|
Unif Kit. Esc. 01 (Inf.) To Exg To Serve Early Childhood Education And Elementary School Students I.- 01 Jacket 01 (Inf.) To Exg? Made Of Helanca 65% Polyester 35% Cotton With Tolerance 3 Percentage Points, Weight 285G/M² Tolerance 5%, Color Navy Blue Pantone 19-3921 Tpx. Each Sleeve Must Contain An Overlapping Strip Of 10Mm In Half Mesh 65% Polyester 35% Viscose Tolerance 3 Percentage Points, Weight 170G/M² Tolerance 5%, Color Pantone Sky Blue 16-4427 Tpx, Applied Using A Ratchet Machine. On Each Side, It Must Contain A Curved Pocket Made Of The Same Mesh And The Same Color As The Main Stitching, And Must Also Be Stitched On A Straight Machine With A Needle With Approximately 5Mm Stitching. The Cuffs And Bars Must Be Made Of 2X2 Rib, Composition 93% Polyester 7% Elastane Tolerance 3 Percentage Points, Weight 310G/M² Tolerance 5%, Color Navy Blue Pantone 19-3921 Tpx. The Hood Must Be In The Same Helanka And The Same Color As The Main Knit. It Must Also Contain A Half Mesh Lining 65% Polyester 35% Viscose Tolerance 3 Percentage Points, Color Sky Blue Pantone 16-4427 Tpx. The Hood Must Be Folded On A Covering Machine With Two Wide Gauge Needles With 20 Mm Finished. On The Front Of The Left Side Of Whoever Wears It At Chest Height, The Coat Of Arms Of The Municipality Must Be Printed With Its Appropriate Colors, Approximately 75 Mm In Height And Proportional Length, And Just Below The Coat Of Arms, The Word “Education” Must Be Printed. In The Same Length As The Coat Of Arms, Using Arial Typographic Set In Sky Blue. A Thick 100% Polyester Cord In Pantone 16-4427 Tpx Must Be Applied To The Hood, And Must Be Approximately 15 Cm Out, As Shown In The Illustrative Image, And The Ends Must Be Tied Into A Knot. At The Top Of The Back, Centered, The Words “Prefeitura Municipal De Jardim Alegre” Must Be Stamped. Pr? Using The Arial Typographic Set In Sky Blue, Approximately 23Cm Long And Proposed Height, Shorts 01 (Inf.) Exg Made In Helanca 65% Polyester 35% Cotton With Tolerance 3 Percentage Points, Navy Blue Color Pantone 19-3921 Tpx. On Each Side It Must Contain An Overlapping Strip Of 10Mm In Half Mesh 65% Polyester 35% Viscose Tolerance 3 Percentage Points, It Must Also Be Stitched On A Straight Machine With A Needle With Approximately 5Mm Stitching. 40Mm Elastic Should Be Applied To The Entire Circumference Of The Waist Using An Overlock Machine And Folded Using A Ratchet Machine With 4 Chain Stitch Needles. The Bar Must Be Made Using A Two-Needle Wide-Gauge 20 Mm Finishing Machine, With An Overlock Finish. Internal Seams Must Be Made On An Overlock Machine Using 100% Polyester Thread No. 120, In The Color Helanca. On The Inside, In The Center Of The Rear Hook, A Synthetic Label Must Be Applied In White Containing Cnpj, Company Name, Washing Instructions, Year Of Manufacture, Origin And Composition. The Pieces Must Be Individually Packaged In Plastic Bags Identified With Size And Item, And Must Then Be Stored In A Cardboard Box Resistant To Transportation And Storage. A Sample In Any Size Must Be Submitted Within 10 Calendar Days. Along With The Samples, The Reports Requested In The Tables Must Be Presented. The Reports Must Be Issued By Textile Laboratories Accredited By Inmetro.
|
