|
Tender For term contract For 339 Asc Timarpur Area Of Age Br Ii Under Ge North Delhi Cantt 10-1. S&F in repairs Kitchen sink mixer 15mm dia CP brass fancy type including joints to steel pipe or unions all as specified. Make:- Jaquar Cat Part No ARI39309 or equivalent as approved by GE 2. S&F in repairs 15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. Make:- Jaquar Cat Part No FLR5281N/ CERA Cat Part No F2008401/Hardware Cat Part No F570022 3. S&F in repairs stainless steel curtain rod 25mm dia including brackets, fixing decorative/fancy stops/nobs/lattu etc complete all as specified and directed. 4. S&F in repair angular stop cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified. 5. S & F CP hand spray health faucet with 1.5m long easy flex tube in chrome finish and wall hook complete all as specified. MAKE : Jaquar Cat Pt No ALD-CHR-583/Hindware/CERA or equivalent as approved by GE 6. S&F stainless steel basket (plain) of size 50cm x 37cm x 10cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 11/25 inch length two way extruded MS galvanised over rollers of approved Make 7. S&F stainless steel thali basket (11-13 division) of size 50cm x 37cm x 20cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 18/25 inch length two way extruded mild steel galvanised over rollers of approved Make 8 S&F stainless steel plate basket (11-13 division) of size 50cm x 37cm x 16cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 18//25 inch length two way extruded mild steel galvanised over rollers of approved make. 9 S&F stainless steel partition basket of size 50cm x 37cm x 16cm made of 4mm thick stainless steel. wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extrude MS galvanised over rollers of approved make. 10 S&F stainless steel cutlary basket of size 50cm x 37cm x 10cm made of 4mm thick stainless steel. wire and bottom of stainless steel perforated sheet approved quality with suitable arrangement for fixing telescope basket (Channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make. 11 S&F stainless steel basket (plain) of size 50cm x 37cm x 16cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make. 12 S&F stainless steel bottol full out of size 50cm x 40cm x 16 cm in two tier made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make. 13 S&F telescope basket/drawar (channel) 18/25 inch length extruded MS galvanised over rollers of approved make 14 M&L for complete removal of existing treatment and preparing surfaces plastered or unplastered surface and applying two coats of plastic emulsion paint over a coat of wall care putty complete all as specified and directed. Note:- Plastic emulsion paint shall be done with roller of required size instead of brush 15 S&F factory made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers ( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. 16 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter molded of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, all as per direction of Engineer-In-Charge. 17 S&F FRP (Fiberglass reinforced plastics) chajja 4mm thick of fibreways or equivalent in required colour size and design made by resin transfer moulding (RTM) machine technology having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 Nos vertically and 1 Nos horizontally 50 x 2 mm thick mild steel flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically including all necessary fittings. The FRP Chajja should be manufactured using unsaturated polyster resin as per IS:6746 duly reinforced with fiberglass chopped strand mat (CSM) as per IS:11551 complete with protective gelcat ultravoulet coating on top for complete resistance fromm the extreme of temperature, weather & sunlight. (Note - All the gaps are sealed using silicon sealant from tip and bottom to make it water proof including grouting in existing wall and fitting with suitable screws and fixtures upto 3rd floor level incl all labour material tools and plants, scaffolding safety arrangements quality checks complete in all respect all as specified and directed. 18 S&F Aluminium window as per TD drg No. CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mmx65mm. (iii) Welded shutter (02 Nos) of size 40mm x 60mm x 1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar. (v) Welded wire mesh shutter (2 Nos) of size 40mm x 18mm x 1.3mm thickness 45 degree cut with 0.45mm nominal dia of stainless steel wire mesh, stainless steel 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyester coat of any shade as approved by GE. (vii) Window shall have provision for installation of window AC/Desert Cooler and provision of window glass shutter, wire mesh, grill and necessary fittings and locking arrangements for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-charge. (viii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge. 19 S&F stainleless steel handle heavy duty of 150mm fancy type for shutter etc. complete all as specified and directed. 20 S&F stainleless steel butt hinge heavy duty of 100 to 125mm fancy type for shutter etc. complete all as specified and directed. 21 S&F stainleless steel sliding bolt heavy duty of 300mm long fancy type shutter etc. complete all as specified and directed. 22 S&F in repairs soft close heavy duty steel nickel plated telescopic drawer channel size 500mm ( width required 12.8mm available channel hight 45mm) including fixing arrangement to drawer/ baskets etc complete all as specified and directed. 