|
Tender For Additional / Alternator To Omq At Af Stn Amritsar Cantt; 1 Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc completed all as specified. 2 M & L for rendering 15 mm thick on brick or concrete surfaces of any description finished even & smooth in CM 1:4 upto three storey complete all as specified and directed. 3 M & L for rendering 12 mm thick on faces of brick work or concrete surface finished even & smooth in CM 1:6 complete all as specified and directed. 4 M & L for rendering 5 mm thick onbrick or concrete surface of ceiling finishedeven & smooth in CM 1:3 complete all as specified and directed. 5 M&L for rendering 20mm thick cement plaster in layer of (15+5mm) on concrete surfaces in cement mortar (1:4) in patches and repairs at columns, chajja, canopy,ceiling and soffits finished even and smooth without using extra cement using GI chiken wire mesh having dia( 0.71mm and mesh size of 12mm) upto 7 m height as directedincluding necessary scafolding arrangement as required at site complete all as specified and directed. 6 Prepration of newly plastered wall surfaces of any description complete all as specified and applyingTwo coats of oil bound distemperover and including a coat of alkali resistant primer over a coat of 1mm thick putty complete all as specified and directed by Engr-in-charge. 7 Complete removal of existing treatment of any description, including prepration of wall,fascias ,ceiling surfaces of any description complete all as specified and applyingTwo coats of oil bound distemper over a coat of 1mm thick putty complete all as specified and directed by Engr-in-charge. 8 Prepration of newly plastered wall surfaces of any description complete all as specified and M& L for applyingTwo or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted ) with silicon additives @ 1.43 ltr/10 sqmover and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm over new surface. 9 Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and M& L for applyingTwo or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted ) with silicon additives @ 1.43 ltr/10 sqmover and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm over new surface. 10 Preparation of old painted steel surfacs of any description not otherwise described over 10 cm width or grith and applying two coat of synthetic enamel paint up to height of 12.00 mtrs complete all as specified and directed. 11 Demolition of cement concrete (unreinforced) in sunken portion of any description and in any position not otherwise specifically provided all as specified. 12 M & L for 25mm thick PCC 1:2:4 type BO (using 12.5mm graded stone aggregate) as in sub base floor complete all as specified and directed. 13 M&L for cement concrete Type- F2 1:7:12 (40 mm graded aggregate) in filling and mass concrete as in sunken portion all as specified and directed . 14 M&L for 15 mm thickrenderingin1:4 CM with using 3% WPC as in sunken portion complete all as directed. 15 Applying two coats oftwo component elastomeric acrylic polymer modified cementitious waterproofing coating, Smartcare Ultra block 2K or equivalent, having 215% elongation as per ASTMD-2370, resisting 5 bars hyrostatic pressure as per DIN 1048, crack briding upto 3.50 mm as per EN 1062-7 and sprinkling dry fine sand over wet second coating complete, as per maunfactures specifications.NOTE: - Unless otherwise recommended by manufacturer, the mixing ratio of the components shall be 6 parts of powder and 4 partsliquid without any water addition in the mixing, etc. 16 Dismantling floor, hearth or wall tiling or stone chipsor terrazoincluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, etc completed all as specified. 17 M&L Coloured Glazed ceramic tiles in vertical surface 450X350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat. 18 M&L Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors,skirting etc. set and jointed in neat cement slurry and pointed in white or coloured epoxyto match the shade including 15 mm thick Screed bed or bedding layer of mortarfor laying floor finishes in CM 1:4 19 M & L for anti skid Vitrified ceramic tiles light shade10mm thick (squqre/rectangular)polished,area of each tiles exc 0.42 sqm but not exc 1 sqmin floors, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 complete all as specified and directed 20 M&L for coloured vitrified tiles heavy duty 400 x 400 mm x 8-10mm thick, colour and design as approved,set and jointed using neat cement slurry and pointed in coloured cement or white cement mixed with pigment to match the surface, laid over and including 15 mm thick screed bed or bedding layer in CM (1:6), complete all as specified and directed by Engr-in-charge 21 Machine cut Kota stone slab flooring 16-20 mm thick as staircase step/ riser / skirting dado in single piece (of length not more than 1200mm) over and including 20mm thick screed base in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, cutting and polishing completeall as specified. 