|
Empanelment Of Contractors For Detailed Design Development, Fabrication, Supply, Installation, Testing And Commissioning Of Internal And External Signage Systems For Sachivalaya, Karmayogi Bhavan, Mla Quarters, Minister Bungalows And Nirman Bhavan, And Other Government Buildings In Gujarat State- Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A1. Sky Sign – Vidhan Sabha, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Where Required By The Engineer/Authority, The Contractor Shall Prepare Detailed Shop/Fabrication Drawings Based On The Consultant’S Design And Obtain Approval Prior To Fabrication, Incorporating Any Changes Instructed. The Work Includes 150 Mm Deep Aluminium Channel Letters With Pu Painted Finish, 5 Mm Day/Night Acrylic Faces Secured With Approximately 25 Mm Trim Caps Or Equivalent, Internally Illuminated Using High-Efficiency White Led Modules And Suitable Drivers, With Accessible Maintenance Provisions. The National Emblem Shall Be Formed From Die-Cast Aluminium, Pu Coated And Fixed As Detailed. All Letters And Emblem Shall Be Fixed To The Façade Using Stainless Steel Anchor Bolts And Structural Brackets Designed By The Contractor, Including Any Breaking, Cutting Or Drilling Of Existing Rcc/Steel/Masonry Surfaces, Provision Of Inserts, Local Structural Steel If Required, Corrosion Protection, And Complete Restoration Of All Disturbed Finishes. All Associated Electrical Works, Frls Cabling, Junction Boxes, Earthing, Control Gear, Testing, Focusing, Protection Of Adjacent Elements, Cleaning, And Any Dismantling/Re-Fixing Required Shall Be Included, With Due Care To Avoid Damage To The Façade And Structure., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A1.1 Vidhan Sabha Block Number Signage, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Wherever The Engineer/Authority So Decides, The Contractor Shall Develop And Submit Shop/Fabrication Drawings Based On The Consultant’S Design, Incorporating Any Required Modifications And Obtaining Approval Before Fabrication. The Work Includes A 50 Mm Deep Aluminium Box Base Panel Fabricated From Minimum 2 Mm Sheet With Internal Gi Framework, Pu Painted And Fixed To The Wall Using Anchor-Bolt Assemblies And Brackets, Including Drilling And Rcc/Brick Interface Detailing. Lettering Shall Be 100 Mm Deep Backlit Aluminium Channel Letters With Custom Front Trim Cap (Approx. 15 Mm Visible Rim) Holding 4 Mm Acrylic Faces With Approved Translucent Vinyl Or Equivalent; Letters Internally Illuminated With White Leds And Weather-Proof Power Supplies. All Steelwork, Anchors, Breaking/Cutting Of Rcc, Masonry Or Steel Where Necessary, Sealing Of Penetrations And Full Making-Good/Restoration Of Disturbed Surfaces Are Included, As Well As Electrical Cabling In Conduits, Junction Boxes, Earthing, Testing, Cleaning, Protection And Any Dismantling/Re-Installation Required, With Care To Avoid Damage To Existing Structure And Finishes At Upper-Floor Mounting Locations., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A2. Landmark Sign, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Shop And Fabrication Drawings Shall Be Prepared And Submitted For Approval Whenever Required By The Engineer/Authority, Reflecting Any Design Refinements Agreed With The Consultant. Work Includes A Custom Aluminium Profile Box Fabricated From Minimum 2 Mm Sheet, With Additional 2 Mm Aluminium Panels, All Pu Painted And Clad Onto An Internal Hot-Dip Galvanised Gi Structural Framework. The National Emblem Shall Be Die-Cast Aluminium With Pu Finish. Main Identity Shall Be Formed Using Aluminium Channel Letters Approximately 75 Mm Deep With 5 Mm Front Rim Supporting 4 Mm Acrylic Faces With Translucent Vinyl Or Equivalent, Internally Illuminated With White Leds And Drivers Housed In Accessible Compartments. Fins Shall Be Fabricated From Gi Rhs Sections (Around 150×50×5 Mm), Cleaned, Corrosion-Protected And Pu Painted. The Contractor Shall Design And Construct Necessary Rcc Foundations, Anchor Bolts, Base Plates And Connections, Including Excavation, Concreting, Grouting, Backfilling And Any Breaking Of Pavements/Slabs, Interface With Structural Steel Or Masonry And Full Reinstatement Of Landscape And Hardscape. All Wiring, Earthing, Protection, Testing, Cleaning, And Careful Dismantling/Re-Fixing If Required Are Included., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A3. Gate Identification Sign Pylon, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Structural Requirements, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Where The Engineer/Authority Deems Necessary, The Contractor Shall Prepare Detailed Shop/Fabrication And Erection Drawings Based On The Consultant’S Design And Obtain Approval, Accommodating Any Changes Instructed. The Sign Shall Comprise A Custom Aluminium Box From Minimum 2 Mm Sheet, Pu Painted, With Cnc-Cut Aluminium Profile Panels Fixed To An Internal Gi Structural Framework. The National Emblem Shall Be Die-Cast Aluminium, Pu Finished. A Charkha Feature Shall Use Approximately 8 Mm Acrylic With Hairline-Finish Stainless-Steel Overlay Or Equivalent, Side Edge Lit By Internal White Leds. Aluminium Channel Letters Around 50 Mm Deep With 5 Mm Front Rim Shall Support 4 Mm Acrylic Faces, Internally Led Lit. Additional Content And Patterns Shall Be Laser Cut, Backed With Acrylic Or Day-Night Acrylic And Internally Illuminated With White Leds In Varied Colour Temperatures As Detailed. Bottom Skirting Shall Be 2 Mm Pu Painted Aluminium. The Item Includes Structural Design, Rcc Foundations Or Steel Supports, Anchor Bolts, Any Required Breaking/Cutting Of Existing Rcc, Steel Or Masonry, Provision Of Structural Steel Connections And Complete Reinstatement Of All Disturbed Surfaces, Together With All Cabling, Earthing, Protection, Making-Good, Cleaning And Any Dismantling/Re-Installation Without Disturbing Adjoining Works., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A3/4. Entry Portal Sign, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Wherever The Authority Requires, The Contractor Shall Produce Detailed Shop Drawings And Support Details Based On The Consultant’S Design And Secure Approval Prior To Fabrication And Installation. The Work Includes Approximately 75 Mm Deep Stainless-Steel Channel Letters In Matte Finish, Halo-Lit Using Rear-Mounted White Leds With Suitable Diffusers, Fixed To The Entry Portal Using Metal Spacers (Around 20 Mm) And Concealed Anchors Into Rcc/Steel, Including Drilling, Chemical Anchors Where Required And Making Good. The National Emblem Shall Be Die-Cast Aluminium, Pu Coated And Fixed On The Portal. A P4 Outdoor Led Display Around 8000×600 Mm Or Equivalent Shall Be Supplied And Integrated, Including Cabinet, Mounting Frame, Drainage/Ventilation, Access For Maintenance, Controllers And Data Interfaces. The Contractor Shall Verify All Dimensions On Site, Design Supports, Perform Any Rcc/Steel Modification Needed And Carry Out All Breaking/Cutting And Reinstatement Of Concrete, Masonry, Finishes And Claddings Associated With Fixings And Cable Routing. All Electrical Wiring, Earthing, Surge Protection, Testing, Commissioning, Cleaning And Careful Dismantling/Re-Fixing If Required Shall Be Included, Ensuring No Damage To The Portal Structure And Finishes., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A5. Entry / Exit + Gate Id Sign, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Where Considered Necessary By The Engineer/Authority, The Contractor Shall Prepare And Obtain Approval For Shop Drawings Derived From The Consultant’S Design, Incorporating Any Required Detailing Changes. The Sign Shall Consist Of 50 Mm Deep Aluminium Channel Letters With Side Faces Pu Painted, And Front Faces Formed By 5 Mm Border/Frame Supporting 5 Mm Day/Night Acrylic, Internally Illuminated With High-Efficiency White Leds And Suitable Drivers Housed In Accessible Locations. All Letters Shall Be Mounted To The Wall Or Gate Structure Using Pin-And-Screw Method Or Equivalent Concealed Fixings, Including Drilling And Cutting Into Rcc/Masonry/Steel, Provision Of Corrosion-Protected Anchors And Brackets, Sealing Of Penetrations And Full Restoration Of Disturbed Plaster, Cladding Or Paint Finishes. The Contractor’S Scope Includes Any Minor Structural Brackets, Cable Containment, Frls Wiring From Power Point, Junction Boxes, Earthing, Functional Testing, Aiming, Cleaning, Protection During Works And Careful Dismantling/Re-Installation If Required, Ensuring That Existing Architectural And Structural Elements Are Not Damaged Or Adversely Affected., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A6.1 Visitor Entry Sign, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Shop/Fabrication Drawings Shall Be Developed And Submitted