Tender For Additional / Alternator Of Vintage Building At Inf School Mhow in India

Work Detail

Tender For Additional / Alternator Of Vintage Building At Inf School Mhow; 2 Item No 01 : Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar 3 Item No 02 : Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing )and rubbish off the primeses complete all as specified 4 Item No 03 : M&L for scratch free Glazed (Porcelain) Vitrified Tiles (GVT)/ Polished Glazed Vitrified Tiles (PGVT)10mm thick (square or rectangular) area of each tile exceeding 0.36 sqmbut not exceeding 0.72 sqm ( ie)size 600x1200 in floors etc set and jointed in neat cement slurry and pointed incoloured cement to match with colour of tileover and including 15mm thick screed bed or bedding layerin cement mortar 1:6 complete all as specified and as directed. 5 Item No 04 : All as per item No 03above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified 6 Item No 05 : M&L for scratch free Vitrified Tiles 9mm to 10mm thick (square or rectangular) area of each tile exceeding 0.18sqmbut not exceeding 0.36 sqm (ie) ofsize 600x600mm in floors etc set and jointed in neat cement slurry and pointed incoloured cement to match with colour of tileover and including 15mm thick screed bed or bedding layerin cement mortar 1:6 complete all as specified 7 Item No 06 : All as per item No 05above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified 8 Item No 07 : M&L for glazed ceramic coloured tiles of size not less than 300x450x7 mm thickon vertical surfaces such as wall ,dado,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thick backing coat on fair faces of brick work in CM 1:4 complete all as specified 9 Item No 08 : M&L for non skidceramic colouredtiles 7mm to 8mm thick (square/rectangular)of size 400x400mm in floors etc set and jointed in neat cement slurry and pointed in white or colouredcement to match with colour of tileincluding 15 mm thick screed bed or bedding layer in cement mortar 1: 6 complete all as specified 10 Item No 09 : M&L for non skidceramic colouredtiles 7mm to 8mm thick (square/rectangular)of size 300x300mm in floors etc set and jointed in neat cement slurry and pointed in white or colouredcement to match with colour of tileincluding 15mm thick screed bed or bedding layer in cement mortar 1: 6 complete all as specified 11 Item No 10 : M&Lfor machine cut kota stone slab inflooring 18-20 mm thick laid over and including 20mm thick screed bed in cement mortar1:6 and pointed withcement mixed with pigment to match with the shade of slab including rubbing and polishing complete all as specified 12 Item No 11 : All as per item No 10above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified 13 Item No 12 : M&Lfor 18- 20 mm thickGranite slab work (table rubbed and polish) of approved quality ofrequired sizein floor,wall,cooking platform and like beddedand jointed in greycement slurry and pointed with coloured cement (1:2) usig marble dustwith admixture of pigment to match the shade of granite stonelaid over and including 20 mm thick screed bed in cement mortar 1:6including polishingby using mechanical grindercomplete allas specified anddirected. 14 Item No 13 : M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor, etccomplete all as specified and directed 15 Item No 14 : M&Lfor 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colourconferming to IS 15658-2006 andincluding joints filled with sandcomplete all as specified and as directed. 16 Item No 15 : M&L for Sand filling under floors or in foundations including watering and consolidation 17 Item No 16 : M&Lfor chequered cement concrete tiles with grey cementand pigment of size 20cmX20cmX25 mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 20 mm thick screed bed in CM 1:6complete all as specified 18 Item No 17 : M&Lfor chequered cement concrete tiles with grey cementand pigment of size 40cmX40cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 20 mm thick screed bed in CM 1:6complete all as specified 19 Item No 18 : Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specified complete all as directed. 20 Item No 19 : M & L 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified anddirected. 21 Item No 20 : Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified 22 Item No 21 : S&F PVC false Ceiling incldingframe workfor fixing ofPVC false ceiling. PVC false ceiling shallconsist of hollow profile PVC sheets witha thickness of 8 mm to 10 mm fixed on framewith 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre on GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finishCeiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed. Note: Placing of false ceilling is to be carried out upto 5.00m height in Classrooms.The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary arrangement work etc required at site. 23 Item No 22 : S&F Gypsum Board 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre inc grid and fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre on GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finishCeiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed. Note: Placing of false ceilling is to be carried out upto 5.00m height in Classrooms.The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary arrangement work etc required at site. 24 Item No 23 : S&F for anodised aluminium snap grid size (605mmx605mm) frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.Note:Ceilingis to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc as required. 