|
Bids Are Invited For Furnishing And Allied Interior Work Total Quantity : 1019; 1 Supply, Installation & placement of Chair from ISO 9001:2015, 45001:2018, 14001:2015, 50001:2018 (All ISO certificates must be from IAF/NABCB recognized accreditation body) certified companies which manufacture various products certified with BIFMA Level 2 (attach screen from www.bifma.org website). Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30 and whose Factory is certified with Certificate of Zero waste landfill by Greenco & approved by CII, Water positive index verification certificate by TUV. SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat & back size are*SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H)2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression.3. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)· Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled Nylon insert.4. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features:· 360° revolving type.· 3 position locking with anti shock mechanism.· Tilt tension adjustment.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 9.5 ± 0.3cm. 7. PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors).8 TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. HEADREST: The Headrest sub-assembly is made up of injection moulded glass filled ,Polypropylene which is upholstered with moulded HR polyurethane foam and fabric. It has an adjustment of 4.0 ± 0.1cm & it is assembled over Thrill mesh back chair.The complete headrest assembly is retro fit to the main chair as per approved drawing & as per direction of Engineer In Charge. 2 Nos 2 Supply, Installation & placement of Chair from ISO 9001:2015, 45001:2018, 14001:2015, 50001:2018 (All ISO certificates must be from IAF/NABCB recognized accreditation body) certified companies which manufacture various products certified with BIFMA Level 2 (attach screen from www.bifma.org website). Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30 and whose Factory is certified with Certificate of Zero waste landfill by Greenco & approved by CII, Water positive index verification certificate by TUV. . SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat & back size are*SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H)2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression.3. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)· Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled Nylon insert.4. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features:· 360° revolving type.· 3 position locking with anti shock mechanism.· Tilt tension adjustment.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 9.5 ± 0.3cm. 7. PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors).8 TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. HEADREST: The Headrest sub-assembly is made up of injection moulded glass filled ,Polypropylene which is upholstered with moulded HR polyurethane foam and fabric. It has an adjustment of 4.0 ± 0.1cm & it is assembled over Thrill mesh back chair. as per approved drawing & as per direction of Engineer In Charge. 12 Nos 3 Supply, Installation & placement of Chair from ISO 9001:2015, 45001:2018, 14001:2015, 50001:2018 (All ISO certificates must be from IAF/NABCB recognized accreditation body) certified companies which manufacture various products certified with BIFMA Level 2 (attach screen from www.bifma.org website). Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30 and whose Factory is certified with Certificate of Zero waste landfill by Greenco & approved by CII, Water positive index verification certificate by TUV. CHAIR UPPERSTRUCTURE: It is a single shell 1.2 ±0.1cm. thick hot pressed plywood with moulded polyurethane foam on top & backing foam on rear side. It is upholstered with option of knitted & leatherette fabric.The seat has extra thick foam on front edge to give comfort to popliteal area.The foam backing done in back ( Executive chairs only) for extra fluffiness and comfort in chair.SEAT & BACK HIGH RESILIENCE (HR) POLYURETHANE FOAM :The HR polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m3 and Hardness load 16 ± 2 kgf as per IS:7888 at 25% compression.M.S. VISITOR TUBULAR FRAME : The powder coated (DFT 40-60 micron) tubular frame is cantilever type & made of Ø2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube.ARMRESTS:The armrest top is moulded from polyurethane(PU) with metal insert and mounted on to a tubular frame as per approved drawing & as per direction of Engineer In Charge. 4 Supply, Installation & placement of Table from ISO 9001:2015, 45001:2018, 14001:2015, 50001:2018 (All ISO certificates must be from IAF/NABCB recognized accreditation body) certified companies which manufacture various products certified with BIFMA Level 2 (attach screen from www.bifma.org website). Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30 and whose Factory is certified with Certificate of Zero waste landfill by Greenco & approved by CII, Water positive index verification certificate by TUV. Overall Dimension : 4200W x 1500D x 750H all in mm. Cross members in the Upbeat system are made from 50 mm x 25 mm x 1.2mm thick (as per IS: 7138 ERW).Cross members are assembled by friction fit PDC joinery and Grub screws. All cross members are mounted at a distance of 165 mm from worktop side.Wire management for Single top. Dual access flap is used for conference as per approved drawing & as per direction of Engineer In Charge. 1 Nos 5 Supply, Installation & placement of Chair from ISO 9001:2015, 45001:2018, 14001:2015, 50001:2018 (All ISO certificates must be from IAF/NABCB recognized accreditation body) certified companies which manufacture various products certified with BIFMA Level 2 (attach screen from www.bifma.org website). Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30 and whose Factory is certified with Certificate of Zero waste landfill by Greenco & approved by CII, Water positive index verification certificate by TUV. SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat & back size are*SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H)2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression.3. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)· Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled Nylon insert.4. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features:· 360° revolving type.· 3 position locking with anti shock mechanism.· Tilt tension adjustment.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 9.5 ± 0.3cm. 7. PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors).8 TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. HEADREST: The Headrest sub-assembly is made up of injection moulded glass filled ,Polypropylene which is upholstered with moulded HR polyurethane foam and fabric. It has an adjustment of 4.0 ± 0.1cm & it is assembled over Thrill mesh back chair. as per approved drawing & as per direction of Engineer In Charge. 14 Nos 6 Supply and installation of acoustic Blinds The Control unit is made of high strength reinforced plastic.The clutch is of wrap spring design. High carbon steel springs are provided to transmit motion from driving to driven members of clutch mechanism. Clutch is operated directionally by the use of endless beaded chain. Idler:Idler is of high strength reinforced plastic, consisting of a centre shaft. The idler is mounted on the bracket by using a plastic lock. The metals leeve inside the plastic lock provides bearing surface for the centre shaft, which rotates freely, providing smooth, quiet and long wearing operation. Head rail: It is an aluminium extrudedrail Powder coated in white. Control unit and Idler are mounted on the Head rail with powder coated M.S. brackets. Roller tube: It is an anodized extruded tube of high strength alloy.Control unit and Idler are fixed to the either ends of the tube. The fabric of the blind is fitted to the tube with heavy duty adhesive tape. Bottom rail: It is an aluminium extruded rail with a groove for fixing the fabric and powder coated in white. It is fixed to the bottom of the fabric and the purpose of it is keep the fabric in tension and straight. The fabric is fitted to the tube using plastic insert. The end caps of the tube are ABS.Operating chain: This is made of 4.5 mm plastic beads moulded on 2.2 mm thick polyester chord. The pitch of the beads is 6mm. The chain drives the sprockets of the control unit to close and open the blind. The pitch of the chain corresponds to the sprocket in perfect match for trouble free operation. Fixing brackets &clamps: These are used to fix the blind to the wall o rceiling .'L' bracket is made of mild steel and zinc plated.The clamp is made up of spring steel of thickness O.6 mm and zinc plated. etc. Fabric degree of opacity 100%, thickness 0.65mm, weight 415gm / square meter, 100% polyester composition all complete as per Consultant's drawing, Specification and as per approved drawing & as per direction of Engineer In Charge. 