|
Lot 1 - Construction Site Administration, Lot 1 - Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, Lot 1 - Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placing Formwork). Af_01/2024, Lot 1 - Preparation Of The Bottom Of A Trench With A Width Of Less Than 1.5 M (Adjustment Of The Natural Soil). Af_08/2020, Lot 1 - Slim Concrete Ballast, Applied To Crowning Blocks Or Footings, 5 Cm Thick. Af_01/2024, Lot 1 - Manufacture, Assembly And Disassembly Of Shoe Formwork, Made Of Resin Plywood Sheet, E=17 Mm, 4 Uses. Af_01/2024, Lot 1 - Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, Baldrame Beam And Running Shoe Using 6.3 Mm Ca-50 Steel - Assembly. Af_01/2024, Baldrame Beam And Running Shoe Using 5 Mm Ca-60 Steel - Assembly. Af_01/2024, Lot 1 - Concreting Shoe, Fck 20 Mpa, Using Jerica - Laying, Densifying And Finishing., Lot 1 - Manual Trench Backfilling, With Percussion Soil Compactor. Af_08/2023, Lot 1 - Manual Excavation For Baldrame Beam Or Running Footing (Including Excavation For Placing Formwork). Af_01/2024, Assembly And Disassembly Of Formwork For Baldrame Beam, In Sawn Wood, E=25 Mm, Baldrame Beam And Running Shoe Using 8 Mm Ca-50 Steel - Assembly. Af_01/2024, Lot 1 - Concreting Of Crowning Block Or Baldrame Beam, Lot 1 - Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, Lot 1 - Chapisco Applied To Masonry And Internal Concrete Structures, Using A Trowel. Mortar Trace 1:3 With Manual Preparation. Af_10/2022, Lot 1 - Surface Waterproofing With Cement Mortar And Sand, With Waterproofing Additive, E = 1.5Cm. Af_09/2023, Lot 1 - Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Straight Foot, 8 Uses. Af_09/2020, Lot 1 - Assembly And Disassembly Of Beam Formwork, Without Propping, In Resin Wood Sheet, 8 Uses., Propping With Wooden Fork, Lot 1 - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, Lot 1 - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, Lot 1 - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Steel Ca50 Of 8, Lot 1 - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Steel Ca-50 Of 10, Lot 1 - Unidirectional Precast Slab, Bi-Supported, For Flooring, Ceramic Filling, Conventional Joist, Total Slab Height Lt = 12 Cm (Filling+Cover) = (8+4). Af_08/2025, Lot 1 - Concreting Of Pillars, Fck = 20 Mpa, Using Buckets - Launch, Lot 1 - Concreting Of Beams And Slabs, Fck=20 Mpa, For Any Type Of Slab With Buckets In Single-Story Buildings - Launch, Lot 1 - Masonry For Sealing Ceramic Blocks Drilled Horizontally At 11, 5X19x29 Cm (Thickness 11.5 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, Lot 1 - In-Situ Molded Concrete Girder, Thickness *10* Cm. Af_03/2024, Lot 1 - Framed In-Situ Concrete Console, Lot 1 - Opening Aluminum Door With Paneling, With Trim, Fastening With Screws - Supply And Installation. Af_12/2019, Lot 1 - Sliding Aluminum Window With 2 Glazing Leaves (Glass
|