|
Rubber Cone, For Signage, Size 75 Cm, Orange Color. It Has Two Smooth Reflective Strips In Yellow (Two 100 Mm Strips), With A Retroreflectance Of 250 Candelas, Electronically Welded To The Cone. The Strips Are Made Without Prismatic Pvc With A Thickness Of 0.25 Mm And With A Pvc Lining With A Thickness Of 0.20 Mm, Weight Of 2.375 G, With A Base Of 37 Cm With A Minimum Level Of Reflectivity For Use In Areas Of Low Visibility In Accordance With The Current Nbr. It Must Be Flexible, Malleable And Unbreakable, Resistant To Heat And Weather Conditions., Orange Color With 2 White Reflectors Of Approximately 10 Cm Each, Zebraized Signaling Tape, In A Roll Of 200 M, With Strips Inclined At 45°, In Orange And White Colors, As Established By The Contran.., Plastic Mass, For Fixing Tacks, Tacks Caps, 1Kg Packaging, 29/12/2025 - 19:34:25, 29/12/2025 - 19:34:36, 29/12/2025 - 19:36:33, 30/12/2025 - 19:35:14, Warning Sign Traffic In Square Shape, Composed Of Sheet Metal And Sticker.., Traffic Regulation Signage Plate In Circular Shape, Traffic Regulation Signage Plate In Octagonal Shape, Square Plate, Measuring 0.50Mx0.50M, Made Of Steel Sheet No. 16, With Rounded Corners. One Of The Sides Painted In Matte Black And The Other Side Painted In Yellow..., Round Plate, 60M In Diameter, Made Of Steel Sheet No. One Of The Sides Painted In Matte Black And The Other Side Painted In White.., Hot-Dip Galvanized Pipe Post As Per Nbr 6323, In Iron, 2 Inches In Diameter X 3.00M In Length, With A Wall Of 2.25Mm Thick. At One End There Must Be 02 (Two) Cuts Perpendicular To Each Other (In The Shape Of A Cross On The Pipe), 10 Cm Long And Without Burrs, At The Other End There Must Be A First Hole With A Thickness Of 8.5 Mm, 5 Cm Away From The End Of The Pipe, At An Angle Of 90° Without Burrs, The Second Hole With A Thickness Of 8.5Mm Will Be 53Cm Away From The First Hole. The Second Hole Is Parallel To The First And Perpendicular To The Pipe, At An Angle Of 90° Degrees And Without Burrs.., For Signs With Public Road Names, 25 Mm Thick. At The Lower End (Base), It Must Have: Two Cuts Perpendicular To Each Other (In The Shape Of A Cross On The Barrel), 10Cm Long And Without Burrs. At The Upper End, There Must Be: Welding Along The Barrel, From The Beginning Of The Top Towards The Base, Two Angle Irons 2 Inches Wide; 1/4 Inch Thick And 25Cm Long, Forming A 90º Angle Between Each Other. Two 9Mm Holes In Each Angle Iron, Each Hole Being 5Cm From Each End And 2Cm From The External Width Of The Angle Iron. With The Upper End Closed To Prevent Rainwater From Entering., Square Tack, Made Of Polyester Resin, With One Anchor Screw, Monodirectional (One Reflective) 95Mm Bi-Directional (2 Yellow Reflectors) With Dimensions 250 Mm Long
|