For Approval Wherever The Engineer/Authority Requires Further Detailing Or Changes Over The Consultant’S Drawings. The Sign Shall Comprise A Custom Aluminium Profile Box From Minimum 2 Mm Sheet With Pu Paint Finish, Clad Over An Internal Gi Framework. Content Shall Include 50 Mm Deep Aluminium Channel Letters With 5 Mm Front Rim Holding 4 Mm Acrylic Faces, Internally Illuminated With White Leds And Suitable Drivers, Plus Laser-Cut Content Elements Backed With Acrylic Projecting Approximately 5 Mm And Internally Lit. Pattern Panels Shall Be 2 Mm Pu Painted Aluminium With 4 Mm Acrylic Backing And Translucent Vinyl Or Equivalent, Internally Led Lit. Work Includes All Supports, Brackets, Rcc/Steel Anchors, Any Necessary Breaking/Cutting Of Walls, Soffits Or Claddings And Complete Restoration Of All Such Surfaces, Frls Wiring, Junction Boxes, Earthing, Testing, Cleaning, Protection And Any Careful Dismantling/Re-Installation Needed., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A6.2 Visitor Pass Counter Sign, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Where Modifications Or Further Detailing Are Required By The Engineer/Authority, The Contractor Shall Prepare Artwork Layouts And Shop Drawings Derived From The Consultant’S Design And Obtain Approval. The Sign Shall Comprise Uv-Printed Vinyl Artwork Or Equivalent High-Performance Film Applied To Glazing From The Rear (Reverse Pasted) To The Approved Layout, With Suitable Protective Lamination Where Required For Cleaning Durability. The Contractor Shall Verify Glass Sizes And Conditions On Site, Prepare And Clean Substrates, And Install Graphics Free Of Bubbles, Creases And Misalignment. Any Minor Framing Or Fixing Accessories Needed To Complete The Visual Composition Using Aluminium Profiles And Panels Over Gi Framing Shall Be Included. Scope Covers Design Verification, Development Of Artwork Panels, Careful Handling Of Glass, Protection Of Adjacent Surfaces, Any Local Breaking/Removal Of Trims, Sealant Or Finishes Needed For Access And Their Full Restoration, Cleaning And Restoration Of Disturbed Finishes, Together With Any Associated Electrical Work Or Lighting Adjustments Indicated On Drawings., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A6.3 Counter Number Sign, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. If The Engineer/Authority Requires, The Contractor Shall Prepare Detail/Shop Drawings Or Artwork Layouts Based On The Consultant’S Design For Approval. Counter Numbers Shall Be Executed As Approved-Colour Vinyl Or Equivalent High-Performance Plotter-Cut Films, Reverse Applied To Glass Or Glazing Panels, With Clear, Legible Typography Sized For The Specified Viewing Distance. The Contractor Shall Verify Glass Panel Dimensions, Prepare The Surface Thoroughly, Position Templates, And Apply Films To Achieve Clean Edges Without Air Pockets Or Wrinkles. Where Integrated With Aluminium Profile Boxes Or Gi Framed Panels Behind The Glazing, All Such Supports, Pu Painted Aluminium Panels And Associated Detailing Shall Be Included, Together With Any Temporary Removal And Reinstatement Of Beads, Trims, Sealants Or Adjacent Finishes Necessary For Installation. Scope Includes Cleaning Of Glass And Adjacent Finishes, Protection During Works, And Any Related Electrical Or Lighting Coordination Needed To Maintain Legibility And Visual Consistency At The Counters., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A6.4 Verification Counter Signage, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Where The Engineer/Authority Considers It Necessary, The Contractor Shall Develop And Submit Shop/Fabrication Drawings And Artwork Layouts Based On The Consultant’S Design For Approval, Incorporating Any Changes. Signage Shall Primarily Comprise Uv-Printed Vinyl Artwork Or Equivalent Applied To Glazing From The Back, Giving Clear Identification Of Verification Counters, Coordinated With The Overall Visitor Entry Family. Where Required, A Custom Aluminium Profile Box From Minimum 2 Mm Sheet With Pu Paint Finish, Clad Onto An Internal Gi Framework, Shall Be Used As A Backing Or Header Element, Integrating Laser-Cut Or Acrylic-Backed Content And Internal Led Lighting To Match The Main A6.1 Treatment. All Fixings To Glazing, Rcc, Masonry Or Steel Shall Use Appropriate Anchors, Tapes And Sealants, With Any Breaking, Cutting Or Chasing Of Substrates And Complete Reinstatement Of Finishes Included. Scope Covers Design Verification, Substrate Preparation, Careful Application, Protection Of Adjacent Work, Cleaning, And Any Dismantling/Re-Installation Necessary, Along With Associated Electrical Cabling, Earthing And Testing., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A7. Visitor Pass Information Signage, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Detailed Shop/Fabrication Drawings And Artwork Layouts Shall Be Prepared And Approved Wherever Required By The Engineer/Authority, Based On The Consultant’S Design. The Sign Shall Consist Of A Custom Aluminium Profile Box Fabricated From Minimum 2 Mm Sheet, Pu Painted, With 2 Mm Pu-Coated Aluminium Face Panels Clad Onto An Internal Gi Structural Framework. All Content Elements Shall Be High-Resolution Uv-Printed Artwork On Suitable Media, Laminated With Scratch-Resistant Clear Vinyl Or Equivalent For Easy Maintenance. Signs Shall Be Wall-Mounted Or Counter-Mounted Using Concealed Brackets And Anchors Compatible With Rcc, Masonry, Steel Or Glazing Substrates As Applicable, Including Any Drilling, Breaking And Reinstatement Of Plaster, Tile, Stone Or Cladding Finishes Associated With Fixing And Cable Routing. The Contractor’S Scope Includes Design Verification, Development Of Artwork And Panel Layouts, Shop/Fabrication Drawings, Safe Handling, Protection, Cleaning, Any Necessary Dismantling/Re-Fixing And All Associated Electrical Or Lighting Provisions Indicated To Ensure Good Visibility., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A10. Parking Zone Identification Sign, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Applicable Traffic Standards, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Where Demanded By The Engineer/Authority, The Contractor Shall Prepare Shop/Fabrication Drawings And Layout Details Based On The Consultant’S Design And Obtain Approval Before Execution. The Main Sign Shall Be An Aluminium Panel Box From Minimum 2 Mm Sheet With Internal Gi Framework, Pu Painted, With Laser-Cut Content Backed By 5 Mm Day/Night Acrylic And Internally Illuminated Using White Leds And Suitable Drivers. Mandatory Traffic Icons Shall Be Formed Using 5 Mm Acrylic Backing And Translucent Vinyl Or Equivalent, Internally Led Lit. An Orange Strip And Other Colour Bands Shall Be Pu Finished To Approved Textures. Height-Barrier Assemblies Shall Use Gi Rhs Sections (Approx. 100×50 Mm), Pu Painted, With Retro-Reflective Vinyl Strips Cut To Artwork. The Item Includes All Foundations, Base Plates, Anchors, Any Breaking/Cutting Of Slabs, Curbs Or Masonry For Posts, Conduits And Anchors, Required Rcc Works And Complete Restoration Of Floors, Pavements And Finishes, As Well As All Electrical Cabling, Earthing, Protection, Testing, Cleaning And Careful Dismantling/Re-Installation Where Required., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A11. Direction Finger Post Sign, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Wherever The Engineer/Authority So Instructs, The Contractor Shall Develop And Submit Shop/Fabrication Drawings, Foundation Details And Structural Calculations Based On The Consultant’S Design For Approval. Finger Boards Shall Be Custom Aluminium Boxes From Minimum 2 Mm Sheet, Pu Painted, With Cnc-Cut Aluminium Profiles Clad Onto Internal Gi Framework. Content Options Include Laser-Cut Openings Backed With 5 Mm Day-Night Acrylic (Smoke Grey) Or Acrylic Projecting About 5 Mm, Internally Illuminated With White Leds And Drivers. Pattern Panels Shall Be 2 Mm Aluminium With 4 Mm Acrylic Backing And Translucent Vinyl Or Equivalent, Led Lit At Warmer Colour Temperature. The Main Support Pole Shall Be Gi Shs 200×200×12 Mm With Welded Base Plate And Anchor Bolts, Pu Painted, On Rcc Foundation As Designed By The Contractor. A 2 Mm Aluminium Qr Code Plate With Uv Printing Shall Be Fixed To The Pole. Work Includes Foundations, Structural Steel, Any Breaking/Cutting Of Existing Pavements Or Slabs For Foundations And Conduits With Full Reinstatement, Cable Routing, Earthing, Testing, Cleaning, And Careful Dismantling/Re-Installation If Required., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A12. Direction Sign Pylon – Type A, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Structural Requirements, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Contractor Shall Prepare And Submit Shop/Fabrication Drawings, Structural Details And Foundation Drawings For Approval Whenever Required By The Engineer/Authority, Based On The Consultant’S Design. The Pylon Shall Be A Custom Aluminium Box From Minimum 2 Mm Sheet With Cnc-Cut Panels, Pu Painted And Clad Onto A Gi Structural Framework Designed For Wind And Impact Loads. A Charkha Feature In Approx. 