|
Tender For Repair Maintenance Of B/R Portion Of E/M Installations Under Ge Banar.; 1.00 Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified. 2.00 Dismantling of damaged Barbed wire of any description and in any position removal from site of work complete all as specified. 3.00 S & F Barbed wire, Galvanized steel, 2 strand 2.24 mm dia barbed with 2mm dia bars at 75 mm spacing straining and type of standard rails, straining bolt, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc ( each line wire to be measured) complete all as specified. 4.00 Excavating in post holes (or similar holes) each n.exc 0.50 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil complete all as specified. 5.00 M & L for rolled steel section as in posts, struts and staples in fencing including cutting to top to shape (swan neck) as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting welding etc and similar work confirming to Fe-290 Gde-165 complete all as specified and directed by Engr-in-Charge. Note:- Fencing Poles will be painted before fixing. 6.00 M&L for two coats of synthetic enamalled paint over one coat of red oxide primer on new steel surfaces exc 100mm width or girth, including preparation of the surface complete all as specified. 7.00 M&L for two coats of bituminous paint on new steel surfaces exc 10 cm width or girth, including preparation of the surface complete all as specified. 8.00 All as per item No 6 above but not exc width or girth 10 cm complete all as specified. Note:- Flat iron will be painted before fixing. 9.00 M&L for PCC (1:3:6) type C2 by using 40 mm well graded stone aggregate as in foundation, filling and mass concrete complete all as specified. 10.00 Dismantling fencing wire mesh any type and any size complete all as specified. 11.00 Supply only Chain link MS galvanised fencing, any size or type, weight not less than 2.80 Kg/Sqm complete all as specified. 12.00 Fixing only chain link fencing including line wires/ MS round bar (Any numbers), any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire (Note. Supply of flat iron, MS round bar & chain link shall be measured and paid seperately under supply only) 13.00 S & F 12 mm dia MS screw bolts any size (machine made) with hexagonal or square heads at one end and screwed the other ends, fitted with washer and one one hexagonal nut exc 10cm long but n exc 15cm cmplete all as specified. 14.00 Supply only MS rounded bars Fe-290 (Gde-165) 10 mm dia and over cut to length and bend to shape as required as in tie bars, secured with nut, bolt and washers complete all as specified. 15.00 Demolition of PCC floor and pavings (un-reinfored) n.exc 15 cm thickness (below or above ground level) and including floor finishes etc complete all as specified. 16.00 M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified. 17.00 M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified. 18.00 M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified. 19.00 Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified. 20.00 M&L for square rubble walling Jodhpur type regular course well bonded bedded and solidly hearted built in cement mortar (1:6) complete all as specified. 21.00 All as per Ser Item No 20 above but except stone complete all as specified. 22.00 Extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n exc 20mm and dressing faces beds and joints as specified and square rubble walling regular course Jodhpur type complete all as specified. 23.00 Raking out joints/pointing to squarred rubble masonry, coursed or uncoursed built in cement mortar complete all as specified. 24.00 M&L for keyed pointing to stone masonry surface in CM 1:4 complete all as specified. 25.00 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. 26.00 M&L for 15mm thick rendering in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified. 27.00 M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified. 28.00 M&L for two coats of oil bound distemper on newly plastered walls over a one coat of 1mm thick JK/Birla wall putty over plastered surface to prepare the surface even and smooth and priming plastered and other surfaces including preparation of surfaces all as specified. 29.00 M&L for complete removal of existing treatment on walls, and preparation of old plastered surface of wall and applying two coats of oil bound distemper over a one coat of 1mm thick JK/Birla wall putty over plastered surface to prepare the surface even and smooth and over priming plastered and other surfaces complete all as specified. 30.00 M & L for cleaing of SWTs upto 225k capacity at Banar Military area by pumping out the accumulated water at the bottom using portable removing all the complete silt using either suction pump or manually, cleaning the walls, floor and pump removing the sludge waste, filled minor cracks if any with suitable chemical compund of STP/FOSRACK/SIKAGARD/BASF and finished with 2 coat of white wash complete all as spcified. 31.00 Material and labour for preparation of old plastered or unpastered surfaces of walls including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of cement base paint white or tinted complete all as specified. 32.00 Taking up or down steel tubing and connection including cleaning for refixing of bore 15mm complete all as specified. 33.00 Refixing old steel tubing and connections in new or old position as in walls, ceiling, floors etc bore of pipe 15mm complete all as specified. 34.00 S&F 15mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified. 35.00 Taking up or down steel tubing and connection including cleaning for refixing of bore 20 mm complete all as specified. 36.00 Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 20 mm complete all as specified. 37.00 S&F 20mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified. 38.00 S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified. 39.00 Supply and fixing in repair 15mm dia stop valves, screwed down high pressure, screwed both ends for iron pipe or for unions and fixed for 15mm bore but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified. 40.00 S&F in repair 15mm dia Stop valves, fancy type, chromium plated screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore complete all as specified. 41.00 Supply and fixing in repair, bib tap long nose screwed down high pressure, cast copper alloy,fancy type, chromium plated, ISI marked, screwed down suitable for 15mm bore pipe or union, complete all as specified. 42.00 Supply and fixed (in repair) fancy type, shower rose 125mm size , brass Chromium plated, revolving type, fixed to existing steel pipe or union 15mm bore complete all as specified. 43.00 S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified. 44.00 Supply and fixing in repair 10 ltr PVC valve less, symphonic action type dual type flushing, low level, white, with inlet ball valve, float and handle including 600mm long PVC connection and brackets complete all as specified. 45.00 Supply and fixing in repairs vitreous china squatting pan, Órrisa Patern size 580mmx440mm white with integral foot rests, embedded and set in PCC 1:5:10 type E2 (using 40mm stone aggregate) and making good to dismantled floor including removing rubbish complete all as specified. 46.00 S&F in repair 8mm thick looking mirror of size 1.00Mtr X 0.90 Mtr of selected quality glass mounted on 8mm thick AC building board or commercial plywood and aliminium angle beading around mirrior fixed on wall PVC plug and screws etc complete all as specified. 47.00 S& F Viterious china Urinal,Half stall type,white(excluding flushing cistern,flush pipe) complete incl providing for fixing plugs,bedding urinals against wall in cement mortar 1:2,securing urinal to pulge with and including 60mm long brass screw,pointing around urinal back in cement, including urinal spreader and bottole trap. 48.00 S&F in repair grating doom 100mm dia of PTMT (min weight 25 gms) complete all as specified. 49.00 S&F in repairs brass chroumium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified. 50.00 S&F in repair Stainless steel peg set of 5 size 300x25 & 2mm thick complete all as specified. 51.00 Dismantling of existing water tanks (PVC/RCC/AC) exc 250 ltr but n.exc 500 ltr capacity and removing from site complete all as specified. 52.00 Supply and fixing 500 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm brass ball valve high pressure including dismantling of the old unserviceable water tank with all accessories complete all as specified. 53.00 Dismantling floor hearth or wall tiling including cement mortar bedding (including not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. 54.00 M&L for coloured Glazed ceramic tiles in vertical surface 350x250x7mm/450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles in vertical surface including 10mm thick rendering in CM 1:4 complete all as specified. 55.00 M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floorts etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified. 56.00 Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified. 57.00 S&F steel work in tublar trusses dia in 80 mm Fe 410-W (Gde-E-250) Quality A ,including spcial shaped washer. Complete using EWR or including butt welded tubes.Dia in 80 mm complete all as specified. 58.00 Dismantling of steel sheeting Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified. 59.00 S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. 60.00 S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
|