25 Item No 24 : M&L for Exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified. 26 Item No 25 : M&L for Exposed metal frame ceiling with 6mm Semi perforatedcalcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified. 27 Item No 26 : M&L for Solid PVC Wall Lining consisting of 5mm thick wood grain printedPVC sheet inclusive of solvent cement and fixing at site on PVC frame workconsisting of 5mm thick PVC sheet fillet of width 35mmfixingonwall @ 30 cm c/c horizently as well as verticallyto make PVC Frame as per specification , complete all as per manufacturer instruction. 28 Item No 27 : Demolition of brickwork built in cement mortar or cement lime mortar including all quoins arches pillars etc complete all as specified and directed. 29 Item No 28 : M&L for brick work with sub class B bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6., etc complete all as specified and directed. 30 Item No 29 : M & Lfor brick work with sub class B bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick walls complete all as specified anddirected. 31 Item No 30 : Taking down Cement Plaster of any description on Brick or Stone walls or Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water,etc. complete removal of debris outside MD land. 32 Item No 31 : M&L for Complete removal of old treatment on internal/External surfaces of wall & celling by scrapping and washing etc by Mechanical means completeall as specified.Note : Scraping/Removing is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc required at site. 33 Item No 32 : M&L for rendering 15mm thick cement plaster in CM 1:6 onfair faces of brick /stonework or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed. 34 Item No 33 : M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick/stone or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified anddirected.(Note:- Liquid water proofing compound to be measured paid separately) Note: Placing of false ceilling is to be carried out upto 5.00m height in Classrooms.The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary arrangement work etc required at site. 35 Item No 34 : M&L for rendering 5 mm thick in ceiling CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. Notes- Plaster height upto9.0 mtr 36 Item No 35 : Supply only liquid water proofing Compound and applying@ 200ml per beg of cement complete all as specifed and directed. 37 Item No 36 : M&L for preparing Old plastered surface of walls and applying two coat of oil bound distemper white or any tint etc complete as specified and directed 38 Item No 37 : M&L for preparing Old plastered surface of walls and applying one coat of oil bond distemper white or any tint etc complete as specified and directed 39 Item No 38 : M&L for preparing new plastered surface of walls and applying Two coat of oil bond distemper white or any tint etc over and includinga coat of chalk whitening as primimg coat ,complete as specified and directed 40 Item No 39 : Material & Labour for preparation of old plaster surfaces to external wall by providing water proofing treatment by applying one base coat of Raincoat With Dr FIXIT or equivalant over and including a coat of Prime Seal primer (Dr FIXIT) including plastering if required and making the surface fit for application of exterior waether proof water base emulsion paint complete all as directed and specified. Note:Treatment is to be carried out upto 15.00m height over Chhajja/Wall/Roof .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc required at site. 41 Item No 40 : M&L for preparation of plaster/Putty surface of Brick/stone walls and applying a priming coat of exterior weather proof primer applied Min @ 2.20 kg/10 sqm on External walls by spray and finished the surface even and smoothcompleteall as specified and directed. Note:(1) Painting is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc as required.(2) Primig coat should be done as per manufacturer reqmt of weather proof paint. 42 Item No 41 : M&L for two coats of Exterior weather proof acrylic Emulsion paint (Two or more coat applied @ 1.67 ltr/10 sqm) using roller/spray and make the surface smooth all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge Note:- putty shall be measured separately & Periodicalis to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc required at site 43 Item No 42 : Finishing wall with texture interior paint of required shade on external old/new wall (Two or more coats applied @ 3.28 ltr/10 sqm) surface over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm all as specified and directed by Engr in charge. 44 Item No 43 : M&L for preparation of newly plastered surface of wall and and applying2 mm thickwall careputty in two coats(each coat not less than 1mm thick )and surface finished even and smooth with sand paper completeall as specified 45 Item No 44 : M&L two coats of white washing on newly plastered / concrete celling sufaces incuding preparation of surfaces. Note :- (a) The contractor is advised to visit the site before quoting the tender. (b) The rate quoted by contractor will deemned to be inclusive of necessary arrangement work etc required at site. 46 Item No 45 : Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each. 47 Item No 46 : Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each. 48 Item No 47 : Taking down shutters of any description exc 1 Sqm and n.exc 2Sqm each . 