|
Repairs To B R Works In Mes Installation At Lrde Cair And Mes Complex Under Age B R I Of Ge I R And D West Bengaluru=1.00 "Demolition of brick work or stone/ boulder masonry, PCC block masonry built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100metre and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100metre, complete all as specified and directed. " 2.00 "Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness ( below or above ground level ) and disposing of debries outside MD land, complete all as specified and directed. " 3.00 "Demolition of PCC (unreinforced) of any description & in any position not otherwise specifically provided, complete all as specified and directed. " 4.00 "Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100metre and disposal of unserviceable materials, debris and rubbish to outside MD land, complete all as specified and directed. " 5.00 "Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris to a distance exc 1 kilometre out side MD land, complete all as specified and directed. " 6.00 "Taking down chowkat or frames with shutters (with out taking off syhutters from the frame) n. exc 1.50 sqm each and removing from site, complete all as specified and directed. " 7.00 "Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each and removing to and from store etc, complete all as specified and directed. " 8.00 "Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. " 9.00 "Dismantling structural steel work including doors, gates but excluding framed truss etc.,complete all as specified and directed. " 10.00 "Dismantling of fencing wire mesh, any type, complete all as specified and directed. " 11.00 "Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed. " 12.00 "Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. " 13.00 "Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar and removal of debris outside MD land etc., complete all as specified and directed. " 14.00 "Dismantling plain corrugated steel sheeting any gauage thick ness including Nainital and similar pattern, complete all as specifed and directed. " 15.00 "M&Lfor Precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. " 16.00 "M&L for PCC 1:4:8 type D-2 (Using 40 mm graded stone aggregates)as in foundation filling and mass concrete,sub base etc, complete all as specifed and directed. " 17.00 M&L for 100mm thick PCC 1:2:4 type B1(using 20mm graded stone aggregate) as in flooring/ hardstanding etc finished surfaces even and smooth without using extra cement etc, complete all as specified and directed. 18.00 "M&L for providing 75 mm thick cement concrete in 1:3:6 type C-1,(using 20 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection, complete all as specified and directed. " 19.00 "M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) of 25 mm thick as in leveling course ,finished surfaces even and rough to receive floor finish, complete all as specifed and directed. " 20.00 "M&L for Non - Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in CM(1:4), complete all as specified and directed. " 21.00 "M&L for Non Skid coloured ceramic coloured tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM(1:4), complete all as specified and directed. " 22.00 "M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm/ 450 x 350 x 7mm to 8mm in vertical surface as in dado set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with colour of tiles over and including 10 mm thick rendering in cement motor 1:4, complete all as specified and directed. " 23.00 "M&L for glazed ceramic coloured tiles vertical surface of size 200 x 300 x 7mm thick set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with colour of tiles over and including 10 mm thick rendering in cement motor 1:4, complete all as specified and directed. " 24.00 "M&L for 18-20mm thick granite slab on steps, jambs, pillars, window-cills, cooking platforms including cutting polishing rounding on edge etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick screed bed in CM 1:4. including grinding and polishing, complete all as specified and directed. " 25.00 M&L for rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment including 15mm thick Screed bed or bedding layer of cement mortar 1:4 for laying floor finishes, complete all as specified and directed. 26.00 "M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finish the surface even and smooth including mixing of WPC, complete all as specified and as directed. Note: WPC shall be measured and paid seperately " 27.00 M&L for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work etc., complete all as specified and directed. 28.00 "M&L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed. " 29.00 "M&L for Rendering 5mm thick in CM 1:3 in ceiling on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed. " 30.00 "Supplying only liquid water proofing compound, complete all as specified and directed. " 31.00 "M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer including necessary scaffholding, complete all as specified and directed. " 32.00 "M&L for 1mm thick wall care putty on wall, complete all as specified and directed. " 33.00 "M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant primer including necessary scaffholding complete all as specified and directed. " 34.00 "M&L for preparation of old plastered surfaces of wall and applying one coat of oil bound distemper on wall including necessary scaffholding complete all as specified and directed. " 35.00 "M&L for preparation of old surfaces and applying one coat of cement based paint on wall including necessary scaffolding complete all as specified and directed. " 36.00 "M&L for preparation of new plastered surfaces of ceiling and applying three coats of White wash in including necessary scaffholding complete all as specified and directed. " 37.00 "M&L for preparation of old plastered surfaces of ceiling and applying two coats of White wash including necessary scaffholding complete all as specified and directed. " 38.00 M&L for preparation of old surface of any description over 10 cm width or grith not otherwise described and applying two coats of Chlorinated rubber paint over a coat of chlorinated high build MIO paint using cradle system at high towers adhering all safety measures complete as specified and directed. 