8 Mm Acrylic With Hairline-Finish Stainless-Steel Overlay Or Equivalent Shall Project From The Surface And Be Side Edge Lit With Internal Leds. Content May Be Laser Cut And Backed With 5 Mm Day-Night Acrylic Or Allowed To Project 5 Mm, Internally Led Lit. Pattern Zones Shall Use 2 Mm Aluminium With 4 Mm Acrylic Backing And Translucent Vinyl Or Equivalent, Internally Lit At Warmer Led Colour Temperature. Bottom Skirting Shall Be 2 Mm Pu Painted Aluminium. Work Includes Rcc Foundations, Base Plates, Anchors, Any Breaking/Cutting Of Existing Pavements, Curbs Or Slabs For Foundations And Cable Trenches And Full Reinstatement, Cable Routing, Earthing, Testing, Cleaning, And Any Careful Dismantling/Re-Fixing Without Disturbing Adjacent Landscape Or Structures., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A13. Direction Sign Pylon – Type B, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Structural Requirements, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Wherever The Engineer/Authority Requires, The Contractor Shall Prepare Shop/Fabrication Drawings And Structural/Foundation Details Derived From The Consultant’S Design And Secure Approval Before Fabrication. The Pylon Shall Comprise A Custom Aluminium Profile Box From Minimum 2 Mm Sheet With Cnc-Cut Panels, Pu Painted And Clad Onto An Internal Gi Structural Framework Designed For Wind And Impact Loads. A Charkha Feature In Approx. 8 Mm Acrylic With Hairline-Finish Stainless-Steel Overlay Or Equivalent Shall Project From The Surface And Be Side Edge Lit With Internal Leds. Directional Content Shall Be Laser Cut And Either Backed With 5 Mm Day-Night Acrylic Or Allowed To Project 5 Mm, Internally Illuminated With White Leds. Pattern Panels In 2 Mm Aluminium With 4 Mm Acrylic Backing And Translucent Vinyl Or Equivalent Shall Be Internally Lit With Warmer Leds. Bottom Skirting Shall Be 2 Mm Pu Painted Aluminium. The Item Includes Rcc Foundations, Base Plates, Anchors, Any Necessary Breaking, Cutting Or Removal Of Existing Pavements/Structures For Foundations And Conduits And Full Restoration Of All Disturbed Finishes, Cable Routing, Earthing, Testing, Cleaning, And Careful Dismantling/Re-Fixing If Required., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A14. Direction Sign Pylon – Type C, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Relevant Standards, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Shop/Fabrication And Structural Drawings Shall Be Prepared And Submitted For Approval Whenever Required By The Engineer/Authority, Based On The Consultant’S Design. The Pylon Shall Be A Custom Box From Minimum 2 Mm Pu-Painted Aluminium Sheet With Cnc-Cut Profiles, Clad Over An Internal Gi Structural Framework Engineered For External Loads. Content Shall Be Laser Cut And Either Backed With 5 Mm Day-Night Acrylic (Smoke Grey) Or Allowed To Project 5 Mm, Internally Illuminated With White Leds. A “No Entry” Symbol Shall Be Formed From Acrylic With Translucent Vinyl Or Equivalent, Internally Led Lit. Bottom Skirting Shall Be From 2 Mm Aluminium With Pu Finish. The Contractor Shall Provide All Rcc Foundations, Steel Base Plates, Anchor Bolts And Interface Detailing, Including Excavation, Concreting, Grouting And Any Necessary Breaking And Reinstatement Of Pavements, Kerbs Or Slabs. All Electrical Wiring, Junction Boxes, Earthing, Testing, Cleaning, Surface Breaking And Restoration, And Any Careful Dismantling/Re-Installation Required Are Included., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A15. Direction Sign Pylon + Interactive Map, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Contractor Shall Produce And Obtain Approval For Shop/Fabrication, Structural And Integration Drawings Whenever Required By The Engineer/Authority, Based On The Consultant’S Design. The Pylon Shall Be A Custom Pu-Painted Aluminium Box From Minimum 2 Mm Sheet With Cnc-Cut Profiles On A Gi Frame. Charkha Detail Shall Use Approx. 8 Mm Acrylic With Hairline-Finish Stainless-Steel Overlay Or Equivalent, Side Edge Lit With Leds. Content Shall Be Laser Cut And Backed With Or Projecting From 5 Mm Day-Night Acrylic, Internally Led Lit. The Unit Shall Integrate An Outdoor-Grade Interactive Led Touch Screen (Approx. 32) With Controller, Accessibility Touch-To-Audio Feature And Braille Signage. Mandatory Pictograms Shall Use Long-Life Reflective Vinyl. Pattern Panels Shall Be 2 Mm Aluminium With Acrylic Backing And Translucent Vinyl Or Equivalent, Internally Lit. Item Includes Foundations, Steelwork, Anchors, Any Breaking/Cutting Of Existing Surfaces For Foundations, Power And Data Routes And Complete Reinstatement, Power And Data Cabling, Earthing, Surge Protection, Testing, Cleaning, Careful Dismantling/Re-Fixing And Restoration Of Surrounding Finishes., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A16. Direction Sign Pylon + Map Sign (Static), Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Whenever Required By The Engineer/Authority, The Contractor Shall Prepare Shop/Fabrication Drawings, Foundation Details And Graphic Layouts Based On The Consultant’S Design And Obtain Approval. Pylon Construction Shall Comprise A Custom Aluminium Box From Minimum 2 Mm Sheet With Cnc-Cut Profiles, Pu Painted And Fixed Over A Gi Structural Frame With Suitable Rcc Foundations, Base Plates And Anchors. Content, Information And Map Graphics Shall Be Uv-Printed On Pu-Coated Aluminium Panels And Protected With Scratch-Resistant Lamination, Incorporating Accessibility Touch-To-Audio And Braille Elements. Mandatory Pictograms Shall Be Reflective Vinyl Of Long Life. Pattern Zones Shall Be 2 Mm Aluminium With 4 Mm Acrylic Backing And Translucent Vinyl Or Equivalent, Internally Illuminated With Warm-White Leds. Bottom Skirting Shall Be 2 Mm Pu-Painted Aluminium. All Civil Works (Excavation, Concreting, Backfilling), Structural Steel, Any Breaking/Cutting Of Existing Pavements, Kerbs Or Slabs And Full Reinstatement, Cabling, Earthing, Testing, Cleaning, Surface Breaking And Reinstatement, And Any Careful Dismantling/Re-Installation Are Included., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A17. Mandatory Sign, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Applicable Traffic Standards, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Shop/Fabrication Drawings And Foundation Details Shall Be Prepared And Submitted For Approval Whenever Required By The Engineer/Authority On The Basis Of The Consultant’S Design. The Sign Shall Consist Of A Custom Aluminium Box Panel From Minimum 2 Mm Sheet, Pu Painted, Clad Over An Internal Gi Frame With Base Plate And Anchor-Bolt Assembly On Rcc Foundation Or Structural Supports As Required. A Circular Speed-Limit Cutout With Approx. 10 Mm Front Rim Shall Hold A 2 Mm Aluminium Panel, Pu Finished To Artwork. Speed-Limit Numerals Shall Be Black Reflective Vinyl, And Other Mandatory Symbols Shall Be Retro-Reflective Vinyl In Specified Colours, All Plotter-Cut From Approved Or Equivalent Films With Minimum 10-Year Performance. Work Includes All Foundation Works, Steel Base Plates, Anchors, Any Breaking/Cutting Of Roads, Shoulders Or Pavements For Foundations And Conduits And Complete Restoration Of Surfacing And Markings, As Well As Installation, Alignment, Cleaning And Any Careful Dismantling/Re-Fixing, Together With Electrical Works Where Lighting Is Specified., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A19. Campus Directory Sign, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Accessibility Norms, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Wherever The Engineer/Authority Considers It Necessary, The Contractor Shall Prepare And Obtain Approval For Shop/Fabrication Drawings, Structural Details And Graphic Layouts Based On The Consultant’S Design. The Sign Shall Be A Custom Aluminium Profile Box From Minimum 2 Mm Sheet, Pu Painted And Clad To A Gi Structural Framework. Charkha And Sardar Bhavan/Sachivalaya Letters Shall Be Approx. 