topwhite, of size 580 x 450 mm, excluding taps, waste chain, plug and porcelain stopper including CP bottle trap complete all as specified and directed. 100 S&F 2 in 1 bib tap of 15mm bore cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 101 S&F in repairs fancy type angle cock 15mm bore, two way, chromium plated, fixed to GI or steel tubing incl fittings complete all as specified and directed. Make - JaguarModel NoALI-85053 Angular Stop Cock with Wall Flange Design and colour to be approvedby EIC. 102 Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 103 S&F in repair15mm bore dia brass choromium plated single lever 4-in-1wall mixerfor mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. 104 S&F Central hole for Hot and Cold water supply basin mixer, brass chromium plated screwed down for iron pipes,including necessary fittings etc as in repair , complete all as specified and as directed. 105 S&F in repairs stop cock/angle cock 15mm bore, chromium plated, fixed to GI or steel tubing incl fittings complete all as specified and directed. 106 S&F in repairs vertical shower drain chanel (24 x 5 inch) with cockroch trapSS-304 complete all as specified and as directed. 107 S&F in repairsStainless steel grating of 100mm dia complete all as specified and as directed. 108 Supply and fix, as in repair, Overhead Shower with arm200 x 200mmsquar Shape Single Flow (Brass Chromium Plated) with Rubit Cleaning System, including fixing to steel pipe or union of 15mm bore complete all as specified and as directed. 109 Supply and fix, as in repairs, Hand Shower (Health Faucet) (Brass chromium plated)with 1 Meter Long Easy Flex Tube inChrome Finish & Wall Hook complete all as specified and as directed. 110 Supply and fix as in repair, 800 mm x counter length bevelled edge mirror of selected quality glass, with chromium plated brass screw and Stainless Steel Mirror Screw Cap complete all as specified and as directed. 111 S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws, complete all as specified and as directed. 112 S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. 113 Supply and fix, as in repairs, tempered glass corner shelf and wall mounted storage accessories with fitted brackets(10x10 inch) complete all as specified and as directed. 114 S&F in repairbrass choromium platedtowel rail 600 mm long complete all as specified and directed. 115 S&F in repairbrass choromium platedtowel rack with hanger long complete all as specified and directed. 116 S&F in repair brass chromium plated Towel Ringround /square 150mm dia fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. 117 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed. 118 Supply and fix, eaves gutters and rainwater 150mm half dia PVC (SWR)fixed to iron clamps etc complete all as specified and as directed. 119 Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls complete all as specified and as directed. 120 S&F PVC (SWR) 110mm dia bends any radius with access door complete all as specified and as directed. 121 S&F PVC (SWR) branch 110mm bore pieces, single ( single Y ) equal or unequal with access door complete all as specified and as directed. 122 S&F PVC (SWR) junction110mm bore single ( single t) equal or unequal with access door complete all as specified and as directed. 123 Supply and fix, PVC cowls 110 mm bore complete all as specified and as directed. 124 Supply and fix,as in repairs, 75 mm dia of outlet PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. 125 Supply and fix, in repairs 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls with access door complete all as specified and as directed. 126 S&F PVC (SWR) 75 mm dia bends any radius with access door complete all as specified and as directed. 127 S&F PVC (SWR) junction75 mm bore single ( singleT) equal or unequal with access door complete all as specified and as directed. 128 S & F for 100 mm bore of pipe stack clamp out of 50mm x 5 mmflat iron and 16 mm dia round iron stay including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed. 129 S & F for 75 mm bore of pipe stack clamp out of 50mm x 5 mmflat iron and 16 mm dia round iron stay including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed. 130 S & F in repair 40mm (HDPE) of pressure rating 6 Kg/f/CM2 fixed complete to walls ceilings or in floors etc, complete all as specified and as directed. 131 Supply and fix,as in repair, CP 40mmdia waste couplingwith inlet and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed. 132 Supply and fix,as in repair, 40 mm dia PVC 610 mm long waste pipe suitable for complete all as specified and directed. 133 Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed. 134 Supply and fix,as in repair, 32 mm dia PTMT 610 mm long waste pipe suitable for WHBcomplete all as specified and directed. 135 Supply and fix, as in repair, sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. 136 S&F in repairs Stainless Steel Sink Mixer with Regular Swinging Spout (Wall Mounted Model) with Connecting Legs and Wall Flanges complete all as specified and directed. Make:Jaguar,Marc or equivalent. 137 Supply and fix, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. 138 Taking down any layer of existing water proofingtreatment including plaster , PCC of any thickness, complete all as specified and as directed. 