22 M&L for Dismantling of brick tiles or terracing tiles single layer on roofs all as specified and directed 23 Demolition of Mud in roof any thick ness including plastering and leeping (Whether full thickness removed or only a parttherof) 24 M&L for brushing neat cement slurry with 3.0 kg per sqm complete all as specified and directed. 25 M & L for providing cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof, Kerb or mud stops, rounded chamfered on edges before treatment of roof surface all as specified and directed by EIC. 26 M&L for Cement concrete type B-2 (1:2:4) using 20 mm graded stone aggregate mixed with & incl. water proofing compound as in roof padding / floor subbase averaging thickness of 50 mm on roof to maintane slope correction of the depresses/ unduation portion complete all as specified. Note : WPC shall be measured and paid separately. 27 Supplywater proofing compound to mixed with cement mortar etc complete all as directed. 28 M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric( wt. notless than 150 gms/sqm) laidon one coat of approved bituminous primer, having density in the range of 0.87 to 0.89 kg/litre at 25 degree centigrade and viscosity of 40 to 160 CPS, manufactured by same manufacturer @ 0.4 litre / sqmprimed surfaceby torch application method after allowing 24 hours for primer to dry complete all as specified by Engr-in-charge. 29 Note: Sheet should be five layered prefabricated Atactic Polypropyleen Polymer (APP) modified 3 mm thick membrane (weighing not less than 3 kg/sqm) reinforced with 160 gsm polyester non- woven fabric. Concrete of roof surface shall be scratched with scratched tool before finishing roof surface when the concrete surface is still green,10mm thick 1:4 cement plaster shall be laid .The roof surfaces shall be throughly wire brushed, washed, dried up and cleaned to all foreign matter nd dust prior to the appliction of primer. On the dried surface one coat of approved bituminous primer, having density in the range of 0.87 to 0.89 kg/litre at 25 degree centigrade and viscosity of 40 to 160 CPS, manufactured by same manufacturer @ 0.4 litre / sqm shall be applied. APP membrane shall be laid on primed surface by torch application method after allowing 24 hours for primer to dry . Laying off APP membrane will normally be laid in length at right angle to the direction of slope. The overlaps shall be of minimum 100mm on longitudinal direction and 150 mm on the transverse direction. all overlaps shall be bonded with bitumen primer and levelled by heating the overlaps with brutane torch. the treatment shall be done by the approved authorised applicatiors. 30 Material and Labour, 40mm thick brick tiles laid on and including 15 mm thick cement screed bed in CM (1:6) using grey cement and grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement laid on concrete roof, complete all specified and directed. 31 All a per Srl item No 29 abovebut except tiles (old serviceable dismantled tiles obtained from Srl item No 22 shall be reused after necessary cleaning of mortar) 32 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm complete all as specified and as directed by the Engineer-in-Charge 33 Taking down, Chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq. m each complete all as spd and directed. 34 Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each complete all as specified directed. 35 S & F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs,hinges , lock strike plates etc and applyinga shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed by the Engineer-in-Charge Note - (PCC will not be paid extra ) 36 S & F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs,hinges , lock strike plates etc and applyinga shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed by the Engineer-in-Charge. Note - (PCC will not be paid extra ) 37 S & F for flush shutters of 30mm thickness, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as spd and directed. 38 S & F 35 mm,2nd class hard wood factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as spd and directed. 39 M&L for Solid PVC Door Frames of size 50mm x 47mm made out of 5mm wood grain PVC sheet reinforced with M.S. Square tube , supplying & fixing in opening as per specification & drawing complete all as specified and as directed. 40 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets used instead of plain color and 5mm thick x 15mm wide PVC shhet eading used inside stiles and rails and decorative pvc beading of 10mm x 10mm used instead of exposed portion of PVC sheet beadingfor top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed. 41 S&F150 mm ISI marked in size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. 42 S&F 250 mm ISI marked in size aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete and fixing clips of sheet cast or extruded sectionsand fixed complete all as specified and as directed. 