|
Tender For Special Repair To Building No 3 Powd Under Age Br Ii Of Ge South Pune.; 1 Demolition of cement Concrete in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) including chequered tiling of paver blocks complete all as specified and directed. 2 Demolition of brickwork or precast block walling, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed. 3 Dismanling floor, hearth or wall tiling including cement mortar bedding and backing coat, removing rubbish off the premises, complete all as specified and directed. 4 Demolition of stone slab & tiles of any description or thickness infloor, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed. 5 Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed. 6 Excavation in over areas, n.exc. 1.50m deep and getting out in any type of soil, complete all as specified and directed. 7 Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed. 8 Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified. 9 M&L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6, complete all as specified and as directed 10 M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed. 11 M&L for non skid ceramic colored tiles 8 to 10mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, including demolition of floor, hearthincluding screed bed and removing of debries and demolished materials and rubbish off the premises complete all as specified and as directed. 12 M&L for vitrified ceramic tiles (light shade) 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed 13 M&L for vitrified ceramic tiles (light shade) 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, with and including triangular filleting in CM 1:6 on top edges complete all as specified and as directed. 14 M&L for coloured glazed ceramic designed tiles as in vertical surface 600x 300x 7-8mm thick set and jointed in neat cement slurry and jointed with 3 mm spacers and pointed in coloured epoxy grout to match the colour of tiles laid over and including 10 mm thick backing coat in CM 1:4 to maintain true plumb complete all as specified and directed 15 M&L for non-skid ceramic coloured tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed 16 M&L for non-skid ceramic coloured tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed 17 M&L for granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill, cooking platform and flooring laid over and including bedding layer of 15 mm thick in CM 1:6 on stone / brick masonry / concrete surfaces including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of graniteincluding dismantling of old stone slabs including screed bed and rubbish off the premises complete all as specified and directed. 18 Rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed. 19 M&L for machine cut cuddapa stone slabs one side pre-polished 20 to 25mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar 1:6 complete all as specified and directed. 20 M&L for cutting grooves on stone slabs such as in steps and other similar situations, complete all as specified and directed 21 M&L for RCC (Design Mix) M-25 using 20 mm graded stone aggregate as in beams / lintel over 1.50m span, complete all as specified and directed. 22 M&L for TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed. 23 S & F for TMT bars 6 to 8mm dia as in stirrups, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia,complete all as specified and directed. 24 M&L for form work to flat foundation, footings, bases of column, raft & raft beams, side & soffits of foundation and plinth beams and similar work, fair finished surface of concrete, complete all as specified and directed. 25 M&L for RCC (Design Mix) M-25 using 20 mm graded stone aggregate as in foundation including rafts, footing foundation beams, base for column and mass concrete etc. , complete all as specified and directed. 26 M&L for form work to soffit and sides of floor / roof beams, bends, finished the surfaces rough, complete all as specified and directed. 27 M&L for preparation of old decorated surfaces of walls by brooming down and scrapping whereever necessary and applying two coats of cement base paint white or tinted complete all as specified and directed 28 M&L for preparation of old painted steel surfaces of any descrition exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 29 M&L for preparation of old painted wooden surfaces of any descrition exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 30 Supply only liquid water proofing compound, complete all as specified and directed. 31 M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping, roof kerbs or benching etc., rounded or chamfered on edges etc., complete all as specified and directed. 32 S & F in repairs 18 mm thick PVC sheet as in shutters, one side prelim of any shade as in cupboard or kitchen cabinet etc complete all as specified and directed. 33 S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. 34 S&F in repairs 150mm size extruded aluminium alloy tower bolt fabricated type anodised complete all as specified and as directed. 