10 Mm Acrylic With Matte Stainless-Steel Or Equivalent Overlay, Side Edge Lit With Internal Leds. Information And Maps Shall Be Uv-Printed On Pu-Coated Aluminium Panels, Protected With Scratch-Resistant Lamination, Incorporating Accessibility Touch-To-Audio And Braille Signage. An External Canopy-Mounted Light Source Shall Provide Night Visibility. Pattern Panels Shall Be 2 Mm Aluminium With 4 Mm Acrylic Backing And Translucent Vinyl Or Equivalent, Internally Lit With Warm Leds; Bottom Skirting Shall Be 3 Mm Pu-Painted Aluminium. The Item Includes Rcc Foundations, Structural Steel, Anchors, Any Breaking/Cutting Of Pavements/Landscape For Foundations And Cables And Complete Restoration, All Wiring And Earthing, Testing, Cleaning, And Careful Dismantling/Re-Installation If Needed., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A20. Block Directory Pylon, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Structural Design Requirements, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Where Required By The Engineer/Authority, The Contractor Shall Submit Shop/Fabrication And Structural Drawings Based On The Consultant’S Design For Approval Before Fabrication. The Pylon Shall Be A Custom Aluminium Box From Minimum 2 Mm Sheet With Cnc-Cut Profiles, Pu Painted, Clad Onto A Gi Framework On Rcc Foundation With Base Plates And Anchor Bolts. A Charkha Feature In Approx. 8 Mm Acrylic With 2 Mm Pu-Painted Aluminium Front Plate Shall Be Side Edge Lit Using Leds. Block Number Shall Be 50 Mm Deep Aluminium Channel Letters From 2 Mm Sheet, With Approx. 6 Mm Front Rim Securing 4 Mm Acrylic Faces, Internally Led Lit. Content May Be Laser Cut And Backed With Or Projecting From 5 Mm Day-Night Acrylic, Internally Illuminated With Leds. Pattern Areas Shall Use Custom Ceramic Mosaic Tiles On 2 Mm Aluminium Backing. Bottom Skirting Shall Be 2 Mm Pu-Painted Aluminium. All Associated Civil Works, Structural Steel, Any Breaking/Cutting Of Existing Pavements, Plinths Or Slabs And Full Reinstatement, Wiring, Earthing, Testing, Cleaning, Surface Breaking And Restoration, And Careful Dismantling/Re-Fixing Are Included., Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning A21. Movable Sign, Complete In All Respects As Per Design Consultant’S Designs And Gfc Drawings, Functional Requirements, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Where Demanded By The Engineer/Authority, The Contractor Shall Prepare And Obtain Approval For Shop/Fabrication Drawings And Base Details Based On The Consultant’S Design. The Unit Shall Comprise A Custom Aluminium Box Panel From Minimum 2 Mm Sheet, Pu Painted, Clad Over An Internal Gi Frame With Base Plate And Anchor Arrangement, Designed For Stability Yet Allowing Relocation When Required. Content Shall Be Retro-Reflective Vinyl, Plotter-Cut In Approved Colours From Long-Life Film Or Equivalent. The Support Pole Shall Be Gi Circular Tube Sized Per Artwork, Pu Painted, Fixed To A Gi Shs Base Frame Of Specified Size, Also Pu Painted. Where Cast-In Or Bolted Foundations Or Pads Are Required, Rcc Works, Anchors, Grouting And Any Breaking/Cutting And Reinstatement Of Pavements Or Plinths Shall Be Included. Scope Covers Fabrication, All Structural Steel, Fixing Accessories, Electrical Works If Any Lighting Is Specified, Careful Handling During Installation And Future Movement, Cleaning And Making Good Of Any Disturbed Surfaces., Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning B1. Floor Identification Sign, Including All Materials, Labour, Equipment And Incidentals, Complete In All Respects As Per Designs, Intent Drawings And Gfc Drawings Issued By The Design Consultant, The Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. All Visual Designs, Artwork, Typography, Colours And Sizes Shall Be Provided By The Design Consultant; The Contractor Shall Not Alter Them And Shall Only Prepare Shop/Fabrication Drawings If And When Required By The Engineer/Authority, Based On The Consultant’S Design And Submitted For Approval Before Fabrication. The Sign Shall Consist Of A Custom Or Modular Aluminium Profile Frame With Approximately 2.5 Mm Front Rim, Fabricated From Minimum 2 Mm Thick Aluminium, Thoroughly Cleaned, Pre-Treated And Finished With Factory-Applied Pu Paint In The Approved Shade And Sheen. The Face Panel Shall Be 2 Mm Thick Aluminium Fixed Within The Profile And Carrying Uv-Printed Textured Artwork Strictly As Per Approved Graphics, With Protective Clear Coat Where Specified. The Floor Numeral Shall Be A 3 Mm Thick Laser-Cut Acrylic Character, Pu Painted In Approved Colour, Accurately Aligned And Securely Bonded To The Panel Using High-Bond Adhesive And/Or Concealed Pins. The Assembly Shall Be Wall Mounted At The Heights And Locations Shown On The Consultant’S Drawings Using Concealed Mechanical Fixtures Suitable For The Substrate (Rcc, Masonry, Gypsum Board Or Cladding), Including All Setting Out, Drilling, Anchors, Screws, Plugs And Local Support Plates As Necessary. The Item Rate Shall Be Deemed To Include All Fixing Operations And Consequences, Namely Breaking, Cutting Or Drilling Of Rcc, Steel, Structural Steel, Masonry Or Finishes Wherever Required For Anchors Or Concealed Brackets, And Complete Restoration And Making Good Of All Disturbed Surfaces (Plaster, Paint, Cladding, Skirting, Sealant) To Match Existing Or Better, With No Separate Payment. The Scope Also Includes Surface Preparation, Cleaning Of Residues, Protection Of Adjacent Work, Removal Of Debris And Any Related Electrical Integration Shown On Drawings (Such As Provision For Lighting Or Conduits) Including Cabling, Terminations And Testing.?, Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning B2. Lift Jamb Sign – Floor Id, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Applicable Accessibility Requirements, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Design Consultant Will Provide All Artwork, Symbols, Fonts And Braille Layouts, And The Contractor Shall Prepare Shop/Fabrication Drawings Only If Instructed By The Engineer/Authority, Strictly Based On These Designs And Submitted For Approval Before Fabrication. The Sign Shall Be Formed From Minimum 2 Mm Thick Aluminium Plate Cut To The Specified Size, Edges Rounded And Finished Neat, And All Faces Pre-Treated And Pu Coated In The Approved Colour And Sheen. Floor Number, Text And Braille, Where Required, Shall Be Executed By Direct Uv Printing, Raised Printing And/Or Tactile Elements As Specified, With Adequate Contrast And Legibility In Accordance With Accessibility Norms. The Plate Shall Be Fixed To The Lift Jamb At The Specified Height Using High-Strength Industrial Adhesive And, Where Required, Concealed Mechanical Fasteners Compatible With The Jamb Substrate. All Fixing Operations, Including Any Necessary Breaking, Cutting Or Drilling Of Rcc, Steel, Structural Steel, Masonry Or Cladding, And Full Restoration Of Disturbed Finishes To Uniform Line, Level And Shade, Shall Be Considered Included In The Rate. Scope Includes Substrate Inspection And Preparation, Cleaning, Dust Removal, Precise Alignment, Temporary Supports, Protection Of Adjacent Finishes, Removal Of Surplus Adhesive, Final Cleaning And Any Dismantling/Re-Fixing That May Be Required During Coordination With Lift Installations Or Other Services.?, Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning B3. Lift Id Sign, Complete As Per Designs, Intent Drawings And Gfc Drawings Issued By The Design Consultant, The Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. All Aspects Of Design, Including Typeface, Letter Size, Colour And Positioning, Shall Be Provided By The Design Consultant; The Contractor Shall Only Develop Shop/Fabrication Drawings When Required By The Engineer/Authority And Shall Obtain Approval Before Fabrication. The Signage Shall Comprise Individual Letters Or Numerals Cut From 10 Mm Thick Aluminium, With All Edges Machined Or Ground Smooth And Slightly Eased, And All Visible Surfaces Pre-Treated And Finished With An Approved Pu Paint System In The Specified Colour And Sheen. Characters Shall Be Set Out, Spaced And Aligned Strictly As Per Drawings And Fixed To The Designated Surface Using Concealed Mechanical Fixtures And/Or Approved Structural Adhesives, Selected To Suit The Substrate And To Resist Vibration And Handling. The Rate Shall Be Inclusive Of All Fixing Operations Including Setting Out, Drilling, Tapping, Insertion Of Plugs Or Anchors, Any Breaking Or Cutting Of Rcc, Steel, Structural Steel, Masonry Or Cladding Required To Introduce Fixings, And Complete Making Good And Restoration Of All Disturbed Surfaces. Protection Of Adjacent Finishes, Removal Of Temporary Supports, Final Cleaning And Disposal Of Debris Are Also Included, Together With Any Specified Electrical Features Such As Back-Lighting Or Halo-Lighting, And All Related Cabling, Terminations, Testing And Commissioning.?, Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning B4. Floor Id Sign + Department Id Sign For Lift Lobbies And Key Junctions, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Design Consultant Will Provide Full Visual Designs And Layouts; The Contractor Shall Prepare