43 S&F 100 mmISI marked in size butt hingesextruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed type B-21 complete all as specified and as directed. 44 S&F150 mm ISI marked in size aluminium alloy handles , anodised, fabricated type, anodised complete all as specified and as directed. 45 S & F 300 mm long ISI marked mild steel ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed by engineer incharge 46 S & F ISI marked floor door stopperof aluminium alloy body 140 mm cover plate and tounge , anodized with hard drawnsteel spring fixed in floor as specified and directed by Engr-in-charge. 47 S & F in repair Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staple. 48 S&FSheet glass 3mm thick ordinary qualityand glazing with oil putty in squares in n.exc 0.5 sqm in each panescomplete all as specified and directed 49 S&F 4 mm thickFigured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane plain sheet glass ordinary quality and glazing with aluminium beading, complete all as specified and as directed. 50 M&L preparing new wood & wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed. 51 M & Lfor 18/19 mm thick, Block boards, grade 1 quality, exterior grad commercial type, fixed with screws to frame-work as in cupboard,kitchen cabinet and partition , shelf, etc completed all as specified and directed by engineer in charge. 52 M & L for 6 mm thick, No of ply 5,plywood, grade BWP, type BB fixed with screws to timber frame work, etc completed all as specified. 53 M & L for 0.9 mm thick, Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions, etc completed all as specified. 54 Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. 55 M&L for laying 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite over screed bed of cement mortar 1:4 of 10mm thickness all as specified and directed by Engr-in-charge. 56 M & L for Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations etc completed all as specified. 57 S&F in repair for Vitreous China wash down water closet pan ( pedestal pattern) white ( excluding flushing cistern and flush pipe) including plastic water closet seat closed pattern with flat botton and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed. 58 S&F in repair WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and cement concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed. 59 S&F for 10 ltrs capacity high or low level flushing cistern PVCmarkedwhite valveless syphonoic action type, inlet ballfloat and handle complete including PVC connection (15mm dia and 450mm length ) and bracketscomplete all as specified and as directed. 60 S & F in repair Vitreous china wash basin white flat back 550 x 400 mm with pedestal including fitting of stainless steel waste coupling 32mm suitable size ,PVCwaste pipe ,angle iron brackets with painting of brackets etc fixed in repairs completeall as specified and directed. 61 Supply and fixing bib tap long body, cast copper alloy, fancy type, chromium plated,screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, fixed as in repair, including removal of old to store for reuse or for credit,complete all as specified and directed. 62 S & F in repairs CP mixerfancy type,for WHB , kitchen sink etc. screwed down high pressure, with or without lettered ‘hot’ & ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed. 63 S&F in repair stop valves/ angel valves 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc all as spd 64 S&F in repair concealed stop cock type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. 65 S&F PVC connection pipeready made for connecting cistern, WHB etc 15mm dia 450 mm long with PTMT nuts, complete all as specified and as directed. 66 S&F in repair brass chromium plated shower roses with swivel joints, 125 mm sizein square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed. 67 S&F in repair glass corner shelf 12 with brass brackets of heavy duty and thickness of glass min 6mm and railing 60cm long fixed all as directed 68 S&F in repair Soap dish apprx size 160x 160x90mm complete all as per specifiedand directed 69 S&F Health faucet mild steel chromimum plated auitale for 15mm dia pipe with 1.25m long long flexible tube ABS wall hook including making connections and fixed and complete all as specified 70 S & F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. 71 Grating doom CP 125 mm dia ofwith or without waste pipe hole (minimum weight 40 gms) fixed in repairs complete all as specified and directed. 72 Supply and fixing in repair curtain rod, mild steel chromium plated with fixingbrackets fixed to wall with screws, PVC plug including taking down existing curtain rod complete all as specified and directed. 73 S&F in500 Ltr capacity, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling old tank all as specified inSSR Part I. 74 Disconnecting existing tank capcity 500 ltrssetting aside (or lowering if required ) for repair , cleaining, etc and hosting if requiredreconnecting and re-fixing in postion. (Cleaning reparing etc measured sepratly) 75 S&F in repair20 mm bore Ball brass valves , high pressure , with polythene float valve and flynut complete , screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. 