39.00 "M&L for preparation of old surface of any description over 10 cm width or grith not otherwise described and applying two coats of Chlorinated rubber paint over a coat of chlorinated high build MIO paint adhering all safety measures complete as specified and directed. NOTE:- Quoted rates shall deemed to be inclusive of the cost of scaffholding required for painting. " 40.00 "S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. " 41.00 "S&F for Solid PVC door frame of size 50X47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suupplying & fixing in opening complete all as specified and directed . " 42.00 "S&F for factory made solid PVC door shutter 30mm thick (style) considering of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck in side with solvent cement for stiles and plain colour PVC sheets for top rails and bottom rail on side and on gap insert for top rail and bottom rail panelling of plain colour PVC shutter to be fitted in MS frame welded/sealed to the stile, rails with suitable PVC sheet beading and jointed to gether with solvent cement complete all as specified and directed. " 43.00 "S&F for mild steel butt hinges medium weight of size 100 mm complete all as specified and directed. " 44.00 "S&F for Aluminium anodised barrel tower bolts of extruded section, 150 mm long all specified and directed. " 45.00 "S&F for Aluminium anodised cast type handles 150mm long all as specified and directed. " 46.00 "S&F for aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and directed. " 47.00 "S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and directed. " 48.00 "S&F Mild steel plates, Fe 410-W (Gde-E-250) quality plain or chequered, 5mm thick or over in thickness in available sizes etc complete all as specified and directed. " 49.00 "S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to Fe 410 -W (Gde- E- 250) quality- A-complete all as specified and directed. " 50.00 "S&F for Steel work in tubular trusses,frame work,grills etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc complete all as specified and directed. " 51.00 S&F for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed. 52.00 "Supply only Chain link MS galvanised fencing any size or type (The max. size of mesh does not exc 100mm x 100mm and dia of wire n.exc 3.15mm.) complete all as specified and directed. " 53.00 "Fixing only Chain link fencing including line wires,any mesh, size and type to any standards,rails straining bolts, etc. including provision of binding wire complete all as specified and directed. " 54.00 "S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. " 55.00 "M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 etc complete all as specified and directed. Note : Reinforcement shall be measured and paid separately. " 56.00 "M&L for Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality etc complete all as specified and directed. " 57.00 "S&F for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed. " 58.00 "S&F for 1.25mm thick Rolling shutterSteel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed. " 59.00 "M&L for preparation of new steel surface of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer. " 60.00 "M&L for preparation of old steel surface of any description, over 10cm in width or girth not otherwise described and applying one coats of synthetic enamel paint . " 61.00 "M&L for Preparation of new wooden surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed. " 62.00 "M&L for preparation of old painted wood Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary paint) complete all as specified and directed. " 63.00 "S&F for powder coated aluminium frame and shutters for doors, windows ventilators and partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. " 64.00 "M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work in cup board shutters / aluminium partions etc..complete all as specified and directed. " 65.00 "S&F for 4.8 mm thick sheet glass ordinary quality fixed in aluminium framenot exc 0.50 Sqm each in each pane complete all as specified and directed. " 66.00 "Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane etc complete all as specified and directed. " 67.00 S&F in repairs for 15 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. 68.00 S&F in repairs for 20 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. 69.00 "S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and directed. " 70.00 "S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white complete all as specified and directed. " 71.00 S&F in repairs Vitreous China squatting pan of orissa pattern size 580mm 440 mm white with `P' or `S' trap, front or back inlet & integrated foot rests, including provision of cement concrete bedding complete all as specified and directed. 72.00 "S&F in repairs Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe & waste pipe) etc complete all as specified and directed. " 73.00 "S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets complete all as specified and directed. " 74.00 "S&F in repair plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated plated or aluminium hinging device complete all as specifed and directed. " 75.00 "S&F in repairs CP Bib taps fancy type 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed. " 76.00 S&F in repair Stop valves/Angle cock 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. 77.00 "S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe etc complete all as specified and directed. " 78.00 "S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. " 79.00 "S&F for 15 mm bore Urinal spreader , cast copper alloy with crtuch screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. " 80.00 "S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood & fixed to wooden plugs with CP brass screws & cup washers complete all as specified and directed. " 81.00 "S&F for 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and directed. " 82.00 "S&F for rotational moulded polyethylene water storage tanks ( cylindrical, vertical with closed top ) hoisted and fixed in position of 500 Ltrs capacity including taking down old one including 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight 210 gms) complete all as specified and directed. " 83.00 "S&F for rotational moulded polyethylene water storage tanks ( cylindrical, vertical with closed top ) hoisted and fixed in position of 1000 Ltrs capacity including taking down old one including 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight 210 gms) complete all as specified and directed. " 84.00 "S&F for 75 mm dia bore uPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and directed. " 85.00 "S&F for 110 mm dia bore uPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and directed. " 86.00 "S&F for uPVC (SWR) bends any radius 75 mm dia of bore,all as specified and directed. " 87.00 "S&F for uPVC (SWR) bends any radius 110 mm dia of bore, all as specified and directed. " 88.00 "S&F for 75mm dia outlet PVC multi floor trap with grating including dismantling the damaged trap all as specified and directed. " 89.00 "Cutting of tree branches of girth not less 10 cm falling over the building roof top upto a height of 15m from ground floor and cleaning the roof surface viz., leaves, tree branches etc incl removing of branches, leaves out of MD land all as specified and as directed by Engr-in-charge. " 90.00 "Cleaning of foliage on accessible / non accessible upto six storeyed roof top, mud cakes, rain water pipe outlets to ensure to pass the water through RWP with out any stagnation, etc including proper arrangement of ladder, scaffolding if required and cleaning with water and removal of debris out of MD land complete all as specified and directed by Engr-in-charge. " 91.00 "Supply only aggregate of broken stone boulders for loose filling of gauge 40mm to 80mm etc, complete all as specified and directed. "
|