110 Sqft 7 Supply and installation of Manual Screen Roller Blinds containing fabrics . The fabric shall be 3000mm max.wide made of fabric from 25% polyester + 75% green dyed in fade resistant colors and coated to give stability, dust repellence and stain resistance. The fabric shall be 0.6 mm thick and weight 405gm.per sqm.with Fragrance-free & Non-toxic fabric with Fire Retardant: fire classification : M-1 with openness factor 3%.The mechanism of blinds contains the roller tube, shall be of extruded Aluminium alloy 48 mm O.D. with a minimum wall thickness of 1.0 mm duly anodized for long life. It shall be designed to accommodate spring clutch and gear system. Spring clutch with gear shall be provided for finger-touch raising and lowering of the blind. Clutch shall be of wrap spring design with high strength fiberglass reinforced polyester assembly andhigh carbon steel springs to transmit motion from driving to driven members of clutch mechanism. Clutch shall be crash proof, prevent slippage and shall raise and lower smoothly to any desired height. Clutch never needs adjustment. Idler shall be of high strength fiberglass reinforced polyester, consisting of an outside sleeve and centre shaft. Sleeve shall provide bearing surface for roller tube and rotate freely on centre shaft,providing smooth, quiet and long wearing operation. Bracket shall be tomized steel powder coated to give superior finish. Bracket shall accommodate overhead, side or face mounting with clutch assembly on either end roller. Bottom of blind shall be provided with Aluminium tube powder coated in a colour matching to the fabric or standard. The fabric shall be enclosed in the suitably created pocket along with the tube. The tube shall be closed from sides with end caps to give a neat look. The appropriate fixing surface & electrical connections for motor as per the prerequisites of oem all complete as per Consultant's drawing, Specification and as per direction of Engineer - in - Charge. 8 Supply and installation of wooden partition with glass pannel and intigrated full height swing door of TEXTURE EMBOSSED PARTITION full height partition made of 45mm x 45mm properly seasoned hard wood Rectangular section framework @ 600mm c/c bothways with 9mm thick BWR ( confirming to IS : 1328) fixed on both sides of the framework, as approved upto false ceiling, as per design insulated with premium grade 50mm thick resine bonded rock wool IS 8183 sheet of 48kg/cum all complete. 1mm ISI grade natural wood veneer, middle pannel will be fixed with 8mm clear glass covered with proper glass masking intigrated with 12mm Double Leaf Entrance on min 150kg floor spring per direction of the Work in Charge 51 Sqft 9 Supply, Installation & placement of ethnic design DINING TABLE with batali curved legs. Overall Dimension :2100W x 1500D x 750H all in mm , Structure Material : Teak Wood , Finish : Walnut Finish , Shape : top to be finished with 18mm BWR ply as per IS 303 and 2mm natural veneer Rectangle as per approved drawing & as per direction of Engineer In Charge. 2 Nos 10 Supply, Installation & placement of ethnic design DINING CHAIR .Overall Dimension :654W x 654D x 1054H all in mm , Chair Frame Material: Teak Wood , Seat Material: Polyester Fabric upholstery with PU Foam , Finish Color: Dark Brown , The chair has nail head accents. curved armrests by batali work finish as per approved drawing & as per direction of Engineer In Charge. 14 Nos 11 Supply and Installation of GLAZED WOODEN JAFRI PANEL WITH LED LED & Toughened GlassDoor Illuminated wooden CNC cut jafri sandwitch partition with opaque PVC panel infill: Providing Supplying and fitting of Full hight iluminated decorative partition having upper and bottom frame Box framework of 200 x 150 mm fabricated from min 18mm BWR grade Plywood as per IS 303 duly pasted with min 2mm Decorative Veneered as per IS 3097 with Synthetic Resin Adhesives (Urea-formaldehyde) IS 1508 and hardwar. should be made of The 6mm thick MDF decorative Panels as per IS 12406 are made Using CNC Routing Process, which is a manufacturing process in drill bit is controlled using a computer to trace a desired design. The back of the perforated Panel fixed with min 2mm transluscent Acrylic sheets IS 2835. In between the MDF decorative Panel to be fixed with 5mtr lenght Philips / Havels make LED Strip Light for illumination complete with fitting & fixing 12mm thick toughened Glass door with all necessary Floor spring, patch fittings, handle of choice, locks (Godrej/Dorma make) and finished with Glass film of choice as per approved drawing & as per direction of Engineer In Charge. 356 Sqft 12 Supply, Installation & placement of Wooden Coat Stand ,Dimensions (in Inches) : 18.5 Inches(L) x 12 Inches (B) x 41 Inches(H) ,Pattern : Solid , Weight : 9 kg , Material : Teak wood , Finish: Natural polish of which results in attractive teak grains surface. It consists of top hanger on attractive pedestal. A smooth, lacquered teak wood construction as per approved drawing & as per direction of Engineer In Charge. 2 Nos 13 Supply, Installation & placement of factory finish movable Service Counter with Drawer & Storage Supply of Customise Service Table Drawer - Storage (1500x 900 x 600) combination of 19, 12 & 6 mm BWR ply along with 1mm ISI marked laminate and wooden polished lipping on all the edges , top to be finished with minimum 12mm jet black moulded polished granite and base fitted appropriate castors as per direction of engineer in charge. 