76 S&F in repair Gun metal globe or gate valves, with iron wheel head screwed both end for iron pipe and fixed of size 20mm dia complete as all specified and as directed. 77 M&L for Galvanised iron tubing 15mm bore,medium grade,with all fittingsfixedto walls or ceiling or laid in floors, in concealed pipe work cutting and making good the chases upto 10cm girth etc in cement mortar(1:3) after fixing of pipe,incuding taking down of old rusted/u/s GI pipe remove to store or credit, complete all as specified and directed.(Rates for cutting of chases is included). 78 M&L for Galvanised iron tubing 20mm bore,medium grade,with all fittingsfixedto walls or ceiling or laid in floors, in concealed pipe work cutting and making good the chases upto 10cm girth etc in cement mortar(1:3) after fixing of pipe,incuding taking down of old rusted/u/s GI pipe remove to store or credit, complete all as specified and directed.(Rates for cutting of chases is include). 79 Dismantling of CI/PVC pipe of 75/100mm dia fixed with cement joint. 80 S&FPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / walls 110 mm dia complete all as specified and as directed. 81 S & F 75 mm dia bore PVC (SWR) pipe (Type B) single socketed in trenches/floors in any length with rubber ring joints complete all as specified and directed. 82 S&F PVC (SWR) bends with access door for 110 bore of pipe complete all as specified and as directed. 83 S & F PVC (SWR) bends with access doorfor 75 mmbore pipe incl jointing material complete all as specified and directed. 84 S & F PVC (SWR) junction single, (Single T) equal or unequalfor 110mm diabore as specified and directed. 85 S & F PVC (SWR) junction single, (Single T) equal or unequalfor 75 mm diabore as specified and directed. 86 S&F in 75 mm dia PVC (SWR ) floor trap/ nahani trap with grating, plain with grating including jointing with solvent cement complete all as specified and directed 87 M & L PVC gully trapsof size 125mm/110mm including for setting and jointing to drain with CM 1:1 etc complete all as specified & directed. 88 S & F PVC (SWR) vent cowl equal or unequalfor 110mm diabore as specified and directed. 89 S & FTraps ‘P’ or ‘S’, bore of pipe in 100 mm , etc complete all as specifed and directed. 90 Writing letters or figures by specialist / professional painter (Block, Roman, Italic or indian) with thick black synthetic enamel paint not exc. 30cm heighton white basecomplete all as specified. 91 M&L for dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed by Engr-in-charge. 92 M&L for steel rolling shutters with 1mm thickness of lath, with out ball bearing as specified including top cover , anchoring rod hasp and staple and one shop coat of primer erected in position as indicated complete , gear operated type with bevel gear box and crank handle all as specified and directed by Engr-in-charge. 93 S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240all as specified and directed by EIC. 94 S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. 95 M&L for two coat synthetic enamel paint over a coat red oxide primer on new steel surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete all as specified and directed by Engineer-in-Charge. 96 M&L for welding in repairs for metal exc 6 mm but not exc 9mm for MS cabinets , windows etc all as specified and directed by Engr-in-charge 97 M&L for Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed. 98 M&L RCC(nominal mix) type B-1 1:2:4 using 20mm graded aggregate in roof slabs supported on walls, beams and columns etc./complete all as specified and as directed by Engr-in-charge. 99 Material and labour for Formwork to sides and soffits ofroof beams, lintels, cantilever, shelves, splay between floor and beam etc., flat fair finished concrete surfaces, complete all as specified and directed. 100 S&F mild steel TMT bars 5mm dia & over upto and incl 10mmcut to length bent to shape reqd, incl cranking bending spirally for hooping for col,hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia or securing with clips qty confirming to Fe-410W(Gde- E-250) or Fe-290(Gde-E-165) complete all as specified and as directed. 101 Demolition of brick work builtin cement mortar incl all quoins, arches, pillars etc complete all as specified and directed . 102 M&L, Brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius built in CM 1:4complete all as specified and as directed. 103 S& F in repair factory made box type glazed and gauged steel window/ventilator made out of ERW hollow P&T section including taking down of old window . Both window to be welded together with flat iron 25x3mm to outer frames on both sides complete all as specified and shown in drawing No CEAF/STD-184/2012 Sheet No 1/3, 2/3 & 3/3, including MS grill and necessary formwork complete and including shop coat redoxide primer with following fittings welded to frame/shutter:-(a) Hold fast 150mm long 25mmx6mm iron made to shape-02 Nos in each window (both sides)(b) Handle of Z section 20mmx25mm Each leaf(c) 100mm stopper-01 No per leaf.