139 M & L for 15 mm thick screeding / rendering in cement mortar 1:3 on concrete roof surface, using Water Proofing Compound @ 3% by weight of cement, surface finished even and smooth without using extra cement all as directed.Note: Water Proofing Compound shall be measured and paid separately.Complete all as specified and as directed. 140 M & L for cleaning the plastered /concrete surface with wire brush and applying water proofing treatment as under:-(a)Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces(b)LayingAPP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thickreinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surfaceby forced application complete all as specified. (c) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction.(d) Finally applying a coat of solar reflective bituminious aluminium paint @0.15 Kg/Sqm over the membrane. 141 M&LApplying two coats of Oil bound distemper to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wallall as specefied and directed. 142 M&L Preparing old decorated Plaster Surfaces of Wall and applying One Coat of oil bound distemper (any colour /tint) complete all as specified and as directed. 143 M&L Preparation of newely plaster surfaces andappplying two coats of weather coat by smart painting methodover one primer coats of damp shield over two coat of wall care putty tonew plastered walls as per manufacturer complete all as specified and directed. 144 Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces, complete all as specified and as directed.. 145 M&LApplying two coats of Plastic emulsion paint by smart painting method to newly plastered wall over a coat of primer over two coat of wall care puttyincluding preparation of newly platsered wallcomplete all as specified and as directed. 146 M&L Complete removal of existing treatment to old surface wallsand appplying two coats of weather coat paint by smart painting method over one primer coats of damp proof coat over two coat of wall care putty as per manufacturer instrcution including properly fillings the cracks full height of bldg complete all as specified and directed. 147 M&L Prepration of new wooden surface over 10 cm width or girth and applying two coat of Varnishing over a Thin varnish or lacquer or shellac varnish, complete all as specified and as directed. 148 M&L preparation of old painted steel surfaces over 10cm width or girthand applying one coatof synthetic enamel paint, complete all as specified and as directed. 149 M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed. 150 M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 151 Removing excavated material / Debries obtained from demolition/takin down to a distance not exc 50.00 mtr and depositng where directed etc complete all as specified and as directed 152 Removing excavated material / Debries obtained from demolition/takin down to a distance exc. 250 m but n exc. 500 m and depositing where directed and depositng where directed etc complete all as specified and as directed 153 Removing excavated material / Debries obtained from demolition/takin down to a distance exc.500 m and upto total distance of 1.5 km and depositing where directed and depositng where directed etc complete all as specified and as directed 154 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.including cutting chases of exsisting wall for wall taking out concealed conduit ec. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-below complete all as specified and as directed. 155 Taking down main switches and DBs of any type and make including wooden board / junction box, complete all as specified and as directed. 156 M&L for concealed point wiring for one Light/ Fan/ Bell point complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20 mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, with and including modular metal flush box and Modular white Cover Plate with Frame for fixing modular switches, sockets fan regulators etc duly earthed.Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles complete all as specified and as directed.Note- (i)The cost of Blanking plate if required shall deemed to be included in the unit price. (ii) Red coloured cable shall be used for live connection,black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.(iii) cutting chases on walls / ceilingand making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate. 157 All as per item No.156 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and as directed. 158 All as per item No.156here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and as directed. 159 All as per item No. 156 here - in - before but for 5 Amps socket point on the same board controlled by one switch, complete all as specified and as directed. 160 S&F Modular switch flush type, 6 Amp, one way ,1 module complete all as specified and as directed. 161 S&F Modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and as directed. 162 S&F Modularswitch, 16 Amp flush type 1 module complete all as specified and as directed. 163 S&F Modularsocket outlet, 3 pin, 6/16 Amp flush type 2 module complete all as specified and as directed. 164 S&F in Modularbell push, flush type, 5 Amp,1 module complete all as specified and as directed. 