|
Tender For Repair, Renewal, Maintenance Internal Electrification Including Fitting, Winter Appliances And Certain Allied Work At Fatehgarh.; 1 Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such asswitches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified. 2 Taking down Aluminium sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed 3 M&L for point wiring with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLSH) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLSH) multistrandedcopper conductor cable PVC insulated and unsheathed, drawn in & including concealed/surface with PVC rigid conduit medium grade with fittings (ISI marked) not less than 20 mm dia & 1.6 mm thick sunken pressed steelgalvanised terminal boxes with top cover ISI marked plastic laminated hylam sheetfor housing/ fixingswitches etc complete all as specified and directed for the following-Note- (i)The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour. 4 One light/ holder/fan/exhaust/bell point controlled by one switch. 5 One 5 pin 5 Amp switch socket combination point on an same board. 6 One 5 pin 5 Amp switch socket combination point on an independent board. 7 All as per item 3 here in before but for one 15 Amp 5/6 Pin switch socket combination independent with2.5 Sqmm FRLSHunsheathed copper conductor single core multistranded complete all as specified and directed. 8 S&F of Modular switch one way 6A, 1 module complete all as specified and directed. 9 S&F of Switch Piano flush type 5 Amp single pole one way complete all as specified and directed. 10 S&F ofModular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. 11 S&F ofswitch socket combination 2 in 1flush type 5 Amp 5 Pin complete all as specified and directed. 12 S&F ofModular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. 13 S&F of switch socket combination 5 in 1, 15 Ampflush type complete all as specified and directed. 14 S&F of modular type Fan step regulator, 120W - 2 module complete all as specified and directed. 15 S&F of electronic fan regulator 5 stepped type complete all as specified and directed 16 S&F of ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed. 17 S&F of MODULAR white or Ivorycover plate with frame, 3 module complete all as specified and directed. 18 S&F of MODULAR white or Ivorycover plate with frame, 4 module complete all as specified and directed. 19 S&F of MODULAR white or Ivorycover plate with frame, 8 module complete all as specified and directed. 20 S&F of Metal Flush box 3 module complete all as specified and directed. 21 S&F of Metal Flush box 4 module complete all as specified and directed. 22 S&F of Metal Flush box 8 module complete all as specified and directed. 23 S&F of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. 24 S&F of Call Bell Ding DongAC 230 volts complete all as specified and as directed. 25 S&F of Bell Push AC 230volts complete all as specified and as directed. 26 M&L for sub main wiring with two single core 6.0 Sqmm FRLSH copper conductor PVC insulated and unsheathed cableincluding PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm FRLSHinsulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified.(Note :-Two runs of 6.0 sqmm FRLSH and one run of 6.0 sqmm FRLSH copper conductor shall be measured as one unit length.) 27 M&L for sub main wiring with two single core 4.0 Sqmm FRLSH copper conductor PVC insulated and unsheathed cableincluding PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 4.0 Sqmm FRLSHinsulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified.(Note :-Two runs of 4.0 sqmm FRLSH and one run of 4.0 sqmm FRLSH copper conductor shall be measured as one unit length.) 28 S&F in replacement of VTPN DB 12 way suitable for Mounting MCCB as Incomer of rating 200 AmpVertical distribution board with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including connection as required complete all as specified & directed. 29 S&F in replacement of MCB distribution board SPN 240 Volt 12 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection as required complete all as specified & directed. 30 S&F in replacement of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection as required complete all as specified & directed. 31 S&F in replacement of MCCB 160 Amp, 16KA,4 Poleincluding complete electricalconnection complete all as specified and directed 32 S&F in replacement of MCCB 100 Amp, 16KA,4 Poleincluding complete electricalconnection complete all as specified and directed 33 S&F in replacement of MCB SPN 32-40 Amp, 10 KA, 240 volt Ccurve complete all as specifed and directed. 34 S&F in replacement of MCB of MCB SP6 to 32 Amp 240 Volt C curve 10 KA complete all as specified and directed. 35 S&F of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and directed. 36 S&F in repair of LED lights fitting 4 Ft, 20W, 220V, AC, batten type, including LED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 37 S & F in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC batten type including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed 38 S&F in repairLED luminaire 600 mm x 600 mm, 36/ 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. 39 S&F in repair round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 40 S & F in repairBuilding security LED Light 30/35 Watt made up pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-66 protection and impact resistance of IK 07 for building secuity purpose with bracket size made of GI pipe medicum grade 32 mm dia 1.5 mtr long bend to shape as required and fixing with two nos MS Clamp of size 40x6 mm for fixing of builiding security light fittings completed all as specified and directed. 41 S & F in repair of LED lamp 9 watt B22 completed all as specified and directed. 