|
Tender For Additional / Alteration Of Building No. T-1 And T-2 At Mitsd Under Age B/R-Ii Of Ge South Pune; 1 M&L for coloured Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) 400x400, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed 20 mm thick in cm 1:6 complete all as specified and directed 2 Demolition of brickwork or precast block walling, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed. 3 Dismanling floor, hearth or wall tiling including cement mortar bedding and backing coat, removing rubbish off the premises, complete all as specified and directed. 4 S&F in repairs high density polythene pipe 50mm dia (HDPE) of pressure rating 6kgf/cm² fixed complete to wall or floor incl bend, tee, elbow etc. complete all as specified and directed. 5 Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed. 6 Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed. 7 Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified. 8 S & F in repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap including removal of old from site complete all as specified and directed 9 S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed 10 S&F 0.5mm thick pre painted/coloured Galvalume aluminium zinc coating Gl based trapezoidal profile sheet of an colour having tensile strength of 550 Mpa as in roofing fixing all as per manufactures instructions fixed on roof with all fittings complete all as specified and directed 11 M&L for mirror polishing on marble / granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as directed by Engr-in-Charge 12 M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed. 13 S & F 0.5mm thick pre painted/coloured galvalume aluminium zinc coating GI based trapezoidal profile sheet of an colour having tensile strength of 550 Mpa as in roofing fixing all as per manufactures instructions fixed on roof with all fittings and accessories including dismantling plain or corrugated AC sheeting any gauge, any thickness complete all as specified and directed 14 S&F 0.5mm thick pre painted / coloured Galvalume Aluminium zinc coating GI based plain sheet of an colour having tensile strength of 550 Mpa as in ridge, valley gutters etc including dismantling plain or corrugated AC sheeting any gauge, any thickness complete all as specified and directed 15 S&F in repairs PVC connection pipe 450mm long as suitable with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer, complete all as specified and directed 16 M&L for coloured glazed ceramic designed tiles as in vertical surface 600x 300x 7-8mm thick set and jointed in neat cement slurry and jointed with 3 mm spacers and pointed in coloured epoxy grout to match the colour of tiles laid over and including 10 mm thick backing coat in CM 1:4 to maintain true plumb complete all as specified and directed 17 S&F CP brass wall mixer suitable for mixing of hot & cold water swan neck pattern Eac as approved, screwed down for 15mm dia iron pipe, complete all as specified and directed 18 S & F in Aluminium anodised powder coated as approved three track sliding window with two shutters with 4mm thick tinted sheet glass of approved shade and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips incl making provision for cooler at places where directed etc using following aluminium powder coated sections conforming to catalogue of JINDAL or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 19 S&F, aluminium anodised with powder coated as approved, louvered ventilator with provision of exhaust fan using Aluminium section including 5mm thick frosted glass and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm etc complete and following aluminium powder coated sections conforming to catalogue of JINDAL or of equivalent make and rubber beading etc all as directed. (a) SP 20048 (b) Glazing clips 19352 20 M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete including dismantling old tiles/ levelling natural ground to receive sub base as required at site complete all as specified and directed 21 S & F chequered cement concrete tile 300x300x25 mm thick set and jointed in neat cement slurry and ponted in grey cement & pigment (glossy finish/rubber moulded) laid over and including screed bed 20 mm thick in cm 1:6, complete all as specified and directed 22 M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in haunching at the edges of chequred tiles etc including demolition of old concrete of any description, complete all as specified and directed 23 M&L Vitrified wooden textured plank tiles matt finish, 8-10 mm thick 200x1200 mm, area of each tiles in dado set and jointed in neat paste of tile adhesive laticrete, sika or equivalent make with spacers 3 mm wide and pointed in epoxy grouting including backing coat plaster 15 mm thick in cm 1:3 complete including taking down plastering of any type/ thickness, removing un serviceable rubbish off the MOD land, complete all as specified and directed 24 S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, with both side laminated wooden texture as approved water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size 100 mm with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer-In-Charge 25 S&F 200 mm long stainless steel soft closing barrel tower bolts complete all as specified and as directed. 26 S&F 150 mm long stainless steel soft closing barrel tower bolts complete all as specified and as directed 27 S&F 150 mm stainless steel handles, fabricated type, complete all as specified and as directed 28 S&F 300 mm stainless steel aldrop/sliding door bolt of selected quality, fabricated type, complete all as specified and as directed 29 M&L for applying two coats cement base paint (snowcem) over a coat of primer on new walls surfaces, including preparation of surface of walls, complete all as specified and directed. 