165 S&F ModularFan Regulator stepped type 2 module ,120Wcomplete all as specified and as directed. 166 S&F Call bell Dingdong type AC 230 Volts single pole, complete all as specified and as directed.. 167 S&FCeiling rose surface backelitethree terminals, complete all as specified and as directed. 168 Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten polycarbonate houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection, complete all as specified and as directed. 169 Supply and fix LED tube light fitting of 9 W with tube (2 Ft) 240 V Wall mounted LED batten polycarbonate houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection, complete all as specified and as directed. 170 S&F Decorative wall light fixture made out of polycarbonate, suitable with 5 watt LED Bulb complete all as specified and directed. 171 Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Tripplepole and neutral (TPN) 415 Volt , double door, suitable for 4 way with dim rail earth and neutral bar all complete all as specified and as directed. 172 Supply and fix for Recess mounting high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed "T" section including 36 watt LED CDL light, complete all as specified and as directed. 173 Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, not more than 28 Watt, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including provision of fan hook complete all as specified and as directed. 174 S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 12 way with common bus bar at incomming end complete all as specified and directed 175 S & F MCB "C" series Single pole and nutral 40-63 Amps, breaking capacity 10KA,complete all as specified and directed 176 S & F MCB "C" series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed 177 S&F metal clad socket out let with MCB single pole and nutral 20-32 Amp, 240 V including sheet metal enclosure complete fixed on board including complete electrical connection by proper size of copper lugs complete all as specified. 178 M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 6.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 6.0 Sqmm as earth lead drawninto rigid non metalic PVC conduit of size 20 mm dia including all fittingscomplete all as specified and as directed.Note:- Two runsof 6 Sqmm conductor as main wireand one run of 6 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit. 179 M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 4.0 Sqmm as earth lead drawninto rigid non metalic PVC conduit of size 20 mm dia including all fittingscomplete all as specified and as directed.Note:- Two runsof 4 Sqmm conductor as main wireand one run of 4 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit. 180 S & F 45 W LED outdoor New generation, Circular LED post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminum landscape luminaries with high power LEDs as light source with IP 65/66 , IK-07 protection complete all as specified and directed.Make-Havells, Cat No-RINKPT45WLED757PSYMTOPC / Phillips/Crompton/Wipro 181 Supply and fixingwall mounting hi-flow and heavy duty fan with all accessories of Size 400 mm sweep, 230 volt Acwith connection from existing celing rosecomplete all as specified and as directed. 182 S&F Exhaust Fans AC single phase 230 V of size 250 mm sweep with louvre 1400 RPM including connecting up with 3 core multi-stranded copper conductor cable of size 23/0.193 from Ceiling Rose to Exhaust Fan, complete complete all as specified and as directed. 183 Supply and fix Chimney Faber 90 cm, 1500 cum/hr Auto- Clean curved glass kitchen Chimney including necessary fitting and cutting/hole in roof/wall suitable size complete all as specified and directed. 184 Supply & Fix electric storage heater of 25 Ltr capacity, 5 star in replacement with heatingelement 2000W, thermostat, inlet, outlet connection pipe and air vent connections including all fixing arrangement for mounting on wall and necessary water inlet and outlet connections complete all as specified and as directed. 185 Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 25 Sqmm 3.5 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge. 186 Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 10 Sqmm 2 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge. 187 Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and all as directed. 188 M&L for 80 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed. 189 M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated ( punned) upto 180mm thickness, complete all as specified and as directed. Note : punned thickness will only be measured for payment purpose. 190 Supply and laying of well burnt bricks, sub class "B" laid flat in trenches for protection of cable complete all as specified and directed. 191 Returning and filling including spreading, levelling, watering and well rammingin layers not exceeding 25 Cm thick complete all as specified and directed. 192 Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directedat a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed. 193 M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire 4mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed. 194

Contact Information