35 S&F in repairs 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed. 36 S&F in repairs aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. 37 S&F Stainless Steel, 304 grade, Silver finish curtain rod, 25 mm bore (Medium weight) complete all as specified & as directed Make:- Herrlich Homes or equivalent 38 S&F in repairs stainless steel fancy type round shape ball bracket suitable for 25 mm bore curtain rod complete all as specified & directed 39 S&F in repairsStainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel or woodenwindows / door / shutters / frames etc. complete all as specified and as directed. 40 S & F Continuous (piano) hinges 30 mm width of flap, mild steel, bright finish or electrogalvanised complete all as specified and as directed. 41 S & F Magnetic door catches suitable for cupboard /cabinet etc complete all as specified and as directed. 42 S&F 100mm dia Brass handles, cast type, polished bright cupboard handles fixed with nuts screws and washercomplete all as specified and directed. 43 M&L for running welding in repairs not exc. 6mm thick plates and angles complete all as specified and as directed. 44 M&L for precast cement concrete block masonry with solid blocks exc. 10 cm in width and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks, complete all as specified and directed. 45 M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work / concrete surfaces finished even & smooth without using extra cement, complete all as specified and directed 46 M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work / concrete surfaces finished even & smooth without using extra cement, complete all as specified and directed 47 S&F three track sliding window with two or more shutter with and including 4mm thick tinted glass and one shutter using stainless steel wire cloth of 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc by using following aluminium powder coated sections conforming to catalogue of JINDAL or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724(e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. 48 S&F ventilators/louvers using 4mm thick x 10cm wide frosted glass strips and following aluminium powder coated sections conforming to catelogue of JINDAL or of equivalent make and rubber beading etc complete all as directed:-(a)SP : 20048(b)Glazing clips : 19352 49 Material and labour for 15 mm thick polymer modified rendering in cement mortar 1:4 mixed with using integral water proofing liquid admixture such as WAREP 1000/L conforming to IS:2645-2003 of Thermax / Chemco system / Webac chemicals as approved @200 ml/ 50 kg bag of cement or as per manufacturers instructions over and including a coat of acrylic emulsion bonding agent such as TM Bond AR of M/S Thermax / Chemco system / Webac chemicals (as approved) having specific gravity of 1.02, not less than 5% by weight of cement or as per manufacturers instructions for internal and external surface of RCC roof / slab / beams / columns / facias / any brick surface etc. Top of the surface shall be finished even and smooth with using extra cement including all necessary form work, timbering, planking and strutting, scaffolding and taking down of existing cement plaster etc and finishing the surface to match with the existing surface complete all as specified and as directed by Engr-in-Charge.Note:- Liquid water proofing compound will be measured and paid separately. 50 M&L for complete removal of existing treatment and applying two coats of distemper oil emulsion over and including 3 mm thick wall care putty and one coat of akali resistant primer on walls complete all as specified and as directed by Engr-in-Charge 51 Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. 52 M&L for framed work as in grills / guard bars, gratings etc. with ends of bars shouldered and / or rivetted, or forged into spikes; framed guard bars; barred iron door, railings, frame work of water tank, ladder, hand made sliding boltpintle hinges and similar work conforming to Fe 290-0, Gde-E-165, complete all as specified and directed. 53 Supply & fixing rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of etc. confirming to Fe-410-W (Gde-E-250) Quality-A, complete all as specified and directed. 54 S&F framed work ornamental steel gate of MS Square or rectangular pipe, plain sheet or other sections etc. complete drilled for foxing of steel sheeting, including MS arrows design or any other MS designed work and necessary welding etc. of grade Fe-410-W (Gde-E-250 quality B) including fittings and locking arrangements complete including dismantling structural steel including doors or wrought iron work of any description and any position, gates, complete all as specified and directed. 55 M&L PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate), 75 mm thick as in plinth protection and like laid as to bays finished even and smooth with out using extra cement, complete all as specified and directed. 