49 Item No 48 : S & F Second class hard wood plain, solid, straight chawkats and frames, wrought, framed rabated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as directed and specified. 50 Item No 49 :S& F for Pressed steel frames size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed 51 Item No 50 : S& F for Pressed steel frames size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed 52 Item No 51 : M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregate as in bed blocks, coping, for fixing holdfast/lugs,filling hollow space of pressed steel door frame etc including necessary form work all complete as specified and as directed. 53 Item No 52 : S&F35 mm thick second class hard woodplain framed factory made panelled shutter with lock rail and panel of 12 mm BWP commerical ply . The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. 54 Item No 53 : S & F 35mm thick, second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) and as directed. 55 Item No 54 : M&L for preparation of new wooden surfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer, transparent, and bringing forward surfaces to smooth even finish, comlete,all as specified 56 Item No 55 : M&L for Preparation of Old painted surface of Wood of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed. 57 Item No 56 : S&F For 375 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate andtwo on staple plate and fixed 58 Item No 57 : S&F for 300 mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 59 Item No 58 : S&F for 150 mm Cast iron or malleable cast iron handles, cast type, stove enamelled black 60 Item No 59 : S&F for 150 mm Butt hinges, heavy weight, cold rolled mildsteel, and fixed 61 Item No 60 : S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. 62 Item No 61 : S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified . 63 Item No 62 : S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as directed and specified. 64 Item No 63 : M&L for floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as specified 65 Item No 64 : S&F Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. 66 Item No 65 : Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1;2:4 type B1 exceeding half brick but not exceeding one brick all as specified and as directed. 67 Item No 66 : S & F in repair curtain rails 20 mm dia, decorative type, stainless steel including fixing brackets in both sides fancy type complete all as specified and directed.. 68 Item No 67 : S&F powder coated aluminium frame work as in door shutter, windows , ventilators, partitions with one or more rebates sections of approved tint as required for partitions including beading, cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/ beams etccomplete all as specified 69 Item No 68 : S & F Powder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) shall be oftwo parts and upper patr shall be three movable shutterand lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed.(ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(Min)(iii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(Min)(iv)4 mm thickglass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi)Locking cleats per shutter -01 Nos.(Min)(vii)Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steelwire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix)fixing screw for frame with wall per windows- 08 Nos. 70 Item No 69 : S & F powder coated aluminium ventilator of frame having cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. 71 Item No 70 : S&F in repairpower coatedaluminium door shutters, aluminium section weighing min weight 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. . 72 Item No 71 : S&F 4.8 mm thick plain or Frosted glass, ordinary quality including rubber gasket for packing and fixed to uPVC/ aluminium doors/window/partition incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed. 73 Item No 72 : M&L for 3mm thick Aluminium Composite Panels (ACP) any colour offor fixing in Alumimium door/partition//Wall Lining/Ceiling with all other necessary accessories for fixing complete all as specified and directed. 74 Item No 73 : S & Fstainless steel wire cloth of0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed. 75 Item No 74 : S&F aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed. 76 Item No 75 : S&F Framed work such as grills, gratings, guard bars for windows, and ventilators,barred iron work, ladders, framework of water tanks and similar work. 77 Item No 76 : S&F factory made 30 mm thick 100% solid WPC (wood polymer composite) laminated flush door shutter of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade), Calcium carbonate and natural fibers ( Wood powders / rice husk/wheat husk) and non toxic additives made from extension process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 kg kg/cum, an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 200 N (Face) & 1100 N (Edge) minimum compissive of 50N/mm2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category property of being Termite/ borer free, water/ moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws including necessary Locking