(d) MS tower bolt 150mm long - 02 Nos in each leaf.(e) Cleat 55mm long of hollow square 15mmx15mmx24mm welded to hinges gauze wall thickness welded to hinges of 50mm size-01 No per leaf.(f) MS box type hinges of size 75x12mm-03 Nos per leaf(g) Fabrication & fixing complete(h) Flat iron for fixing wire gauge to gauge window Glass pane, wire gauge and synthetic enamel painting work complete.Note:- (i) Glass panes, wire gauze and painting shall be measured & paid Separately under respectiveii) Design shall be got approved from the Engineer-in-charge as per Drg No CEAF/STD-184/2012Sheet No 1/3, 2/3 & 3/3 before fabrication and bulk order to the manufacturer. 104 S&F stainless steel with wire or net drawers/ kitchen cabinets for modular Kitchen Basket for utensil,dustbins, basket of any size and type incl all necessary accessories as directed by Engr-in-Charge 105 S&Fin repair CP wall mixture with telephonic shower lead fancy type hanging arrangement and telephonic shower sutaible for 15mm bore pipe fixed to wall all as specified and directed. 106 Supply and fixing stainless steelplate rack made out of 1mm thick stainless steel sheetwith over all size 600 mmx750 mmx250 mm, complete all as specified and directed. 107 S&F in repair bathroom PVC cabinet with best quality mirror, shelves inside, size 450mm x 600mm including required fittings all as directed. 108 S&F stainless Steel Telescopic Drawer Channel/Runner (Be Blue) 18-20 Inch with 3 Ball Bearing Weight Capacity Upto 45 kg Pack of 1 Paircomplete all as specified and directed by Engineer-in-charge. 109 S&F stainless Steel fancy type round D Drawer Cabinet Handles, 4 Inchincluding all fitting complete all as directed by Engr-in-Charge. 110 Supply & fixing of auto soft closing hinges openable at or duck hinges for kitchen cabinet shutters all as specified and directed by Engr-in-Charge. 111 S&F in repair StainlessStainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers wastepipe, cast iron cantilever brackets,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm all as specified and directed by Engr-in-charge. 112 Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (above or below ground level) all as specified. 113 M&L for laying PCCtype B-1, 1:2:4 (using 40mm graded stone aggregate) as in flooring etc all as specified and directed by Engr-in-charge. 114 Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft & loose soil. 115 M&l for removal of excavated material exc. 500m upto distance of 1.5 km and depositing all as specified and directed. 116 M&L 100mm thick Cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) as in flooring etc. complete all as specified & directed. 117 Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved design & pattern as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layerthrough vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand , including coping at sides from PCC 1:2:4 all as specified and directed by Engr-in-charge. 118 Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.5 mtr depth for foundation as for manholes, pier holes, laying at cables, foundation for poles etc. and getting out in hard/dense soil complete all as specified & directed. 119 Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cms complete all as specified 120 Removing excavated material soil to a distance n.exc 50 m and deposited where directed at a level not exceeding 1.5 m above the starting point 121 Plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregates) as in foundation of manholes and filling around the manholes complete all as specified. 122 M&L for Concrete bed to 150 mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in cement concrete (1:3:6) type C-2 complete all as specified and as directed. 123 M& L for 150 mm dia Reinforced concrete pipes, class NP2, laid in trenches and jointed complete with collars complete all as specified and as directed. 124 Demolition of brick work builtin cement mortar incl all quoins, arches, pillars etc complete all as specified and directed . 125 M&L for Brick work built in cement mortar 1:6 using old size sub class B bricks in wall straight or curved on plan exc 6m mean eadius complete all as specified and directed . 126 M&L for 15 mm thick rendering on fare faces of stone masonry surface in cement mortor 1:4 including finishing the surface even and smooth without using extra cement including mixing of liquid water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately) complete all as specified. 127 Plain cement concrete (1:2:4) type B-O (using 12.5 mm graded crushed stone aggregates) as in benching, copings, bed plates and the like including necessary form work and finishing all exposed surfaces of concrete all as specified and shown on drawing. 