And Submit Shop/Fabrication Drawings Only If The Engineer/Authority Requires, Reflecting The Consultant’S Design Without Alteration. The Sign Shall Be A Custom Or Modular Aluminium Profile Box With Minimum 2 Mm Thick Aluminium And Approximately 12 Mm Front Rim, Pre-Treated And Pu Painted To The Approved Finish. The Background Shall Be A 2 Mm Aluminium Panel Fixed Within The Profile And Carrying Uv-Printed Textured Artwork As Per Approved Graphics. Floor Number Shall Be Rendered In 8 Mm Thick Laser-Cut Acrylic And The Department Name In 3 Mm Thick Laser-Cut Acrylic; Both Shall Be Pu Painted In Approved Colours And Securely Bonded To The Background With High-Bond Adhesive And/Or Concealed Pins To Give A Crisp Raised Effect. The Complete Assembly Shall Be Wall Mounted Using Concealed Mechanical Fixings Suitable For The Substrate, Including Brackets, Screws, Anchors And Backer Plates Where Needed. All Fixing Operations, Including Any Breaking, Cutting Or Drilling Of Rcc, Steel, Structural Steel Or Masonry To Install Fixings Or Concealed Supports And Full Restoration Of Disturbed Finishes To Original Condition Or Better, Shall Be Deemed Included In This Item. Scope Also Includes Setting Out, Alignment, Protection Of Adjacent Work, Cleaning And Disposal Of Debris And Any Electrical Provision Indicated On Drawings, Such As Raceways, Junction Boxes Or Illumination, With All Related Wiring And Testing.?, Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning B5. Department Id Sign, Complete In All Respects As Per Designs, Intent Drawings And Gfc Drawings Issued By The Design Consultant, The Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Consultant Will Supply All Design Inputs; The Contractor Shall Only Develop Shop/Fabrication Drawings Where The Engineer/Authority Feels Necessary And Must Obtain Approval Before Fabrication, Incorporating Any Changes Instructed. The Sign Shall Use A Custom Or Modular Aluminium Profile Frame With Approximately 2.5 Mm Front Rim, Fabricated From Minimum 2 Mm Thick Aluminium, Cleaned And Pre-Treated, And Finished With Pu Paint In The Approved Colour And Sheen. A 2 Mm Thick Aluminium Background Panel With Uv-Printed Textured Artwork Shall Be Accurately Fitted Within The Profile. The Department Name Shall Be Formed With 3 Mm Thick Laser-Cut Acrylic Letters, Pu Painted And Fixed To The Background Using High-Bond Adhesive And/Or Concealed Studs. Signs Shall Be Wall Mounted Using Concealed Mechanical Fixings Appropriate To The Substrate, Including All Drilling, Anchors, Brackets And Any Local Stiffeners. The Item Rate Includes All Fixing And Associated Works: Breaking, Cutting Or Drilling Of Rcc, Steel, Structural Steel, Masonry Or Claddings Wherever Required; Sealing Of Penetrations; And Complete Making Good And Restoration Of Affected Surfaces, With No Separate Claim. Also Included Are Setting Out, Alignment, Protection Of Adjacent Works, Final Cleaning And Any Electrical Features Shown In Drawings, Together With The Necessary Wiring And Testing.?, Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning B6. Room Id Sign, Complete In All Respects As Per Designs, Intent Drawings And Gfc Drawings Issued By The Design Consultant, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. All Design Aspects Including Layout Of Cabin Number And Name Strips Will Be By The Design Consultant; The Contractor Shall Submit Shop/Fabrication Drawings Only Where The Engineer/Authority Requires And Shall Obtain Approval Prior To Fabrication. The Sign Shall Comprise A Custom Or Modular Aluminium Profile Fabricated To The Approved Size, With Approximate 2.5 Mm Front Rim, Pre-Treated And Factory Finished With Pu Paint Over Suitable Primer. It Shall Include A 2 Mm Thick Aluminium Cabin Number Panel, Pu Coated, Carrying A 3 Mm Thick Laser-Cut Acrylic Cabin Number With Black Matte Pu Finish, And A 2 Mm Aluminium Name Panel With Uv-Printed Background Vinyl And Printed Content, All Accurately Aligned And Securely Fixed Using 3M Vhb Tape And/Or Concealed Mechanical Fasteners. Signs Shall Be Mounted On Walls Or Doors Using Self-Tapping Screws, High-Bond Tapes Or Other Approved Fixtures, Including All Drilling, Anchors, Substrate Preparation, Sealing Of Any Penetrations, And Complete Making Good Of Disturbed Surfaces Such As Paint, Laminate Or Veneer. All Fixing, Including Any Minor Breaking Of Rcc, Steel, Structural Steel Or Masonry To Introduce Anchors Or Conduits, Together With Full Restoration, Is Deemed Included. Scope Also Includes Design Verification, Completion Of Fixing Details, Shop Drawings When Required, Careful Handling, Protection Of Adjacent Works, Cleaning And Any Dismantling/Re-Fixing Necessary For Coordination With Door Hardware Or Services, Including Any Related Electrical Work Where Applicable.?, Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning B7. Washroom Signs – Door/Wall Mounted, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Consultant Will Provide All Graphic Symbols, Gender Icons And Layouts; The Contractor Shall Develop Shop/Fabrication Drawings Only If Required By The Engineer/Authority And Must Obtain Approval Before Fabrication. Each Sign Shall Be A Custom Or Modular Aluminium Profile Box With Approximately 10 Mm Front Rim To The Approved Size, Fabricated From Minimum 2 Mm Aluminium Sections, Pre-Treated And Pu Painted. The Background Shall Be A 2 Mm Aluminium Panel Fixed Within The Profile, Carrying Uv-Printed Textured Artwork As Per Approved Graphics. Content Icons And Any Text Shall Be 3 Mm Thick Laser-Cut Acrylic, Pu Painted In Approved Colours And Securely Bonded Using 3M Vhb Tape Or Equivalent Adhesive. Signs Shall Be Mounted On Toilet Doors Or Adjacent Walls At Standard Heights Using 3M Vhb Tape And/Or Suitable Mechanical Fixtures, With All Substrate Preparation, Drilling, Anchors, Sealing, Alignment And Full Restoration Of Disturbed Finishes Included. All Fixing, Including Any Necessary Breaking Or Cutting Of Rcc, Steel, Structural Steel Or Masonry And Restoring The Surfaces, Is Comprehensively Covered Within The Item Rate. Scope Further Includes Design Verification, Fixing-Detail Development, Shop Drawings When Required, Careful Handling, Protection, Cleaning And Any Dismantling/Re-Fixing, Together With Associated Electrical Work Where Illumination Is Specified.?, Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning B8. Washroom Blade Signs, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. All Iconography, Text And Layouts Shall Be As Designed By The Consultant; The Contractor Shall Prepare Shop/Fabrication Drawings Only Where The Engineer/Authority Requires And Shall Obtain Approval Before Fabrication. Signs Shall Be Custom Or Modular Aluminium Profile Boxes With Approximately 10 Mm Front Rim, Fabricated From Minimum 2 Mm Aluminium, Pre-Treated And Pu Painted. Each Blade Shall Incorporate A 2 Mm Aluminium Background Panel With Uv-Printed Textured Artwork As Per Approved Graphics And 3 Mm Laser-Cut Acrylic Icons/Text, Pu Painted And Fixed With 3M Vhb Tape Or Suitable Adhesive. The Assembly Shall Be Fixed Perpendicular To Walls Using Custom Or Modular Aluminium Brackets With Mechanical Fixtures Designed To Support The Sign Weight, Resist Vibration And Accidental Impact, And Maintain Clear Headroom And Visibility From Both Directions. The Rate Includes All Drilling, Anchors, Local Steel Plates If Needed, And Any Breaking Or Cutting Of Rcc, Steel, Structural Steel Or Masonry Required For Fixing, Together With Complete Restoration Of Disturbed Finishes. Scope Also Includes Design Verification, Fixing/Detail Design, Shop Drawings When Required, Surface Preparation, Protection Of Adjacent Work, Cleaning And Any Electrical Integration Indicated On Drawings.?, Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning B9. Amenity Sign – Wall Mounted, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Consultant Will Define Amenity Names, Artwork And Layouts; The Contractor Shall Only Provide Shop/Fabrication Drawings When The Engineer/Authority Requires And Shall Obtain Approval Before Manufacture. The Sign Shall Use A Custom Or Modular Aluminium Profile Frame With Approximately 2.5 Mm Front Rim, Fabricated From Minimum 2 Mm Aluminium And Finished With Pu Paint. Within This Frame, A 2 Mm Aluminium Cabin Number Panel, Pu Coated, Shall Be Provided Along With A 3 Mm Thick Laser-Cut Acrylic Cabin Number With Matte Pu Finish And A 2 Mm Aluminium Name Panel With Uv-Printed Background Vinyl And Printed Amenity Content. All Components Shall Be Accurately Aligned And Fixed Using 3M Vhb Tape And/Or Concealed Fasteners. Signs Shall Be Mounted On Walls At Standard Heights Using Self-Tapping Screws, High-Bond Tapes Or Other Suitable Fixtures. All Fixing, Including All