arrangement complete all as specified and as directed.Note-:(a)Colour/Texture Style of Door/Prelam Sheet shall be approved by GE (b)Test certificate from original Manufactuer shall be provided before incorporation in the work site. 78 Item No 77 : S&F factory made 100% solid WPC (Wood polymer composite) Door frame 65mm X 100mm (Moulded) single rebated made from wood polymer composite (single extruded process material comparison of virgin PVC polymer of k value 57-60 (Suspension grade), calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 750 kg/ cbm, an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of (Min 990 N ), minimum compressive strength of 58n/mm2, Modulus of elasticity 900N mm2 and resistance to spread of flame of class A category with property of being Termite/borer proof, water/ moisture proof and fire retardant & fixed with position with SS dash fasteners / Hold fast of required dia and length, all as per specifications drawings as directed. 79 Item No 78 : S&F Veneered decorative 4mm mm plywood, grade 1 (with BWR resin) with decorative laminate min 1mm thick on both faces, fixed with screws to timber frame work as in cupboard shelf/partition including taking down the existing structure / board on site all as specified . 80 Item No 79 : S&F for 18 mm thick factory made PVC sheet (having density not less than 450 Kg/Cum) one side pre-laminated sheet as inktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed. 81 Item No 80 : S & F for factory made PVC shelf/partition of required size consisting of panel of18 mm thick ofrequired size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm widht x 1 mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc. complete all as specified. 82 Item No 81 : S&F stainless steel shelf closing hinges 75 mm size for PVC door shutters complete all as specified and directed 83 Item No 82 : S&F 50 x 15 mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed . 84 Item No 83 : S& F 100 mm size MS mat/glossy finish handle complete all as specfied and directed . 85 Item No 84 : Taking up or down steel tubing and connections for bore of tube 15 mm, complete all as specified and directed. 86 Item No 85 : Taking up or down steel tubing and connections for bore of tube 20 mm, complete all as specified and directed. 87 Item No 86 : S& F in repair Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) of two layer hoisted and fixed in position all as specified in SSR part Icomplete all as specified and as directed. 88 Item No 87 : S&F in repairs incl hoisting HDPE plastic water cylindrical vertical type tanks closed top of capacity 500Ltrsincl 20mm bore brass stop cock and 20mm bore brass float valve with polythene float complete all as specified. 89 Item No 88 :S&F 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors inc all fittings complete all as specified. 90 Item No 89 : All as per item no 88 above but 20mm bore complete all as specified and as directed. 91 Item No 90 : Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc and hoisting if required and re-fixing in positionexc 500 & n. exc 1000 litres capacity 92 Item No 91 : S&F in repair CP pillar taps(swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specifiedand directed 93 Item No 92 : S&F fancy typeCP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified. 94 Item No 93 : S&F fancy type chromium plated15mm boretwo way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. 95 Item No 94 : S & F CP toilet paper holder complete all as specified and as directed. 96 Item No 95 : S&Fvitreous china wash down water closet pedestalpattern white excluding flushing cistern and flush pipes complete all as specified and as directed . 97 Item No 96 : S&FPVCvalve less,syphonic action type flushing cistern,low level, white with inlet ball valve,float and handle including flush pipe, bracketsand connection to pipe and fixing of chainand pull or lever if any complete all as specified and directed. 98 Item No 97 : S&F Health faucetmild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified 99 Item No 98 : S&F in repair vitreous china wash hand basin, Oval counter top of size 630 x 500 mm with all fittings and fixture complete including brass coupling 32 mm etc. (Cat No- 10045 Pastel ofMake : Hindware or equvalent for oval type wash hand basin ) 100 Item No 99 : S & F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete.. Note :- Pillar tape shall be measured as supply only under respective item 101 Item No 100 : S&F in repairsvitreous china urinal bowl urinal flat back, size of 465x355x265mm white (min)with grating and union for discharge pipe, CP urinal spreader with waste pipe and all fiting for urinal.complete all as specified and as directed 102 Item No 101 : S & F PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed. 103 Item No 102 : S&F 600x450mm beveled edge mirror of selected quality glass mounted on PVC framed and fixed to wooden plug with CP screw and CP washer ccomplete all as specified and directed. 104 Item No 103 : S&F PVC connection15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed. 105 Item No 104 : S&F for 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed 106 Item No 105 : S & F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. 107 Item No 106 : S & F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. 