Bids Are Invited For Opening Of The Bidding Process For The Acquisition Of A Simple Stretch Car For The Surg ... in Brazil

Work Detail

Simple Stretcher Car - Equipment Intended For The Transport And Accommodation Of Patients, From The Entrance Door Of The Operating Room To The Operating Room, As Well As For Eventual Intersectoral Movements Of Patients. The Stretcher Car Must Be Made Of High-Resistance Tubular Carbon Steel, With Anti-Corrosion Treatment And Electrostatic Powder Painting In White Or Similar. The Structure Must Be Reinforced, Designed To Support A Minimum Load Of Up To 250 Kg Distributed, And Have Uniform Welds, Without Burrs, Sharp Edges Or Irregularities. Sanitation. Dimensions Must Be Approximately 1.90 M (Length) X 0.60 M (Width) X 0.80 M (Total Height), Allowing For Variation Of Up To 10% In Each Measurement. The Corners Must Be Rounded, And The Surfaces Must Be Smooth And Free From Crevices, In Order To Avoid The Accumulation Of Dirt. It Must Have An Anatomical, Waterproof Mattress, Covered In Hospital Cowhide Or Washable Pvc, Resistant To The Action Of Sanitizing Products. The Internal Foam Must Have A Minimum Density Of D28 And A Thickness Of 50 Mm (5 Cm). The Set Must Have Four (04) Swivel Castors With A Minimum Diameter Of 5” (125 Mm), Two (02) With Diagonal Locks. The Wheels Must Have A Soft Rubber Bandage, Which Does Not Mark The Floor, And A Silent Bearing System, Providing Smooth And Stable Movement. The Side Rails Must Be Foldable Or Retractable, Made Of Chromed Or Painted Tubular Steel, With A Safety Locking System, And A Minimum Height Of 250 Mm Above The Mattress Level, Allowing Variations Of Up To 10% In This Measurement. Adjustable, With A Manual Adjustment System (Rack Or Ratchet Type) That Allows The Back To Be Raised Up To 60°, With A Resistant Mechanism That Is Easy To Operate By The Operator

Contact Information