Bids Are invited for Locker Bedside Steel Fd 1029 - Overall Size Shall Be 760Mm Long 600Mm Wide And 1100Mm H ... in India
Tender Notice
TenderID
106816879
Tender Brief
Bids Are invited for Locker Bedside Steel Fd 1029 - Overall Size Shall Be 760Mm Long 600Mm Wide And 1100Mm High All The Sides Of Locker Including Partion Shelves Legs Shall Be 1Mm Thick Mild Steel Sheet Two Legs Shall Be Provided To Lockers As Shown
Bids Are invited for Locker Bedside Steel Fd 1029 - Overall Size Shall Be 760Mm Long 600Mm Wide And 1100Mm High All The Sides Of Locker Including Partion Shelves Legs Shall Be 1Mm Thick Mild Steel Sheet Two Legs Shall Be Provided To Lockers As Shown On Drawing Two Handles Chromium Plated 100Mm Long Fixed To Shutters And One Hasp And Staple 75Mm Long Shall Be Fixed To Shutters The Weight Of The Locker Shall Not Be Less Than 42 Kgs Rest All As Per Drg And Specification Provided , Charpoy Ms Plytop Fd Map Ii 01 - Overall Size Shall Be 1980Mm Long 900Mm Wide And 440Mm High Two Long Rails And Two Short Rails Shall Be Of 25Mmx65mmx16 Gauge Ms Rectangular Pipe The Legs Shall Be Of Size 32Mmx32mmx16 Gauge Welded To Long And Short Rails As Shown On Drg Two Stiffeners Of Size 25Mmx25mmx16 Gauge Shall Be Provided In Equidistant Between Two Opposite Long Rails 12Mm Thick Bwr Plywood Shall Be Provided For Top As Shown On Drg With Proper Nut And Bolt One Nut And Bolt Shall Also Be Provided At Centre Of Each Stiffeners For Fixing The Plywood Irrespective Of What Is Shown On Drg Pvc Hard Rubber Shoes Shall Be Fixed At Bottom Of Each Leg All Steel Surfaces Shall Be Powder Coated As Specified Rest All As Per Drg All Joints Welding & Fixing Shall Be Done In Accordance With The Standard Workmanship And Specification And As Shown On Drawing And As Directed By Engr-In-Charge , Chair Writing Fd 280 - Overall Size Shall Be 535Mm Long 470Mm Wide And 890Mm High Well Seasoned Teak Wood Throughout In Frame Work Shall Be Used For Frame Work Front Leg Shall Be 55X30 Mm In Section And 660 Mm High While The Rear Legs Are 55X30 Mm In Section And 890 Mm High Caning Shall Be Done Without Any Joint In The Cane The Cane Shall Be Of 2Mm Wide Point 4Mm Thick Half Round The Sides Of The Chair Shall Be Canned With 4Mm Thick Cane Hard Rubber Rings Of 25Mm Dia And 25Mm High Shall Be Screwed To The Bottom Of All Legs Rest All As Per Drg And Specification Provided , Table Peg With Glass Top - Overall Size Be 4
Contact Information
Address
Kupwara
View Notice Now...
Fill Detail for Getting Instant Access
Download Tender Document / Tender Notice
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 106816879
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.