30 S & F Solid PVC ceiling consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and Gl frame wk and hanged with and including Hangers 6 mm dia. G.I. (any length) adjusting level fixed to roof slabs/truss/ purlins/truss by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long PVC Cornice patty/ fillet/leaping and fixing at site on Gl frame as per specifications and drawing including dismantling wall/ ceiling boards (fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness including Cover Fillets and aluminium / Gl snap grid of any description, complete all as specified and directed 31 S & F Anodised aluminium grill (anodised transparent or dyed to required shade Kg according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as per requirement & directions of Engineer-in-charge 32 S&F 0.5mm thick pre painted/coloured Galvalume aluminium zinc coating Gl based plain sheet of an colour having tensile strength of 550 Mpa as in ridge, valley gutters etc complete all as specified and directed 33 M&L for complete removal of existing treatment by scrapping old painted any treatment scrubbing down with water and applying two coats of Oil Bound distemper over alkali resistant primer over 2mm thick putty in two coats including removing nails, filling holes and undulations with POP complete all as specified and directed. 34 Supply & Laying, jointing & testing in replacement of UG LT cables XLPE insulated, aluminium conductor multi stranded armoured heavy duty 1100 Volt grade cross sectional area 25 sqmm 4 core laid in trenches/ ducts/along poles/through pipe under road etc with new aluminium lugs of cable size complete all as specified and directed 35 Supply and laying 50 mm outer dia, double walled corrugated (DWC) HDPE duct pipe confirming to IS-16205 Pt-24 with antirodent and non flame propagating properties of approved colour complete with fittings i.e. coupler, Tee, elbow clamp for cable protection complete all as specified and directed by Engr-in-Charge. 36 M&L in replacement Earthing complete with galvanised steel earth plate electrode 60×60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 32x6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, earth strip protected by provision of Gl medium grade pipe 50mm dia including provision of concrete pit in PCC (1:2:4) type 81 using 20mm graded stone aggregate with 40mm thick RCC cover in CC 1:2:4 type B1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including Gl medium grade 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate, test point made out of phosphorus bronze with fixing arrangement funnel, wire mesh and earth work in hard/dense soil returning filling in and removal of surplus soil to a distance not exceeding 50mtr all as shown in electrical plate No. 3 of SSR Part 1 2009 connected to earthing test point all as specified or indicated including testing on completion NOTE:-GI strip and Gl pipe 40mm bore medium grade for encasing Gl strip beyond 7.50m length 37 M&L for precast cement concrete block masonry with solid blocks exc. 10 cm in width and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks, complete all as specified and directed. 38 M&L for rendering 10mm thick in CM (1:4) on fair faces of brick work / concrete surfaces finished even & smooth without using extra cement, complete all as specified and directed 39 Supply & fixing rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of etc. confirming to Fe-410-W (Gde-E-250) Quality-A, complete all as specified and directed. 40 M&L for preparing new surfaces of steel over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamal (ordinary tint) over a coat of red oxide primer complete all as specified and directed 41 Supplying, fixing, jointing and testing galvanised steel tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor including taking down of old existing pipe complete all as specified and as directed for the following sizes:-(a) 15 mm dia bore 42 (b) 20 mm dia bore 43 M&L for cutting chases, pinning in, concrete block / brick / stone walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed. 44 S&F in repair vitreous china wash hand basin, white, 550x 400mm flat back including M&L for providing Cl brackets, PVC waste pipe 32mm dia, waste coupling 32mm bore of CP complete all as specified and directed 45 S&F vitreous china wash down water closet pan (pedustal pattern) white excluding flusing cistern flush pipe and including fixing of seat cover, complete all as specified and directed.Make-CERA, Cat part No.S1053121 CELEB or equivalent make from the list of makes. 46 S&F in repairs 10 Iitre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe 32 mm dia etc complete all as specified and directed 47 S&F in repairs 15 mm chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed. Make:- Jaquar or equivalent as directed by Engr-in-charge 48 S&F in repairs 15 mm stop valves / angular stop cock, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed 49 S&F brass chromium plated, fancy type shower rose, 125x125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore, complete all as specified and directed. 50 S&F in repairs 5.5mm thick bevelled edge mirror of selected quality glass, 600x450mm size, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium beading all around complete all as specified and directed. 51 Supply and fixing in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for 15mm bore GI pipe, complete all as specified and directed. 52 S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall,complete all as specified and directed. 53 S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall,complete all as specified and directed. 54 S&F 110mm bore PVC (SWR)bends / Tee with acess door, complete all as specified and directed. 55 S&F 75mm bore PVC (SWR)bends / Tee with acess door, complete all as specified and directed. 56 M&L for 75mm dia, cast iron floor trap with stainless steel grating including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, complete all as specified and directed. 