Setting Out, Drilling, Anchors, Any Breaking, Cutting Or Drilling Of Rcc, Steel, Structural Steel Or Masonry That May Be Required And Full Reinstatement Of Disturbed Finishes, Is Included In The Scope. Design Verification, Fixing/Detail Design, Shop Drawings When Needed, Protection Of Adjacent Works, Cleaning, Any Dismantling/Re-Fixing And Associated Electrical Work Where Indicated Are Also Included.?, Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning B10. Interior Directional Sign, Complete In All Respects As Per Wayfinding Designs And Gfc Drawings Issued By The Design Consultant, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Design Consultant Will Provide All Directional Layouts And Content; The Contractor Shall Prepare Shop/Fabrication Drawings Only Where Required By The Engineer/Authority And Shall Secure Approval Before Fabrication. The Sign Shall Be A Custom Or Modular Aluminium Profile Box With Approximately 10 Mm Front Rim, Fabricated From Minimum 2 Mm Aluminium, Pre-Treated And Pu Painted. A 2 Mm Aluminium Background Panel Shall Be Fixed Inside The Profile, Carrying Uv-Printed Textured Artwork And Layout As Per Wayfinding Design. Directional Content And Arrows Shall Be 3 Mm Thick Laser-Cut Acrylic, Pu Painted And Bonded Using 3M Vhb Tape Or Suitable Adhesive. Signs Shall Be Wall Mounted At Specified Heights Using Custom Or Modular Aluminium Brackets And Mechanical Fixtures Suited To The Substrate, With All Drilling, Anchors, Bracketry And Setting Out Included. All Fixing Operations, Including Any Breaking, Cutting Or Drilling Of Rcc, Steel, Structural Steel Or Masonry And Full Restoration Of Disturbed Finishes, Form Part Of This Item. The Scope Covers Design Verification, Fixing/Detail Design, Shop/Fabrication Drawings Where Needed, Careful Handling, Protection, Cleaning, Any Dismantling/Re-Installation And All Electrical Work If Illumination Or Related Connections Are Specified.?, Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning B11. Lift Lobby Directional Blade Sign, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Consultant Shall Supply All Layouts And Content; The Contractor Shall Prepare Shop/Fabrication Drawings Only When Required By The Engineer/Authority And Obtain Approval Before Fabrication. The Blade Shall Be A Custom Or Modular Aluminium Profile Box With Approximately 10 Mm Front Rim, Fabricated From Minimum 2 Mm Aluminium, Pre-Treated And Pu Painted. A 2 Mm Thick Aluminium Background Panel With Uv-Printed Textured Artwork Shall Be Fixed Within The Profile, Carrying Directional Content And Arrows Formed From 3 Mm Thick Laser-Cut Acrylic, Pu Painted And Adhered With 3M Vhb Tape Or Suitable Adhesive. The Sign Shall Be Mounted Projecting From Walls Or Columns At Lift Lobbies Using Custom Or Modular Aluminium Brackets With Robust Mechanical Fixings Designed To Support The Blade And Limit Vibration While Maintaining Required Headroom And Accessibility Clearances. The Rate Includes All Drilling, Anchors, Any Required Breaking Or Cutting Of Rcc, Steel, Structural Steel Or Masonry, And Complete Making Good And Restoration Of All Disturbed Finishes. Careful Handling, Protection, Cleaning And Any Dismantling/Re-Installation Required, Together With Electrical Works For Illuminated Variants Or Related Connections Where Specified, Are Included.?, Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning B13. Campus Directory Sign, Complete In All Respects And In Strict Conformity With Designs, Layouts, Accessibility Intent And Gfc Drawings Issued By The Design Consultant, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. All Visual And Interactive Content, Including Map Layouts, Pictograms And Braille Information, Will Be Provided By The Consultant; The Contractor Shall Only Prepare Shop/Fabrication And Integration Drawings When Instructed By The Engineer/Authority And Obtain Approval Prior To Fabrication. The Sign Shall Comprise A Custom Profile Box Fabricated From Minimum 2 Mm Thick Aluminium Sheet With Internal Gi Framework Sized As Per Consultant Drawings, All Pre-Treated And Pu Painted In Approved Finishes, And Fixed To The Structure Or Foundations With Suitable Anchors And Base Plates. A Base Panel Of 2 Mm Aluminium, Pu Painted, With Internal Gi Frame, Shall Carry 8 Mm Thick Aluminium Letters For Charkha, Sardar Bhavan And Sachivalaya, Pu Painted And Fixed Using Pin-And-Screw Methods. The Directory Shall Incorporate An Interactive Digital Map Using An Approximately 50 Led Smart Touch Screen With Associated Hardware, Integrated Into The Sign Body, Together With Uv-Printed Information Panels On Pu-Coated Aluminium Protected By Scratch-Resistant Lamination, And Accessibility Features Including Touch-To-Audio And Braille Signage. All Supports, Structural Fixings And Brackets, Any Breaking Or Cutting Of Rcc, Steel, Structural Steel Or Masonry Required For Foundations, Conduits Or Anchorages And Complete Restoration Of Disturbed Finishes Are Included In This Item. The Scope Also Includes All Power And Data Wiring Within The Sign, Terminations, Earthing, Ventilation, Access Panels, Testing And Commissioning, As Well As Careful Installation, Protection Of Surroundings, Making Good And Any Dismantling/Re-Work Required Without Disturbing Adjacent Works.?, Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning B14. Level Directory Sign – Static, Complete In All Respects As Per Designs, Gfc Drawings And Directory Layouts Issued By The Design Consultant, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Consultant Will Define All Content, Layout And Sliding-Panel Arrangement; The Contractor Shall Prepare Shop Drawings Only Where Required By The Engineer/Authority And Obtain Approval Before Fabrication. The Sign Shall Comprise A Custom Or Modular Aluminium Profile Frame To The Approved Artwork Size With Approximately 2.5 Mm Front Rim, Fabricated From Minimum 2 Mm Thick Aluminium And Finished With Pu Paint Over Suitable Primer. A 2 Mm Aluminium Base Panel, Pu Painted And Supported On An Internal Gi Framework, Shall Form The Main Face. Directional Arrows Shall Be 3 Mm Laser-Cut Acrylic, Pu Painted And Securely Fixed. Officer-Name Information Shall Be Provided On Custom Aluminium (Or Equivalent) Sliding Profile Panels With 2 Mm Aluminium Inserts And Uv-Printed Vinyl Artwork. The Assembly Shall Be Wall Mounted Using Concealed Mechanical Fixtures Appropriate To The Substrate, With All Drilling, Anchors, Bracketry, And Any Necessary Breaking Or Cutting Of Rcc, Steel, Structural Steel Or Masonry, And Complete Reinstatement Of Disturbed Finishes Included. The Item Also Covers Surface Preparation, Protection Of Adjacent Work, Cleaning, Dismantling/Re-Fixing Where Required And Any Associated Electrical Work Shown On Drawings.?, Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning B16. Floor Directory Sign, Complete In All Respects As Per Designs, Gfc Drawings And Wayfinding Layouts Issued By The Design Consultant, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Consultant Shall Provide All Visual Design Inputs; The Contractor Shall Prepare Shop Drawings Only If The Engineer/Authority So Decides And Shall Obtain Approval Before Fabrication. The Sign Shall Use A 2 Mm Thick Aluminium Base Panel, Pu Painted To Match The Wall, With Internal Gi Framework For Stiffness. Charkha And Sardar Bhavan/Sachivalaya Letters Shall Be In 8 Mm Thick Laser-Cut Acrylic, Pu Painted And Fixed Using Pin-And-Screw Methods. Block Number Wording Shall Comprise 3 Mm Acrylic Letters And An 8 Mm Aluminium Numeral, Pu Painted And Securely Fixed. The Floor Number Panel Shall Be An 8 Mm Acrylic Panel, Pu Painted, Carrying 5 Mm Laser-Cut Acrylic Numerals Bonded With 3M Vhb Or Equivalent And Attached To The Base With Backing Screws. Department And Officer Names Shall Be On Custom Aluminium (Or Equivalent) Sliding Profile Panels With 2 Mm Aluminium Inserts And Uv-Printed Vinyl. All Fixing Hardware, Drilling, Anchors, Brackets And Any Necessary Breaking Or Cutting Of Rcc, Steel, Structural Steel Or Masonry To Install Supports And Cable Routes, As Well As Complete Making Good And Restoration Of Disturbed Finishes, Are Included In This Item. Careful Handling, Protection, Cleaning And Any Associated Electrical Work, Including Illumination Where Specified, Are Also Within The Scope.?, Providing, Fabricating, Supplying, Transporting, Installing, Testing And Commissioning F. Back Of House Signs For Room And Shaft Doors, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Consultant Will Provide Legends And Layouts; The Contractor Shall Prepare Shop/Fabrication Drawings Only Where Required By The Engineer/Authority And Obtain Approval Before Production. Each Sign Shall Be Formed From Minimum 1.2 Mm Thick Stainless Steel