56 M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed. 57 M&L for 25 mm thick PCC 1:2:4 type B-0 (Using 12.5mm graded stone aggregate) as in floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed. 58 M&L for bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, complete all as specified and directed. 59 M&L for preparing new surfaces of steel over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamal (ordinary tint) over a coat of red oxide primer complete all as specified and directed 60 M&L for providing and fixing Gypsum Board 12.5 mm thick in ceiling fixed with screw (as per manufacturer’s instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including two coats of oil bound distemper over primer with 1-2 mm white putty on ceiling including dismantling of existing false ceiling with grid complete all as specified and directed 61 M&L for Gypsum ceiling board for ceiling pre-painted, perforated finish 600 x 600 x 9 to 9.5mm thick in size, of approved brand / make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling using 2 mm thick G.I. suspension wires spaced at 1200 mm on main runners including making niches for fans / light including dismantling of existing false ceiling with grid complete all as specified and directed. 62 M & L for decorative POP cornices / moulding of pattern as per approved by Engr-in-charge of cross section area exc. 13 Sqcm and not exc. 25 Sqcm including two coats of oil bound distemper over a coat of primer on ceiling complete all as specified and directed. 63 M&L for preparation of newly plastered surfaces and applying two coats of weather proof exterior acrylic emulsion paint (1st quality) of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer on surfaces of walls, facia of columns, boarder etc, complete all as directed by Engr-in-Charge.Note:- Exterior acrylic emulsion paint shall be of antifungal, dust resistant, water replant, crack-bridging, weather proof type 1st quality. 64 Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc. complete all as specified and directed 65 Dismantling battens for tiles shingles etc of any size including tiling fillets exc. 15 cm spacing complete all as specified and directed. 66 M&L for providing and laying of 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern laid over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. 67 All as per item no. 66 but except cement concrete paver block complete all as specified and as directed. 68 Dismantling timber scantling in any position (unframed work) exc. 40 Sqcm in section complete all as specified and directed. 69 Dismantling timber scantling unframed in post, rafters, purlins etc under40 Sqcmin sectionand M&L for plain fillets of IInd class hard wood exc. 13 but n. exc. 25 Sqcm in section square rectangular or triangular in section secured with screwes complete all as specified and directed. 70 Dismantling of plain or corrugated steel sheeting in roof covering complete all as specified and directed. 71 S & Froof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick, 150 GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. 72 S & Froof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick, 150 GSM of any colour having tensile strength of 550 Mpa as in roof covering / ridgesl, fixed with self tapping screws complete all as specified and directed. 73 M&L for preparing of new and old surfaces of walls and applying 3mm thick wall care putty with and including applying of two coats of acrylic interior emulsion over a coat of primer complete all as specified and as directed 74 Supplying, fixing, jointing and testing galvanised steel tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor complete all as specified and as directed for the following sizes:-(a) 15 mm dia bore 75 (b) 20 mm dia bore 76 (c) 25 mm dia bore 77 M&L for 300x300x25mm thick high glossy finish parking tiles as in floor set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed 78 S&F in repairs 25mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed Each complete all as specified & directed. 79 M&L for cutting chases, pinning in, concrete block / brick / stone walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed. 80 S&F in repair vitreous china wash hand basin, white, 550x 400mm flat back including M&L for providing Cl brackets, PVC waste pipe 32mm dia, waste coupling 32mm bore of CP and 15mm bore CP fancy type pillar cock complete all as specified and directed 81 S&F in repairs vitreous china, squatting pan, ‘Orissa pattern, size 580 x 440 mm white, with integral foot rest, including provision of concrete bedding, inlet, outlet pipe connections etc. complete all as specified and directed 82 S&F in repairs 10 Iitre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe 32 mm dia etc complete all as specified and directed 83 S&F in repairs 15mm bore bib taps, brass chromium plated, cast copper alloy fancy type handle screwed down, screwed for iron pipes complete all as specified and directed 84 S&F in repairs 15 mm bore pillar taps, fancy type 200 mm extension long neck body cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, complete all as specified and directed.Make:- Jaquar-ORP-CHR-10021PM orequivalent. 