57 S&F in repairs vitreous china, squatting pan, Orissa pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections and 32mm thick PVC Flush pipe for low level cistern etc, complete all as specified and directed 58 M&L for granite Telephonic jet Black of selected quality 18-20mm thick (of any type) work (table rubbed and polished) in steps, pillar, window cill, window jambs, door chowkats, shelf, cooking platform, Cill patty over dado tiles of any width and like in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and rounding, moulding, polishing edges of granite at one edge, laid over and including 15mm thick screed in CM 1:4, complete all as specified and as directed 59 Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed. 60 Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed. 61 Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, celling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as directed by Engineer-in-charge. 62 M&L point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metallic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and also including PVC insulated ISI marked unsheathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, PVC Cover palate with frame suitable for modular type switches, sockets, fan regulator etc complete all as specified and directed by Engr-in-charge for the following:-(a) One light controlled by one switch one way 63 (b) One Fan controlled by one switch one way 64 (c) One 3 pin socket outlet, 5 amps on independent board 65 (d) One 3 pin socket outlet, 5 amps on same board 66 (e) One 3 pin socket outlet, 15 amps on independent board but with cable 2.5 Sqmm and 2.5 sqmm as earth wire 67 M&L modular socket 6A-2/3 pin, 2 module, complete all as specified and directed 68 Taking down the ceiling fan carefully and cleaning / Servicing the fan if any repairs / replacing of parts required complete including painting the fan with enamel spray paint white coloured and fixing back the fan with fixing accessories required at site, complete all as specified and directed by Engr-in-charge. 69 Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete all as specified and directed by Engr-in-charge. 70 M&L for sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 6 Sqmm, 1100 Volts grade, drawn in and including surface conduit heavy grade not less than 20mm complete with accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed Note:- Two runs of 06 Sqmm cable with 01run of 06 Sqmm earth wire along with PVC conduit shall be measured as one RM. 71 S & F factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified and directed by Engr-in-chargeMake/Model of VTPN DB: Legrand/L&T/ Siemens. Note MCB/MCCBs will be measured and paid separately under respective items of BOQ. 72 S&F MCB DB 08 way SPN double door sheet metal enclosure factory made suitable for MCB DBs 240 volts with 200 amp rated bus bar, neutral & earthing link bar, surface mounting complete including taking down the existing DB of any type & size along with its accessories by removing from existing circuits and re-fixing the new DBs and existing circuits complete all as specified and directed by Engr-in-charge 73 Supply and fixing in repair LED building security light fitting 35 Watt 230 V AC, the LED shall comply with L70810 Voltage range, min 120 Ims/watt, PH>0.95, THD<10% with certificate LM79, LM80, TTC, outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge. 15 Supply and fix in replacement of modular switch piano type 10 amps one way one module complete all as specified and directed by Engr-in-Charge. 74 S&F MCB SP 6 to 32 Amps 240V, 10 KA breaking capacity, C curve as per IS/IEC 60898-1 2002 with IP 20 Ea protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing, complete all as specified and directed by Engr-in-charge 75 Supply and fix of C Curve MCB SPN 40 Amps working on 240 volts, 50 HZ, 10 KA complete all as specified and directed by Engr-in-charge 76 Supply and fixing in replacement of plastic body exhaust fan, AC single phase, 240 V, size 200 mm sweep with louvers all as specified and as directed. Note:- (i). Separate louvers of suitable size is to be provided and the cost of same shall be deemed to be included in unit quoted rates.(ii). Old exhaust fan shall be deposited in MES store Make: Usha make 200mm Crisp Air VX or equivalent in Havells/Crompton 77 M&L modular switch 1 way 16A 1 module. Make: Vnay/Roma, complete all as specified and directed 78 M&L Modular socket 16A 2/3 Pin 2 Module. Make:Vinay/Roma, complete all as specified and directed 79 M&L in replacement of modular electronic step type ceiling fan regulator Conform IS 4615-1968 120W, 2 module, complete all as specified and directed 80 S&F ceiling rose surface shall comply with IS 371-1979 Bakelite 60x 25 mm two to three terminals plates and of outside diameter not less than 63.5mm, complete all as specified and directed 81 M&L modular socket 6A-2/3 pin, 1 module, complete all as specified and directed 82 S&F in replacement of LED light fittings 20W 220V AC 4 feet tube light fitting extruded polycarbonate housing and robust construction LED lighting with high lumen output environmental friendly energy efficient CRI-6500K P.F not less than 0.95 fixed on PVC square for mounting the fitting & electrically connecting with three core 23/0.0076 PVC insulated multi strand copper flexible cable from ceiling rose to light fitting and for earthing complete all as specified and directed. Make Luker Cat part No. LT520P or equivalent in Philips/Wipro 83 S&F in replacement 1x10 watt, 230V surface and wall mounted LED batten suitable for mirror light with polycarbonate housing and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed 84 S&F in replacement of polycarbonate angle holder retrofit type suitable for LED bulb of B-22 base including 01 no. 15 watt LED Bulb complete all as specified and directed by Engr-in-Charge 85 S&F LED security light fitting 30 Watts, IP-65 protection made up of die cast aluminium housing with high Ea power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment complete fixing with GI bracket made out of 40mm bore GI pipe light grade suitable length bend to shape and fixed to pole / wall with necessary MS clamp accessories complete all as specified and directed by Engr-in-charge. Make- Luker Cat Part:LSTE30(Sleek series) or equivalent in Havells / Crompton 86 M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc all as specified and directed by Engr-in-Charge.
|
