Tactile Box - Must Be Made Of Mdf Tactile Box - Must Be Made Of Mdf, Containing Two Openings Protected With Rubberized Material (Eva), With The Aim Of Developing Tactile Perception, Containing 16 Pieces Of Geometric Shapes On The Inside. Approximate Measurements Length: 220 Mm X Width: 220 Mm X Height: 130 Mm. Must Comply With Norm Nbr 300-1/2011 And Nbr 300-3/2011 With Ordinance 369/07 - Certified By Inmetro., Wire Kit - Confec. Wooden Base And Wire Kit - It Must Be Made With A Wooden Base And 4Mm Galvanized Wire Covered With Flexible Pvc Tube. It Must Contain 6 Wires Of Different Shapes And Sizes: Triangular Wire: 350 Mm X 100 Mm X 245 Mm; Wave Wire: 350 Mm X 100 Mm X 155 Mm; Russian M. Wire: 250 Mm X 250 Mm X 320 Mm; Spiral Wire: 350 Mm X 100 Mm X 180 Mm; Interlaced Wire: 350 Mm X 100 Mm X 250 Mm; Acrobatic Wire: 350 Mm X 100 Mm X 250 Mm. Must Comply With Norm Nbr 300-1/2011 And Nbr 300-3/2011 With Ordinance 369/07 - Certified By Inmetro., Kit Estrela Feliz Ii - Made In Plastic Kit Estrela Feliz Ii - Made In Low Density Polyethylene Plastic, High Gloss And Brightly Colored, In The Shape Of A Star With 06 Points Rounded, Each Piece Measuring Approximately 73Cm In Diameter. Each Rounded Tip Contains Symmetry Cuts In Them To Facilitate Fitting, Thus Being Easily Shaped, Star With Six Rounded Tips, Pin With Three Rounded Tips, Pin With Two Rounded Tips, Triple Pin With Seven Rounded Tips And Ring With Six Sockets. Packed In A Transparent Pvc Bag With Zipper And Handles. In Compliance With Norm Nbr 300-1/2011 And Nbr 300-3/2011 With Ordinance 369/07 - Certified By Inmetro, Mult Fittings Kit - Made Of Plastic Mult Fittings Kit - Made Of Non-Toxic High Gloss Polypropylene Plastic, In Bright Colors, Containing 1000 Pieces With Various Fittings, In Formats: Freewheels, Bearing, Semicircle, Double Open Wrench And Parallel Bars In Three Different Sizes. Packed In A Transparent Crystal Pvc Bag, With Handle. In Compliance With Norm Nbr 300-1/2011 And Nbr 300-3/2011 With Ordinance 369/07 - Certified By Inmetro, Monta Monta 3D Kit - Made Of Monta 3D Plastic Stickit - Made Of Non-Toxic High Gloss Polypropylene Plastic, Containing 1000 Fitting Pieces, With Checkered Top Hole. Non-Toxic Plastic. In Compliance With Norm Nbr 300-1/2011 And Nbr 300-3/2011 With Ordinance 369 Approximate Measurements: Rectangle 47 Mm X30 Mm X 25 Mm Square: 30 Mm X30 Mm X25 Mm Curve: 60 Mm X20 Mm Comes With 1000 Pieces And Comes In Various Sizes. With A Great Fit And Large Pins That Allow For Hassle-Free Assembly For Children. Recommended To Improve Motor Coordination, Perception Of Space And Size, Some Pieces Come With Wheels. Approximate Piece Measurements: Blocks With 4 Pins - 30Mm X 30Mm X 15 Mm Blocks With 8 Pins - 60 Mm X 30 Mm For 3 Fittings - 45 Mm X 30 Mm X 20 Mm Axles For 2 Fittings - 15 Mm X 65 Mm
Contact Information
View Notice Now...
Fill Detail for Getting Instant Access
Download Tender Document / Tender Notice
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 106662979
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.