85 S&F in repairs 15 mm chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed. Make:- Jaquar or equivalent as directed by Engr-in-charge 86 S&F in repairs 15 mm stop valves / angular stop cock, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed 87 S&F in repairs 15 mm concealed stop valves / angular stop cock, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed 88 S&F in repairs CP Wall mixer 3-in-1 for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe, Make:- Jaquar prime series OPP-15117 PM or equivalent complete all as specified and directed 89 S&F in repairs 300 mm dia brass chromium plated shower rose including shower arm Make- Jaquar OHS-CHR-1633 or equivalent complete all as specified and directed 90 S&F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed 91 S&F brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed. 92 S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed 93 S&F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed. 94 S&F towel ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats fixed in repairs, complete all as specified and directed 95 S&F in repairs 5.5mm thick bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium beading all around complete all as specified and directed. 96 S& F in repair 5mm thick sheet glass corner shelf, 250mm radius including CP railing and CP brackets, complete all as specified and directed 97 S&F in repairs stainless steelkitchen sink without drainage board of1 mmthickwith plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets or fixed as in counter type in granite/ cudappa platform and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. 98 S&F in replacement rotational moulded polyethylene water storage tank 1000 Litres capacity, double layered, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tanks and removing to store, including making all connections to inlet and outlet pipe lines,including providing of new tank nipples of suitable size, complete all as specified and directed by Engineer-in-Charge. 99 S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including dismantling of old unserviceable breaking up drain pipes PVC set in solvent,complete all as specified and directed.Note for item nos. 99 & 100:- The quoted rates of this item shall be deemed to be inclusive of necessary scaffolding & security measures as the work has to be carried out for elevated height upto 12 mtr height building. 100 S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including dismantling of old unserviceable breaking up drain pipes PVC set in solvent etc. complete all as specified and directed. 101 S&F 110mm bore PVC (SWR)bends / Tee with acess door, complete all as specified and directed. 102 S&F 75mm bore PVC (SWR)bends / Tee with acess door, complete all as specified and directed. 103 S&F in repair cascade type (coloured) floor mounted water closet with low level flushing cistern single piece coloured with floor trap PVC coloured seat cover and connecting pipe etc. complete all as specified and directed by Engr-in-charge.Make: Jaquar cat no. FNS-WHT-40751P180UFSMZ OR equivalent make as mentioned here-in-after. 104 S&F in repairs 2mm thick PVC fibre mirror cabinet of size 450x325x120mm and fixed to wall after taking down of old mirror, complete all as specified and directed 105 S&F in repairs, stainless steel plate rack of size 36 inch x 39 inch x 10 inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), with S S screws and round pipe, fixed to wall with screws & royal plug complete all as specified and as directed. Make:- Blue Star Silver Shine Cat No.KPR-315 or equivalent from Nirali / Jain Brothers Sanitation Pvt Ltd (Javna) as approved 106 Taking down shutters of any description exc. 1.0 sqm but n.exc. 2.00 Sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as specified and directed. 107 Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. 108 Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. 109 S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in openingincl taking down of chowkat with shutter without taking off shutters from the frame including making good the distrubed surface complete all as specified and directed. 110 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottomrails .M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width struckinside with solvent cement for stilesand plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions complete all as directed by Engineer-in-Charge. 111 S&F 100mm size of butt hinges, medium weight cold rolled mild steel complete all as specified and as directed. 112 S&F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), including taking down of old unserviceable barbed wire of any type complete all as specified and directed. 