128 M&L for providing precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in precast manhole cover slab,chullah hoods, chajjas and other similar articles with plain faces including necessary form work complete all as specified and as directed 129 Cutting into existing manholes for connecting new drains 150 mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specfd 130 M&L mild steel TMT bars 10 mm dia and over cut to length bent to shape required inclduing cranking bending spirally for hooping ends and binding with and incl mild steel wire (annelaed) not less than 0.90 mm dia or securing with clips. 131 INTERNAL ELECTRIFICATION 132 Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, lamp holders, bracket, light fittings, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls, floors etc as per existing complete all as specified and directed. 133 M&L for Point wiring using proper colour coding complete with 1100 Volts grade 1.5 Sq.mm, single core, PVC insulated,unsheathed cable with multistranded copper conductor with ISI mark FRLS grade, conforming to IS-694 in and including PVC medium grade conduit not less than 25mm dia. ISI marked with all accessories concealed in wall/ceiling/ floor /roof etc,sunk pressed steel/GI modular terminals boxes having 1.6 mm thick suitable for housing of modular type switches/sockets/fan regulators, including 1.5 Sq.mm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 volts grade (green colour) as earth wire, connected to common earth dolly for:- 134 One light point controlled by one switch. 135 One fan/Exhaust point controlled by one switch. 136 One three pin switch socket 5 amps outlet on same board. 137 One three pin switch socket 5 amps outlet on independent board. 138 One light point controlled by 2 way switches 139 One bell/buzzer point controlled by one push button on same board 140 M&L for Point wiring using proper colour coding complete with 1100 Volts grade 4 Sq.mm, single core, PVC insulated, unsheathed cable with multistranded copper conductor with ISI mark FRLS grade, conforming to IS-694 in and including PVC medium grade conduit not less than 25mm dia. ISI marked with all accessories concealed in wall/ceiling/ floor /roof etc,withsunk pressed steel/GI terminals boxes having 1.6 mm thick suitable for housing of modular type switches/sockets/fan regulators, including 4 Sq.mm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 volts grade (green colour) as earth wire, connected to common earth dolly for switch socket combination, 3 pin, 15 Amps on independent board all as specified and directed. 141 S & Fmodular type switch 6 Amps, one way one module complete all as specified. 142 S & Fmodular type switch 6 Amps, Two way, one module complete all as specified. 143 S & Fmodular type switch 6/16 Amps, one way one module complete all as specified. 144 S & F Modular Type Socket outlet, 6 Amps,2/3 pin combined 2 module complete all as specified. 145 S & F Modular Type Socket outlet, 6/16 Amps,combined 2 module complete all as specified. 146 S&F electric bell, ding dong AC 230Volts, single pole complete all as specified and directed. 147 S & FModular Bell push 6 Amps, modular type complete all as specified. 148 S&F ceiling rose surface bakelite 65x50mm with three terminals complete all as specified and directed. 149 Supply and fix modular fan step regulator,120 Watt - 2 modulecomplete all as specified and directed by Engr-in-chrage. 150 Material and labour forwhite cover with framesuitable for accommodating 01 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge. 151 Material and labour for white cover with frame suitable for accommodating 02 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge. 152 Material and labour for white cover with frame suitable for accommodating 03 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge. 153 Material and labour forwhite cover with framesuitable for accommodating 4 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge. 154 Material and labour forwhite cover with framesuitable for accommodating 6 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge. 155 Material and labour forwhite cover with framesuitable for accommodating 8 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge. 156 M & L for vertical type sheet steel enclouser distribution boards, double door factory made3 phase 415 volts 4 way with 200 amps rating copper bus bar of suitable size and PVC insulatedcopper jumpers from the MCCB to the out going circuits (oneincoming MCCB and 12 outgoing MCBs circuits) comprising of 3 phase 4 wireof suitable rating includingMCCB 160 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. and 12 Nos MCBs 6-32 Amps, complete all as specified and directed. 157 Supply and fixing MCB, DB,SPN,double door, IP-43,8 way with 200 A rated bus bar having earth terminal, Neutral bus terminal for 8 way circuits complete in all respect Concealed in wall including making electrical incoming and outgoing connection with legs/thimbles all as speacified and directed. 