Bids Are Invited For Acquisition Of Equipment And Structures For A Crushing Set, Aiming To Meet The Operatio ... in Brazil

Work Detail

New, Semi-Automatic Vibrating Feeder, With Hopper Made Of Highly Reinforced Steel Sheet; Supported Under Metallic Chassis On Steel Springs; Vibration System Using Vibrating Box With Eccentric Shaft And First-Line Self-Compensating Bearing; Drive Pulley; Feed Hopper Length Of At Least 3,500 Mm; Hopper Width Of At Least 2,100 Mm; Vibrating Table Width 500 Mm; Feeder Height Of At Least 1,680 Mm; Constructed Of Steel Sheets With A Minimum Thickness Of 3/8” (9.5 Mm); Movable Bottom (Material Skid Plate) With A Minimum Thickness Of ¾” (19 Mm); Steel Chassis With “U” Beams Of At Least 8” And Internal Locking “U” Beam Of At Least 8” And Steel Angle Of At Least 3”; With 8 Steel Helical Springs; Assembly Width Of At Least 1,100 Mm; Length Of At Least 3,200 Mm; New Electric Motor, With Power Of No Minimum 7.5 Hp; Feed Capacity Of At Least 3.5 M³/H; Equipment Weight Of At Least 2,800 Kg; Protection System Made Of Expanded Steel Plate Suitable For Nr-12., New Primary Crusher, Jaw Type, New Equipment With Guarantee; Mm; Maximum Material Exit Opening Of 40 Mm; Housing In A36 Structural Steel Sheet Welded With Sides Of Minimum Thickness Of 50 Mm; Inner Jaw Door In Cast Steel Sae 1020/1045, With Chemical Analysis Certificate And Ultrasound Test Report; Cast In Sae 1020 Steel; Bearings And Covers Cast In Sae 1020 Steel; Shaft In Improved Sae 4340 Steel, With A Hardness Analysis Certificate; Mm And Height Of 120 Mm; Movable Jaw Cast In Austenitic Manganese Steel With A Length Of At Least 1,120 Mm, Width Of 690 Mm And Height Of 90 Mm; Side Wedges Cast In Austenitic Manganese Steel; Steel, According To Nr-12; Length Of At Least 1,800 Mm; Width Of At Least 1,710 Mm; Height Of At Least 1,750 Mm; Equipment Weight Of At Least 6,500 Kg; From ¼”; With At Least 1 Deck For Material Separation; Length Of At Least 1,500 Mm; Width Of At Least 800 Mm; Supported By 4 Helical Springs; Shaft Vibration System With Two Counterweight Flywheels; Metallic Chassis For “U” Beam Support With A Thickness Of 4 Mm And Locking On A “U” Beam Of 4 Mm; Lower Funnel And Discharge Spout Made Of Sheet Steel; New Electric Motor With Minimum Power Of 5 Hp; Protection System In Expanded Steel Plate Suitable For Nr-12., New Jaw Crusher, New Equipment With Warranty; Feeding Mouth Opening Of At Least 1,000 Mm X 280 Mm; Maximum Material Exit Opening Of 100 Mm And Minimum Of 19 Mm; Housing Made Of Welded A36 Structural Steel Sheet With Sides Of A Minimum Thickness Of 50 Mm; Inner Jaw Door In Cast Steel Sae 1020/1045, With Certificate Of Chemical Analysis And Ultrasound Testing; Flywheels Cast In Sae 1020 Steel With Conical Bushing Cast In Sae 1020 Steel; Bearings And Covers Cast In Sae 1020 Steel; Shaft In Sae 4340 Processed Steel, With Hardness Analysis Certificate; Jaw

Contact Information