113 Supply and fixing mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. and similar work conforming to Fe 290 Gde E-165,complete all as specified and directed. 114 M&L for 25mm thick pre-formed filler board, complete all as specified and directed. 115 M&L for broken glass coping on top of walls, built in cement mortar 1:3, complete all as specified and directed. 116 M&L for Forming square grooves in plaster n. exc. 12mm deep and n. exc. 15mm on face complete all as specified and as directed. 117 Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, celling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as directed by Engineer-in-charge. 118 M&L for point wiring with 1.5 Sqmm PVC (FRLSH) insulated, PVC sheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continuous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated sheathed multi stranded copper conductor cable draw in conduit including CI/MS sunk boxes concealed in wall for mounting switches, sockets, regulators etc. with 3 mm thick plastic laminated sheet cover of adequate size for one light / fan / bell point controlled by one switch and making good disturbed surfaces with cement mortar of 1:4 to match with the existing surface complete all as specified and directed by Engr-in-Charge 119 All as item no. 118 but for One 5 Amps socket point on independent board, complete all as specified and directed by Engr-in-Charge. 120 All as item no. 118 but for One 5 Amps socket point on same board with other switches, complete all as specified and directed by Engr-in-Charge 121 M&L for point wiring with two single core 4 Sq.mm size multi-stranded copper conductor PVC insulated cables and one single core 4.0 Sq.mm size green colour PVC Point insulated, multi-stranded copper conductor PVC cable as earth continuity conductor, 1100 volts grade, complete drawn in and including rigid PVC conduit and conduit accessories, confirming to IS specifications, concealed in wall/ ceiling trusses with suitable clamps, screws etc., including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting socket outlet 15 Amps multi purpose on independent board ches, sockets, fan regulators etc., including connecting up and testing, all as specified and as directed by Engr-in-Charge 122 M&L for dismantling and taking down of fluorescent tube light frame single / double / street light fittings / ceiling light of any wattage or size for repair or replacement of burnt / worn out accessories complete all as specified and directed by Engr-in-Charge. 123 S&F in replacement of LED tube light batten 20 W, 4 feet length 6500 k, 120 Ims/watt, Aluminium housing, glare free, PH>0.95, THD<10% and should have supporting 79 & LM 80 test certificate complete all as specified and directed by Engr-in-Charge 124 Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, min 100 lm/W, 5700 k, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size and Each should have supporting LM 79 & LM 80 test certificate complete all as specified and as directed by Engr-in-Charge 125 Taking down fan/ exhaust fan, sealing cable end, dismantling blades and removing fan and blades to stores complete all as specified and directed by Engr-in-Charge. 126 Hanging only ceiling fans and connecting up and including provision of cable of suitable size from ceiling rose or connector to fan complete all as specified and directed by Engr-in-Charge. 127 Supply and fix in replacement of modular five step type fan regulator 120 Watts, 2 module complete all as specified and directed 128 S&F in repairs lamp holder, PVC / polycarbonate type with back plate complete all as specified and directed 129 Fixing only exhaust fan and connecting up and including provision of cable of suitable size from celling rose / connector to fan complete all as specified and directed by Engr-in-Charge. 130 Supply and fixing in repair LED building security light fitting 35 Watt 230 V AC, the LED shall comply with L70810 Voltage range, min 120 Ims/watt, PH>0.95, THD<10% with certificate LM79, LM80, TTC, outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge. 15 Supply and fix in replacement of modular switch piano type 10 amps one way one module complete all as specified and directed by Engr-in-Charge. 131 Supply and fix in replacement of modular switch piano type 10 amps one way one module complete all as specified and directed 132 Supply and fox in repairs modular Socket, 6A-2/3 pin combined 2 module, make ISI marked, complete all as specified and directed. 133 S&F in repairs modular switch socket combination 16A, 6 pin, 3 module complete all as specified and directed. 134 S&F in replacement of door bell AC 230 volts, single phase, ding dong type complete all as specified and directed. 135 S&F in replacement modular Bell push 6A, 1 module, complete all as specified and directed. 