42 S&F in repair of LED decorative wall light fixture made up of Polycarbonate, suitable for 09W TU retrofit CFL (B-22 base) including LED bulb 09 Watt of colour temp 3000K & luminaire lumen >1000 lm complete all as specified and directed. 43 S & F in replacement LED light fitting 1x9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 44 M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth wire4 mm dia by means of bolts, nuts, check nuts, and washers of galvanised iron or steel all as shown in electrical plate No - 3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but without earth lead protection pipe and test on completion after dismantling unserviceable erthing (above GL only) complete all as directed incl dismantling of exsisting earthing. ( Note :-On testing after completion if desired earth resistence is not obtained, the earthing will be redone at no extra cost.) 45 Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip armoured service cable pole to building electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 Core incl dismentaling complete all as specified and directed. 46 All as per item 42.00 here in before but of size 50 Sqmm 3.5 Core 47 S & F in of 40 mm bore GI Tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection with suitable size of MS Clapms and nut and bolts/washer complete all as specified and directed. 48 M & L Sand cushioning for cables complete all as specified and directed . 49 M & L for old size brick well burnt, laid flat, for cable protection complete all as specified and directed. 50 Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in any type of soil complete all as specified and directed. 51 Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any type of soil complete all as specified and directed 52 Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed 53 S&Fin replacement of 3 phase multi-function meter LCD display 3x240V, 3X (20100)Amp, 50 Hz, 3200 Imp/kWh, class - 1.0, ISI mark (20100) Amps with cover box including necessary connection complete as directed. Make : Genus/HPL/L&T. The contractor should deposit the Old U/S meter to E/M store yard. 54 Taking down carefully storage type water heater (Geysers) of any make of 50 litrs capacity at any height opening for inspection complete including heating element inner copper tank etc de-scalingcleaningand re-assembling of Geysers after necessary repairs carrying out and re-fixing in same position (spares parts as required for repair/replacement geyser are measured and paid separately under supply only item) including making good to walls with CM (1:3) or PCC (1:2:4) and plastering the wall surfaces with CM 1:6and replacement of old nuts, bolts and rubber gasket etc all as specified & directed.Note:- Spares replaced shall be measured and paid seperately under respective items of thisSchedule as supply only. 55 All as per item No.51 above but of capacity 25 ltrs 56 Supply only of 1.5 KW Heating Element, Push/ Screw type with ‘O’ ring complete all as specified and directed. 57 Supply only of2.0 KW Heating Element, Push/ Screw type with ‘O’ ring complete all as specified and directed. 58 Supply only of 2.0 KW Heating Element, Push/ Screw type with ‘O’ ringwith and including aparatus plate assembly suitable for Racold Make geyser as per sample complete all as specified and directed. 59 Supply only of Geyser assembly suitable for 25 ltr capacity ISI marked complete all as specified & directed. 60 Supply only of Geyser assembly suitable for 50 ltr capacity ISI marked complete all as specified & directed. 61 Supply only of thermostate suitable for 50 Ltr Geyser ISI marked complete all as specified & directed. 62 Supply only of thermostate suitable for 25 Ltr Geyser ISI marked complete all as specified & directed. 63 Supply only of inner tank made of steel suitable for 25 Ltr geyser complete all as specified & directed. 64 Supply only outertank made of steel suitable for 25 Ltr geyser complete all as specified & directed. 65 Supply only LED indicating lamp 230 volts 50 HZ AC suitable for geyser any type (round,squire or rectangular type) any capacity complete all as specified & directed. 66 S&F in replacement hot water supply CPVC/PVC connection pipe of size 450mm long heavy duty with check nut for 15 mm dia pipe ISI marked complete all as specified and directed. 67 Supply in replacement safety pressure/air lock valve suitable for geyser 25/50 Ltrscapacity complete all as specified and directed. 68 M&L for sub main wiring with two single core 4 Sqmm (FRLSHH)copper conductor PVC unsheathed cable medium grade in existing PVC conduit concealed in wall for sub main connection including 4 Sqmm (FRLSH) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly including dismantling and resurfacing the disturbed surface all as specified & directed. (Note :-Two runs of 4 sqmm (FRLSH) and one run of 4 sqmm (FRLSH) copper conductor shall be measured as one unit length.) 69 Dismantling complete solar water heating system of capacity 300 LPD per day including hot & cold water pipes and hot water tank complete. Repairing the system fixing back in position and testing complete all as specified and as directed.Note:- Rates quoted by the contractor shall deemed to be included for:- (a) Making good the worn out missing nuts bolts, washers, union sockets, flanges and screws etc. (b) Cleaning hot and cold water tanks. 70 All as per item No.66 above but for200 LPD 71 S &F in repair of 15 mm bore GI tubing medium grade with screw, socket joints with all fittings/fixtures like bends, sockets, unions, nipples etc on wall or floor including making alterations in existing /new pipes as required complete all as specified and as directed. 72 S&F in repair 15mm dia bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipecompleteall as specified and as directed. 73 Supply and fixing in repair of Angle stop valves of any colour high pressure screwed for iron pipe and fixed for 15-20 mm bore pipes.
|