1 Nos 14 Supply and installation of Decorative premium Rugs hard carpet finished with HD knitt. Overall dimension 3ft x 2ft (Rectangular) , Material 80% Viscose + 20 % Acrylic Chenille,Weave Type: Power Loom , Item Weight 1.34 Kilograms , Pile Height 5.5 mm, Pattern : Classical ,Shape: Rectangular as per approved drawing & as per direction of Engineer In Charge. 2 Nos 15 Supply & installation full height customised modular APO intigrated Partition system for Cabins: Lower panel upto 1200mm height will be fabricated with pre-laminated board of 09mm thickness in color of choice & metal skirting in both sides, above the prelaminated partition there will be 900mm high 8mm clear toughened glass partition in both sides and above the Glass part there will be 9mm thick 1100mm high pre-laminated board. Overall partition thickness will be 75mm. Provision of running of electric & lan wire as per requirement. 75mm x 75mm x 1.6mm hollow section square/round post as per requirement for stability will be used. Partition frame will be MSPC and Section thickness will be 1.2 to 1.5mm as per availability. Overall partition height will be 3200mm. 1No. door cabin will be provided with hardware, hinges, lock and handle. All pre-laminated sandwich partition portion will be rock wool infilled for sound insulation. All components of fabrication used will be of ISI Grade as per approved drawing & as per direction of Engineer In Charge. 16 1 Nos 17 Supply, Installation & placement of Visitor Chair from ISO 9001:2015, 45001:2018, 14001:2015, 50001:2018 (All ISO certificates must be from IAF/NABCB recognized accreditation body) certified companies which manufacture various products certified with BIFMA Level 2 (attach screen from www.bifma.org website). Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30 and whose Factory is certified with Certificate of Zero waste landfill by Greenco & approved by CII, , Water positive index verification certificate by TUV. Overall Dimension (WxDxH): 609 x 642 x 982. Seat height: 448, all in mm. 1) SEAT ASSEMBLY: The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. Seat SIZE: 47.0 cm. (W) x 48.0 cm. (D). 2) BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x D.16 ±0.0128cm. It upholstered with Leatherette. MID BACK SIZE: 47.7 cm. (W) x 60.1 cm. 3) VISITOR TUBULAR FRAME: The tubular frame is cantilever type & made of 02.54±0.03 cm x 0.2±0.016 cm thk S.S 202 tube. The back connected to frame through chrome plated high pressure die cast connector piece as per approved drawing & as per direction of Engineer In Charge. 3 Nos 18 Supply, Installation & placement of factory finish movable Storage tall unit with devided compartments overall dimension (1800x 900 x 600) combination of 18, 12 & 6 mm phenol bonded BWR ply along with 1mm ISI marked laminate in colour of choice and PVC edge banding on all exposed edges and base fitted appropriate castors as per approved drawing & as per direction of Engineer In Charge. 19 Supply, Installation & placement of Bedside Table from ISO 9001:2015, 45001:2018, 14001:2015, 50001:2018 (All ISO certificates must be from IAF/NABCB recognized accreditation body) certified companies which manufacture various products certified with BIFMA Level 2 (attach screen from www.bifma.org website). Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30 and whose Factory is certified with Certificate of Zero waste landfill by Greenco & approved by CII.Overall Size : Height – 512.0 mm , Width – 402.0 mm, Depth – 422.0mm.Material :Storage unit -- CRCA steel 0.6 mm thickness.Stand for M.S. Pipe in 1.2 mm Thickness , Bed Side Table : Glass Top -Plain Glass in 5.0 mm Thickness .Construction : Knockdown construction.Finish : Epoxy powder coated to the thickness of 50 microns (+- 10).Storage unit Body is in Shell White & Drawer in Textured Pacific Blue colour.Under structure & Mirror Frame are inTextured Black colour as per approved drawing & as per direction of Engineer In Charge. 16 Nos 20 Supply, Installation & placement of Mattress from ISO 9001:2015, 45001:2018, 14001:2015, 50001:2018 (All ISO certificates must be from IAF/NABCB recognized accreditation body) certified companies which manufacture various products certified with BIFMA Level 2 (attach screen from www.bifma.org website). Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30 and whose Factory is certified with Certificate of Zero waste landfill by Greenco & approved by CII.Thickness 50 mm.Matt. Dimensions L x W x T (cm) - 198.1 x 182.9 x 12.7 , Finish Color - Red , Layers - Multiple , Primary Material - PU Foam ,Mattress Top-Normal as per approved drawing & as per direction of Engineer In Charge.
|