136 M&L for sub main wiring with two runs of single core PVC FRLSH insulated cable with copper conductor multi-stranded, 1100 volts grade, 1.50 Sqmm drawn through and including with suitable size of PVC conduit including its accessories, concealed on wall surface in ceiling along with fixing arrangement etc. including one runs of 1.50 Sqmm PVC FRLSH insulated multi-stranded copper earth continuity conductor and connected to common earth dolly complete all as specified and directed by Engr-in-Charge.Note:- One meter length of PVC Conduit and 3 runs of 1.50 sq mm multi-stranded copper conductor cable shall be measured as one unit length. 137 M&L for sub main wiring with two runs of single core PVC FRLSH insulated cable with copper conductor multi-stranded, 1100 volts grade, 4.00 Sqmm drawn through and including with suitable size of PVC conduit including its accessories, concealed on wall surface in ceiling along with fixing arrangement etc. including one runs of 4.00 Sqmm PVC FRLSH insulated multi-stranded copper earth continuity conductor and connected to common earth dolly complete all as specified and directed by Engr-in-Charge.Note:- One meter length of PVC Conduit and 3 runs of 4.0 sq mm multi-stranded copper conductor cable shall be measured as one unit length. 138 M&L for sub main wiring with two runs of single core PVC FRLSH insulated cable with copper conductor multi-stranded, 1100 volts grade, 6.00 Sqmm drawn through and including with suitable size of PVC conduit including its accessories, concealed on wall surface in ceiling along with fixing arrangement etc. including one runs of 6.00 Sqmm PVC FRLSH insulated multi-stranded copper earth continuity conductor and connected to common earth dolly complete all as specified and directed by Engr-in-Charge.Note:- One meter length of PVC Conduit and 3 runs of 6.0 sq mm multi-stranded copper conductor cable shall be measured as one unit length. 139 Supply & fixing in repair of sheet metal enclosure VTPN MCCB DB double door, 6 way suitable for fixing of MCCB up to 125 Amp, including insulated copper bus bar assembly, IP43 type complete all as specified and directed 140 Supply & fixing in repairs of sheet metal enclosure MCB DB SPN 12 ways double door type with 200 Amps copper bus bar complete all as specified and directed. 141 S&F in replacement of C Curve MCB SP 6-32 Amps working on 240 volts, 50 Hz 10 KA complete all as specified and directed 142 S&F in replacement of C Curve MCB SPN, 32 Amps working on 240 volts, 50 Hz 10 KA complete all as specified and directed 143 M&L for painting of ceiling fans complete, in situ by applying one coat of synthetic enamel paint by spraying including preparation of surfaces, cleaning all dust etc & filling cavities with filler etc complete all as specified and directed by Engr-in-Charge 144 Supply and fix in repair of ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed 145 S&F in repairs brass chromium plated connection 15 mm dia, 600 mm long (heavy duty) with 2 Nos brass chromium plated nuts and washer suitable for hot water complete all as specified and directed by Engr-in-Charge 146 Taking down king down unserviceable old bracket from building security light pole and supply and fix new building security light bracket made out of MS pipe heavy duty 40 mm dia and not exceeding 1.50 m in length including fixing with fittings & fixture like two nos. of mild steel clamp fabricated out of MS flat of suitable size including nut, bolt, washers etc to fix the bracket on pole complete all as specified and directed by Engr-in-charge. 147 S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with double pole, 20 Amps, 220 Volts complete all as specified and directed 148 S&F in replacement of Modular white cover with frame 2 module complete all as specified and directed by Engr-in-Charge 149 S&F in replacement of Modular white cover with frame 3 module complete all as specified and directed by Engr-in-Charge 150 S&F in replacement of Modular white cover with frame 4 module complete all as specified and directed by Engr-in-Charge 151 S&F in replacement of Modular white cover with frame 6module complete all as specified and directed by Engr-in-Charge 152 S&F in replacement of Modular white cover with frame 8 module complete all as specified and directed by Engr-in-Charge 153 S&F in repairs of MCCB 4 pole, 415 Volts, 100 Amps current rating with breaking capacity 16 KA including with connection, testing and commissioning etc. complete all as specified and directed. 154 S&F in replacement decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp 822 base including 01x9 W LED bulb (warm white) and connecting up with twin core twisted flexible copper conductor cable from celling rose complete all as specified and directed by Engr-in-Charge. 155 S&F in replacement for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground Each Set 1 level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR Part-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc. complete all as specified and directed by Engr-in-Charge
|