Grade 304 Sheet With Silver Hairline Finish, Edges Deburred And Corners Eased. Text And Symbols Shall Be Chemically Etched And Infilled With Approved Colour, Then Over-Finished With A Matte Pu Lacquer Coating To Provide Durable, Scratch-Resistant And Easily Cleanable Surfaces. Signs Shall Be Sized As Indicated And Fixed Directly To Room And Shaft Doors Using 3M Vhb Tape Or Other Suitable High-Bond Adhesive, Ensuring Full Contact And Long-Term Adhesion Without Visible Fixings. All Fixing Operations, Including Any Necessary Light Abrading Or Cleaning Of Substrate, And Any Local Breaking Or Adjustment Of Door Finishes With Full Restoration, Shall Form Part Of This Item. Scope Includes Design Verification, Fixing/Detail Design, Shop/Fabrication Drawings When Needed, Careful Handling, Substrate Cleaning, Alignment, Protection During Works, Final Cleaning And Any Required Dismantling/Re-Fixing Without Disturbing Neighbouring Elements, Together With Any Associated Electrical Work Indicated On Drawings.?, Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning D3. Fire Exit Door Signs, Complete In All Respects As Per Designs And Fire-Safety Intent Drawings Issued By The Design Consultant, Approved Gfc Drawings, Nbc Requirements, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. All Sign Layouts, Legends, Arrows And Braille Content Will Be Provided By The Consultant; Shop Drawings Shall Only Be Prepared By The Contractor If Required By The Authority And Must Then Be Approved Before Execution. Signs Shall Be Self-Contained Multi-Utility Emergency Exit Units (Wall-Mounted Type) With Moulded Pc White Body, Ip20 Rating Or Higher, Li-Ion Rechargeable Battery, Flame-Retardant Housing And Minimum 90-Minute Emergency Backup As Per Nbc 4.3.4.7.1.F, Of Approved Make Or Equivalent. Artwork Including Legend, Arrow And Pictogram Shall Be Printed On Ars 10000 Or Equivalent Photoluminescent Rigid Sheet, Complying With Pspa Class A / Din 67510 Luminance Criteria And Certified By An Approved Government Of India Laboratory, Drdo And Arai Or Equivalent, And Shall Incorporate Braille Text Formed By Raster-Braille Process To Specified Dome Shape And Dimensions. Units Shall Include All Internal Drivers, Chargers, Leds And Control Electronics, With Power Points And Frls Wiring From Designated Source, Earthing And Protection. Signs Shall Be Mounted On Wall Surfaces Using 3M Vhb Tape Or Equivalent And/Or Concealed Fixings At 1500 Mm From Ffl, With All Substrate Preparation, Drilling, Any Necessary Breaking Or Cutting Of Rcc, Steel, Structural Steel Or Masonry And Complete Making Good Of Disturbed Finishes Included, As Well As Cleaning, Protection And Any Dismantling/Re-Fixing Required Without Disturbing Adjacent Finishes.??, Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning D4. Fire Exit Blade Signs, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Nbc Requirements, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. All Graphics And Layouts Shall Be By The Consultant; Shop Drawings By The Contractor Shall Be Prepared Only If The Authority Requires And Must Then Be Approved Prior To Execution. Signs Shall Be Self-Contained Multi-Utility Exit Luminaires (Blade/Projected Type) With Moulded Pc White Body, Ip20 Rating Or Higher, Li-Ion Rechargeable Battery, Flame-Retardant Construction And Minimum 90-Minute Emergency Backup As Per Nbc 4.3.4.7.1.F, Of Approved Make Or Equivalent. Legend, Arrow And Braille Shall Be Applied On Ars 10000 Or Equivalent Photoluminescent Sheet With Raster Braille Dots To Specified Geometry Meeting Pspa Class A / Din 67510 And Certified As Above. Fixtures Shall Be Suitable For Projection Or Ceiling Mounting With Appropriate Brackets And Hardware. All Internal Leds, Drivers And Chargers, Power Supply Cabling In Frls, Terminations, Earthing And Protective Devices Shall Be Included. Signs Shall Be Fixed At Specified Height Using 3M Vhb Tape Or Equivalent Plus Mechanical Supports, With Substrate Preparation, Any Necessary Breaking Or Cutting Of Rcc, Steel, Structural Steel Or Masonry, Alignment, Making Good, Cleaning And Careful Handling, Including Any Dismantling/Re-Fixing Needed, All Covered Under This Item.??, Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning D5. Fire Exit Directional Signs – Ceiling Suspended (Arrival Lobby & Typical Floor), Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Nbc And Fire-Safety Requirements, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. All Legends And Directional Layouts Will Be By The Consultant; The Contractor Shall Prepare Shop Drawings Only Where Demanded By The Authority And Get Them Approved. Signs Shall Be Self-Contained Multi-Utility Exit Luminaires (Ceiling Suspended Type) With Moulded Pc White Body, Ip20 Rating Or Higher, Li-Ion Rechargeable Battery, Flame-Retardant Construction And Minimum 90-Minute Emergency Backup As Per Nbc 4.3.4.7.1.F, Of Approved Make Or Equivalent. Ready-Made Exit Sign Modules From Certified Fire Sign Suppliers Or Equivalent Shall Be Used, Sized To Suit The Locations And Ceiling Heights. Each Unit Shall Incorporate Led Light Source, Drivers, Charging Circuits, Suspension Hardware, Canopies And Accessories For Secure Ceiling Mounting. Power Points, Frls Wiring From Supply Point, Earthing And Protection Shall Be Included. Installation Shall Include Suspension Supports And Fixing Into Rcc Or Steel Ceilings/Soffits, Any Necessary Breaking Or Cutting Of Slabs Or False Ceilings For Anchors Or Conduits, Full Making Good Of Disturbed Finishes, Cleaning And Any Careful Dismantling/Re-Fixing Required Without Damaging Services.?, Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning D6. Fire Exit Directional Signs – Ceiling Suspended (Parking), Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Nbc And Fire-Safety Norms, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Designs And Layouts Shall Be By The Consultant, With Shop Drawings By The Contractor Only When Required By The Authority. Signs Shall Be Self-Contained Multi-Utility Exit Luminaires (Ceiling Suspended) With Moulded Pc White Body, Ip20 Rating Or Higher, Li-Ion Rechargeable Battery, Flame-Retardant Construction And Minimum 90-Minute Emergency Backup As Per Nbc 4.3.4.7.1.F, Of Approved Make Or Equivalent. Units Shall Be Selected From Approved Emergency Exit Signage Systems Suitable For Parking Heights And Visibility And Shall Include Led Light Source, Drivers, Charger And Indicators, With Multi-Directional Mounting Capability As Required. Provision Of Power Points, Frls Copper Cabling From Designated Source, Terminations, Earthing And Protective Devices Shall Be In The Contractor’S Scope. Installation Shall Include Suspension Supports, Hardware And Any Required Breaking Or Cutting Of Rcc, Structural Steel Or Masonry At Ceilings Or Beams, Making Good Of Disturbed Surfaces, Cleaning And Safe Dismantling/Re-Fixing Where Required, Ensuring No Damage To Building Services.?, Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning D8. Floor Indicator (Staircase), Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Fire-Safety And Accessibility Guidelines, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Consultant Shall Supply All Artwork; The Contractor Shall Produce Shop Drawings Only Where Required By The Authority. Signs Shall Comprise Custom Aluminium Profile Approximately 10 Mm Deep With Anodised Finish In Approved Colour Or Equivalent Corrosion-Resistant Coating, Housing Self-Maintaining Photoluminescent Safety-Way-Guidance Signage Made From Minimum 1 Mm Thick Rigid Ars 10000 Or Equivalent Sheet With Strong Self-Adhesive Backing. The Photoluminescent Sheet Shall Be Self-Extinguishing, Non-Peelable, Non-Scratchable, Non-Breakable, With Silk-Screen Printed Uv-Resistant Paint Complying With Pspa Class A / Din 67510, Luminance Greater Than 700 Mcd/M² At Specified Time And Glow Duration Exceeding 24 Hours, Certified By A Government Of India Laboratory, Drdo And Arai Or Equivalent And Approved By Local Fire Services. Signs Shall Be Fixed On Staircase Elements Using Self-Tapping Screws And/Or 3M Vhb Tape Or Equivalent, With All Substrate Preparation, Minor Breaking Or Cutting Of Surfaces As Necessary, Complete Making Good, Cleaning And Any Careful Dismantling/Re-Installation Required, Together With Any Associated Electrical Works Shown On Drawings.??, Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning D9. Exit Directional (Staircase) Signs, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Relevant Fire-Safety Standards, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Consultant-Issued Artwork Shall Define Legends And Arrows; Shop Drawings By The Contractor Shall Be Prepared Only If Required By The Authority. Signs Shall Be Located At Mid-Landings And