|
Annual repair maintenance operation Works, Sh: Supply Of Glf Spares At Hubballi Airport. - Supply of Led type Elevated MIRL Taxiway/Turning pad light including LED, Driver unit, connecting lead, blue lense and central column assembly suitable to fix on existing Cl box base plate and suitable to operate with existing isolating transformer (15W 20/6.6 or 6.6/6.6A) etc.with compliance of ICAO Annex 14 vol:l, design manual part IV & V and FAA AC150/5345-46 (current Edition) by FAA Certified Lab. Supply of Elevated type, Unidirectional High Intensity Runway threshold Light Fitting (Green) suitable for use with 200W, 6.6A. bi-pin halogen lamp complete with spreader lens clamping mechanism, pre-focus bi- pin lamp holder, central column assembly, breakable coupling, two pin secondary lead plugs with suitable Green/Red/Clear spreader lens specified accessories confirming to ICAO requirement & particular specifications etc. complete as required. (Make:YOUYANG or equivalent). Threshold Light fitting (Green) End Light fitting (Red) Supply of following Bi-directional INSET TYPE HIRL EDGE LIGHT FITTING with shallow base, matching body made of die cast aluminium, 2 x 105W 6.6Amps pre-focused Halogen lamp, connected heat resistant accessories, prism assembly, optical assembly, Oring seal, pressure relief plug, hardware, clearlyellow lences etc. complete as required including one set of spare Oring, gasket and one set of spare lamps complete as required as per specifications. Left beam clear and right beam yellow or amber Left beam clear and right beam.clear Supply of CI Adaptor / collar housing box, water tight, round type, metal container of Dimension outside height 150mm, Outside Diameter 330mm, made of 10mm thick all around, top Surface 15mm thick smoothly machined to receive base of light fixture base plate, installed underground/co grouting to recieve secondary cable leads. having a clear holes centre 75mm above bottom surface suitable to receive one Nos of 32mm dia "B" class Gl pipe fixed with check nuts. Cl box should have two SS earth bolts of M10 x 30mm with tapped holes inside near the hole and having a drain hole at the bottom suitably tapped to receive 15mm dia "B" class Gl pipe and having clear opening of 220 mm at the top surface, 6 nos. M-10 taped holes at hole centre of 260 mm to receive fitting base plate and bolts etc complete as required Supply of 200 watts, 6.6 Amps, two pin Halogen lamp suitable for the Runway and approach light fittings. (Similar to Osram make 64386 model) 200 watts, 6.6 Amps, two pin Halogen lamp suitable for the existing youyang make Runway edge light fittings (Make/Model: OSRAM-58750
|