158 Supply fixing MCB, SPN,40Amp , 240 Volt, 50HZ, 10 KA, `C` series including making electrical connection with the help of legs/thimbles all as speacified. 159 Supply and fixing MCB,SP, 06 Amp to 32 Amp, 240 Volt, 50HZ, 10 KA, `B` Series, making electrical connection with the help of Lugs/thimbles all as speacified. 160 Supply and fixing 1x20 watt baton integrated LED channel tube light fitting, 230 Volt indoor housing with integral sleek extruded polycarbonate LED channel with white acrylic cover surface/wall mounting, with inbuilt electronic driver/control gear, bipin holders, connector block etc complete wth all accessaries internally pre wired and including connecting lead, three core 1.5 Sqmm from ceiling rose to tubelight fitting complete all as specified and directed. 161 Supply and fixing 2 feet 10 Watt 220V baton integrated LED channel tube light fitting, 230 Volt indoor housing with integral sleek extruded polycarbonate LED channel with white acrylic cover surface/wall mounting, with inbuilt electronic driver/control gear, bipin holders, connector block etc complete wth all accessaries internally pre wired and including connecting lead, three core 1.5 Sqmm from ceiling rose to tubelight fitting complete all as specified and directed. 162 S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. 163 S&F in repair of lamp holder PVC / polycorbonate type insulated body with back plate suitable for batten fitting / angle fitting completeall as specified and directed. 164 Supply and fix sheet metal enclosure single pole with two pin and earth plug and socket complete with one single pole MCB20 Amp complete all as specified and directed 165 M&L for submain wring using proper colour codingwith 3 runs of single core, PVC insulated,FRLS unsheathed suitable for 1100 volt, Multistranded, copper conducter cable of size 6 Sqmm drawnand including PVC conduitmedium grade not less than 25 mm dia, ISI marked concealed in wall/roof etc with required accessories complete all as speacified and directed. Note :- (i) The minium size of PVC conduct shall be 25mm however higher shall be used as per numbers of conductor to be pass through the conduit. Engr-in-Charge shallensure for proper size of PVC conduit be used at site.(ii) Seperate conduit shall be used foreach submain wiring circuit irrespective of any number of wire.(iii)3 runs of conductor and one run of conduit shall be measured as one run. 166 M&L for submain wring using proper colour codingwith 3 runs of single core, PVC insulated,FRLS unsheathed suitable for 1100 volt, Multistranded, copper conducter cable of size 4 Sqmm drawnand including PVC conduitmedium grade not less than 25 mm dia, ISI marked concealed in wall/roof etc with required accessories complete all as speacified and directed. Note :- (i) The minium size of PVC conduct shall be 25mm however higher shall be used as per numbers of conductor to be pass through the conduit. Engr-in-Charge shallensure for proper size of PVC conduit be used at site.(ii) Seperate conduit shall be used foreach submain wiring circuit irrespective of any number of wire.(iii)3 runs of conductor and one run of conduit shall be measured as one run. 167 M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised iron strip 4mm as earthing lead by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade ) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PT 1, 1991 with charcoal dust and saltcomplete and earth leadconnected to earthing test pointcompleteall as specified &testing on completion. 168 Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. 169 Taking down existing water heater 25/35 Litres capacity and depositing in MES E/M store and repair & refixing the same at its old position/location, including provision of required elements, nuts bolts and fastner, transportation etc, complete all as specified and directed. 170 Taking down existing Ceiling fan/Exhaust fan and depositing in MES E/M store and repair & refixing the same at its old position/location, including provision of required winding, synthetic enamel paint by spraying, nuts bolts and fastner, transportation etc, complete all as specified and directed. 171 EXTERNAL ELECTRIFICATION 172 Supply & fixingXLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm, 3.5 Core as directed and instructed by Engineer-in-Charge. 173 M&L sand cushioning with a layer of dry river sand 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts. Complete all as specified and directedNote: Punned down thickness (overall 18cm), shall be considered for measurement and payment. 174 M&L, locally available , sub class B bricks (old size) laid flat and dry in trenches over the cable for protectionprependicular to the direction of cable adjacent to each other complete all as specified and directed. 175 Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.
|