Other Specified Points And Shall Consist Of Custom Aluminium Profile Approximately 10 Mm Deep With Approved Colour Anodised Finish Or Equivalent, Housing Self-Maintaining Photoluminescent Signage From Minimum 1 Mm Thick Rigid Ars 10000 Or Equivalent Sheet With Strong Self-Adhesive Backing, Having Properties As In Item D8. Signs Shall Be Fixed Using Self-Tapping Screws And/Or 3M Vhb Tape Or Equivalent, With Proper Surface Preparation, Any Required Breaking Or Cutting Of Substrates, Making Good, Cleaning And Careful Dismantling/Re-Fixing As Needed, And Any Related Electrical Scope Indicated On Drawings.?, Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning D10. Fire Hydrant Sign – Arrival Lobby Area, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Applicable Fire-Safety Norms, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Designs And Legends Will Be By The Consultant; Shop Drawings Shall Be Done By The Contractor Only When Required By The Authority. Signs Shall Consist Of Custom Aluminium Profile Approximately 10 Mm Deep With Anodised Finish Or Equivalent Corrosion-Resistant Coating, Housing Self-Maintaining Photoluminescent Signage Formed From Minimum 1 Mm Thick Rigid Ars 10000 Or Equivalent Photoluminescent Sheet With Strong Self-Adhesive Backing, With Performance And Certifications As Described Under Item D8. Signs Shall Be Fixed At Specified Locations Using Self-Tapping Screws And/Or 3M Vhb Tape Or Equivalent, Including All Substrate Preparation, Any Breaking Or Cutting Of Rcc, Steel, Structural Steel Or Masonry For Fixing, Alignment, Making Good, Cleaning, Careful Handling And Any Dismantling/Re-Fixing Required, Together With Any Related Electrical Scope Shown On Drawings.?, Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning D11. Fire Hydrant Sign – Parking & Typical Floors, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Applicable Codes, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Construction, Materials And Performance Shall Match The D10 Family, Using Custom Aluminium Profile Approximately 10 Mm Deep With Anodised Finish Or Equivalent And Self-Maintaining Photoluminescent Signage From Minimum 1 Mm Thick Rigid Ars 10000 Or Equivalent Sheet With Strong Self-Adhesive Backing, Meeting Pspa Class A / Din 67510 And Certified As Required. Fixing Shall Be By Self-Tapping Screws And/Or 3M Vhb Tape Or Equivalent, With Full Surface Preparation, Drilling, Any Necessary Breaking Or Cutting Of Rcc, Steel, Structural Steel Or Masonry, Making Good Of Disturbed Finishes, Cleaning, Protection During Works And Any Careful Dismantling/Re-Installation Needed, Including Associated Electrical Work Where Specified.?, Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning D12. Refuge Area Signage, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Fire-Safety And Accessibility Guidelines, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Consultant Shall Provide Layouts For Main Signs, Push-Bar Labels And Braille Plates; The Contractor Shall Produce Shop Drawings Only When Required By The Authority. The Main Refuge Signs Shall Comprise Custom Aluminium Profile Approximately 10 Mm Deep With Anodised Finish Or Equivalent, Housing Self-Maintaining Photoluminescent Signage Made From Minimum 1 Mm Thick Rigid Ars 10000 Or Equivalent Sheet With Strong Self-Adhesive, Having Properties And Certifications As Under D8. Mounting Shall Use Self-Tapping Screws Or 3M Vhb Tape Or Equivalent. The Scope Also Includes Push-Bar Autoglow Vinyl Labels Sized To Actual Door Bars (Vendor To Verify Dimensions) And Braille Signs In Stainless Steel Or Aluminium With Pu Coating, Uv-Printed Content And Raster Braille Dots To Specified Geometry, Fixed At Accessible Heights. All Fixing, Including Any Necessary Breaking Or Cutting Of Rcc, Steel, Structural Steel Or Masonry And Complete Restoration Of Surfaces, As Well As Making Good, Cleaning And Careful Dismantling/Re-Fixing And Related Electrical Aspects Shown In Drawings, Is Included.?, Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning D13. Fire Lift Sign, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Fire-Safety Norms, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Consultant Will Supply All Artwork; The Contractor Shall Prepare Shop Drawings Only When Required By The Authority. Signs Shall Consist Of Custom Aluminium Profile Approximately 10 Mm Deep With Anodised Finish Or Equivalent, Fitted With Self-Maintaining Photoluminescent Signage Made From Minimum 1 Mm Thick Rigid Ars 10000 Or Equivalent Sheet With Strong Self-Adhesive Backing, Having Pspa Class A / Din 67510 Performance And Certifications As Specified Previously. Signs Shall Be Positioned As Detailed And Fixed Using Self-Tapping Screws And/Or 3M Vhb Tape Or Equivalent, With Proper Substrate Preparation, Drilling, Any Required Breaking/Cutting Of Rcc, Steel, Structural Steel Or Masonry, Making Good, Cleaning, Protection And Careful Dismantling/Re-Installation Where Required, Including Any Electrical Work Indicated.?, Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning D14. Fire Extinguisher Sign, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Applicable Standards, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. All Graphics And Locations Shall Be By The Consultant; Shop Drawings Will Be Prepared By The Contractor Only If The Authority Requests. The Sign Shall Use A Custom Aluminium Profile Approximately 10 Mm Deep With Anodised Finish Or Equivalent And A Self-Maintaining Photoluminescent Insert From Minimum 1 Mm Thick Rigid Ars 10000 Or Equivalent Sheet With Strong Self-Adhesive Backing, Meeting Pspa Class A / Din 67510, Minimum Luminance And Glow Duration, And Certified As Under D8. Signs Shall Be Located Above Or Adjacent To Extinguishers And Fixed Using Self-Tapping Screws And/Or 3M Vhb Tape Or Equivalent, With All Surface Preparation, Drilling, Any Necessary Breaking Or Cutting Of Rcc, Steel, Structural Steel Or Masonry, Alignment, Making Good, Cleaning And Careful Dismantling/Re-Fixing Included, Along With Any Related Electrical Provisions Shown On Drawings.?, Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning D15. Fire Escape Plan Signage, Complete In All Respects As Per Approved Templates And Designs Issued By The Design Consultant, Nbc Norms, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. The Consultant Will Provide Standard Layouts Indicating “You Are Here”, Escape Routes, Exits, Refuge Areas And Fire-Fighting Equipment; The Contractor Shall Prepare Shop Layouts Only If The Authority So Requires. Each Sign Shall Be Made From Self-Maintaining Photoluminescent Material In Minimum 1 Mm Thick Rigid Ars 10000 Or Equivalent Sheet With Strong Self-Adhesive, Self-Extinguishing, Non-Peelable, Non-Scratchable And Non-Breakable, Silk-Screen Printed With Uv-Resistant Paint, Complying With Pspa Class A / Din 67510 And Certified As Under D8. The Sheet Shall Be Mounted Within A Modular Aluminium Profile Frame With Narrow Rim And Fixed To The Wall Using Self-Tapping Screws Or Equivalent, Including All Setting Out, Drilling, Any Necessary Breaking Or Cutting Of Substrates, Making Good, Cleaning, Careful Dismantling/Re-Installation And Any Electrical Scope If Indicated.?, Providing, Fabricating/Supplying, Transporting, Installing, Testing And Commissioning D17. “In Case Of Fire Do Not Use Lift” Signage, Complete In All Respects As Per Designs And Gfc Drawings Issued By The Design Consultant, Accessibility Requirements, Detailed Specifications, Common Specifications And Directions Of The Engineer-In-Charge. Artwork, Text And Braille Layout Will Be By The Consultant; The Contractor Shall Prepare Shop Drawings Only If Required By The Authority And Shall Get Them Approved Prior To Execution. Artwork Shall Be Printed On Ars 10000 Or Equivalent Photoluminescent Rigid Sheet Meeting Pspa Class A / Din 67510 Performance And Certification Requirements, With Braille Text Formed Using Raster-Braille Process To Specified Dot Radius, Diameter And Height To Ensure Clear Tactile Legibility. The Sign Shall Use A 10 Mm Deep Aluminium Profile Similar To Cosign-Type If Sp2000 Or Equivalent Proprietary Modular System, With All Visible Surfaces Anodised Or Pu Coated In Approved Finish. Content And Symbols Shall Be Uv Printed On The Background, With Raised Text Where Specified. Signs Shall Be Fixed At Designated Lift Lobby Locations Using Self-Tapping Screws And/Or High-Bond Adhesive, Including All Substrate Preparation, Drilling, Any Required Breaking Or Cutting Of Rcc, Steel, Structural Steel Or Masonry, Making Good Of Disturbed Finishes, Cleaning, Protection And Any Careful Dismantling/Re-Fixing Required, Together With Any Electrical Work Indicated For Integration With Emergency Systems.
|