23 S&F in repiars white composite pattern vitreous china wash down water closet pan with P trap or S trap (pedestal pattern, model "Gemma/Rosehip" of any colour, twin flush system including soft close seat cover all as specified and directed. Cat Part No. for S trap- GS/WC/1013 and for P trap GS/WC/1008 or Hind Ware Cat Part No 92072 model Cedar. 24 M&L 15mm thick ready mix plaster (Make:- Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall internal or external surfaces finished even and smooth all as specified and directed by GE. 25 S&F for resecuring mild steel gate any type to existing door frame with 3 Nos mild steel hinges as designed including application of oil painting of complete door shutters 26 S&F Factory Made double rebated extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non-toxic additives ( max toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawal strength of 2200N (Face & 1100N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note:- For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made 27 Providing 30mm thick factory-made wire mesh solid WPC door shutter consisting of density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified company, door to be panneled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. (Conforming to IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos. stainless steel butt hinges size 100mm x 25mm x 2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item except meshes. 28 M&L 5mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on ceilling surfaces finished even and smooth all as specified and directed by GE. 30 S&F in repairs fancy type chromium plated two way bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as specified & directed. (Make :-Jaquar cat part no. CON-041 KN). or equivalent as approved by GE. 31 S&F in repair frame less looking mirror fancy type 6 to 8mm thick glass selected quality beveled edges fixed with stainless steel screwed with head of screw not less than 20mm or as approved complete all as specified and directed 1. Old chowkhat with shutters not exc 1.5 Sqm each including all fittings 2. Old chowkhat with shutters exc 1.5 but not exc 4 Sqm including all fittings 3. Old shutter area exc 1 Sqm including all fittings. 4. Old shutter area exc 1 Sqm but not exc 2 Sqm including all fittings. 5. Scrap wood/fire wood 6. Scrap copper 7. Old unserviceable flushing cistern 8 Old brass scrap 9 Scrap iron 10 Old unserviceable PVC tank upto 500 Ltr Capacity including cover 11. Old unserviceable PVC tank 1000 Ltr Capacity including cover 12. Old unserviceable PVC water tank 2000 ltrs including cover 13. Brick bats 14. Brick tiles 15. Old unserviceable AC sheets of any thickness including ridges, corrugated/semi corrugated. 16. Unserviceable AC sheets plain any thickness 17 Old unserviceable Wall/Ceiling board of any thickness any type 18. Old unserviceable CGI sheets plain or corrugated 0.63 mm thick 19 Aluminum Scrap 20 Old unserviceable GI pipe 15mm bore 21. Old unserviceable GI Pipe 20mm bore 22. Old unserviceable GI Pipe 25mm bore 23. Old unserviceable GI Pipe 40mm bore 24. Old unserviceable GI Pipe 50mm bore 25. Old unserviceable CI pipe 75mm bore 26. Old unserviceable CI pipe 100mm bore 27. Old unserviceable wire mesh of any type 28. Old unserviceable wall paneling / partition 29. Old unserviceable steel window any size 30. Old unserviceable barbed wire 31. Old unserviceable stainless steel sink without drainage board any size 32. Old unserviceable stainless steel sink with drainage board 33. Old unserviceable interlocking tiles 34. Old unserviceable PGI sheet any thickness 1 2 35. Old unserviceable CP Bib tap/ stop cock/ pillar cock/ gate valve/ angle valve etc of 15/20mm bore 36. Old unserviceable Bib tap/ stop cock/ pillar cock/ gate valve etc of 15/20mm bore PVC 37. Old unserviceable mixture of any type 38. Old unserviceable PVC pipe any size 39. Old unserviceable LDPE water storage tank 250 litter 40. Old unserviceable PVC sheet cover for water closet 41. Old unserviceable cover for PVC water storage tank 42. Old unserviceable chain link fencing / metal mesh 43. Old unserviceable aluminum door / window any description with fitting 44. Old unserviceable health faucet, Jet spray 45. Old unserviceable PVC cabinet Mirror 46. Old unserviceable Stainless Steel Plate Rack 47. Old unserviceable stainless steel Curtain rod 48. Old unserviceable CP soap dish/ toilet paper holder 49. Old unserviceable towel ring/ towel Rail 50. Old unserviceable CP grating Jali 51. Old unserviceable butt Hinges of any size & any type 52. Old unserviceable stainless steel handle of any type and size 53. Old unserviceable towel rack 54. Old unserviceable stainless steel Cap holder & bracket 55. Old unserviceable steel drawer channel 56. Old unserviceable WPC Jali of any thickness and design 57. Old unserviceable WPC Frame of any size 58. Old unserviceable door glass 59. Old unserviceable door stopper 60. Old unserviceable Peg set 61. Old unserviceable PVC connection 450/600 mm long 62. Old unserviceable floor trap of any type and size 63. Old unserviceable PVC bend ‘T’ (single/double), ‘Y’ (single/double) etc of any size 64. Old unserviceable looking mirror of any type 65. Old unserviceable glass shaft of any type or size 66. Old unserviceable float valve of any type or any size 67. Old unserviceable PVC scrap 68. Old unserviceable post or strut (Wood/Steel/RCC) of any description 69. Old unserviceable Concertina Coil of any size of any description
|