108 Item No 107 : S & F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. 109 Item No 108 : S & F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. 110 Item No 109 : S& F 32 mm brass chromium platedBottle trap for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and caps and fixed,complete all as specified and directed. 111 Item No 110 : S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 20mm-210 gms) complete all as specified and as directed 112 Item No 111 : Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc complete all as specified 113 Item No 112 : Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified 114 Item No 113 : S&F 0.50mm thick (including coated thickness) pre-colourpre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa asin roof sheeting / sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed. 115 Item No 114 : S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall Ridge/Valley gutter fixed with self tapping screws as specified 116 Item No 115 : M&L infor MS steel Hollow Sectionwork in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 andIS-1161-1979 grade ST-240 complete all as specified and as directed. 117 Item No 116 : S&F mild steel hollow ,Joist, channel, angle,tee or tubular Sectionwork in tubular trusses, purlins, rafter, tubular column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 andIS-1161-1979 grade ST-240 complete all as specified . 118 Item No 117 : Preparation of newlysteel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete complete all as specified and as directed 119 Item No 118 : M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping)etc rough finished surface of concrete complete all as specified 120 Item No 119 : M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified 121 Item No 120 : M&L for RCC M-25 grade concrete (Nominal Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified.NOTE: Reinforcement shall be measured and paid separately under relevant item. 122 Item No 121 : Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removingdebris to a distance exc 500 mtr but not exc 1.50 Km etc complete all as specified and as directed 123 Item No 122 : M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, roof padding/staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed 124 Item No 123 : M & F forAPP based polymeric membrane having minimum weighing 3.8 to 4 kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application andincluding applying two coat of bituminous based aluminium paint over APP based polymeric membrane @ 0.20 Kg per Sqm in two coats,complete all as specified 125 Item No 124 : M&L for 10 mm thick rendering in CM 1:3 with WPC @ 3% on fair faces of brick work or concrete surface finished even & smooth without using extra cement (Note : WPC to be paid seprately) complete all as specified and directed. 126 Item No 125 : Supply only liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved. 127 Item No 126 : M & L for preparation of surfaces and applying bituminous basedprimer (conforming to IS-3384-1965) @ 0.30 Kg/Sqmtill the roof surfaces is properlyintregnated ,complete all as specified and as directed. 128 Item No 127 : Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made 129 Item No 128 : Taking down and refixing shutters(of any description and any size ) in same opening ,complete removal of old treatment ,finish the surface withone coat of primer and 2 coat of PU spray paint ,fixing in same opening complete all as specified and directed 130 Item No 129 : S&F 12 mm thick frosted toughned glass door shutter inc with fixed on patch hinges/pivot for smooth functioning in door shutter inc stainless steel handle of 8 inches long anfd mortice locking arrangement complete all as specified and directed 131 Item No 130 : Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed 132 Item No 131 : M&L 100mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed 133 Item No 132 : S&F 100mm dia CI bend with oval access door (any radius) diminishing pieces or tapers as required complete all as specified and directed 134 Item No 133 : M&L 75mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed 135 Item No 134 : S&F 75mm dia CI bend with oval access door (any radius) diminishing pieces or tapers as required complete all as specified and directed 136 Item No 135 : S&F Cast iron cowls 75mm complete all as specified and directed 137 Item No 136 : M&L for two coat of painting with Dr Fixit fast Flex (or equivalent) water proofing liquid including preparation of new plastered surfaces complete all as specified and as directed. 138 Item No 137 : Grinding and mirror polishing of oldkota stone flooring /marble flooring includingwax complete all as specified and directed. 139 Item No 138 : Providing Factory Made 18mm thick 100% Solid CNC CUT WPC ( Wood polymer Composite ) Plain Jali of required size & approved design, comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction. 140 Item No 139 : Taking down and refixing of 75 mm CI pipe(any size ) in same openingcomplete removal cleaning, finish the surface, fixing in same opening Inc all fittings complete all as specified and directed 141 Item No 140 : Taking down and refixing of 100 mm CI pipe(any size ) in same opening, complete removal cleaning, finish the surface ,fixing in same opening complete all as specified and directed 142 Item No 141 : Taking down copper /aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc.Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces ofwalls, floors etc. 143 Item No 142 : Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan bladesand deposit to MES store yard of AGE E/Mcomplete all as specified and as directed. 144 Item No 143 : Taking down carefully copper/aluminium Sub main wiring of any size fromsurface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. 145 Item No 144 : Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site. 146 Item No 145 : Taking down Serviceable LED fitting of any typeafter disconnecting all necessary electrical connections from ceiling roseand deposit to MES store yard of AGE E/Mand after completion of work same Servicable LED fitting will be fitted on same location complete all as specified and as directed. 147 Item No 146 : Labour only for refixing the celing fan/ Wall fan/ Exhaust fan obtained from item No 2 above with replacement of unsv3 corePVC insulatedPVC sheated 3 core multistrandedcopper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed. 148 Item No 147 : M&L for removing carefully window/Split AC and depositing to MES store yard/depositing to user concerned as directed at site and refixing to the same location after all cementing and plastering work of building incl re-connection of copper refrigerant piping, filling of refrigerant gas, making it functional to achieve cooling parameters all as specified and directed. Note : Amount for addl Refrigerant copper piping shall deemed to be included in the quoted rate.The rate also inclusive of making the ACs functional with OEM staff for full satisfaction of Engr in charge and user concerned. 149 Item No 148 : M & L for Point wiring using approved colour coding as as per IS in repairs with FR-LSHPVC insulated PVC unsheathed electriccable 1100V grade ISI 694 marked down through single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping will be used) & 1.5 sqmm green FR-LSH PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet/Modular Boxesfor mounting switches, sockets, fan regulators etc for the following 150 (a) One light point/fan/ Bell point controlled by one switch 151 (b) One 5amps socket out let point controlled by one switch on same board with other switches. 152 (c) One 5amps socket out let point on independent board controlled by one switch. 153 Item No 149 : All as per item No- 148 here in before but using FRPVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green FRPVC insulated cable for 15 amps socket point on independent board controlled by one switch. 154 Item No 150 : M & L for Point wiringusing approved colour coding as as per ISin repairs with FR LSH PVC insulated and unsheathed electric cable 1100 volts grade single core having multistranded copper conductor of 1.5 Sqmm nominal cross sectional area for phase & neutral, drawn in and including non metallic rigid PVC Conduit Pipe /casing caping not less than 25mm base size with all fitting and fixing accessories and with 1.5 Sqmm green FR LSPVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor connected to earth dolly by providing suitable lugs including galvanised/wooden boxes of suitable size with white laminated bakelite sheet/Modular Boxes for mounting switches,sockets etc complete for the followings. 155 (a) One light/ fan/ bell point controlled by one switch 156 (b)One 5amps socket out let point controlled by one switch on same board with other switches. 157 (c) One 5amps socket out let point on independent board controlled by one switch. 158 Item No 151 : All as per item No -150 here in before but using FR LS insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green FR LS PVC insulated cable for 15 amps socket point on independent board controlled by one switch. 159 Item No 152 : Description all as per item No 150here in before butusing 4.0 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for geyser point/AC point connecting to metal plug and socket DB incl necessary running of4.0 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC point) 160 Item No 153 : Supply and fix in repairs Modular Switchflush type 6 Amps single pole, one waycomplete including taking down the existing all as specified. 161 Item No 154 : Supply and fix in repairs Modular Socket outlet, multi purpose, 2/3 Pin combined 6 Amps flush typecomplete including taking down the existing all as specified. 162 Item No 155 : Supply and fix in repairs ModularBell push flush type,6 Ampscomplete all as specified. 163 Item No 156 : Supply and fixin repairs Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socketcomplete including taking down the existing all as specified. 164 Item No 157 : Supply and fixin repairs ModularSwitch 16 Amps single pole, one waycomplete including taking down the existing all as specified. 165 Item No 158 : Suply and fixfor Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed 166 Item No 159 : S & F for for Lamp holder, PVC body of brass suitable for batten fitting completes all as specified. 167 Item No 160 : S & F for Ceiling rose, surface Bakelite suitable ISImarked for batten fitting complete all as specified 168 Item No 161 : S & F for Inverter type LED 9 watt LED lamp, complete all as specified and directed. Make : Philips/ Bajaj/ Crompton 169 Item No 162 : S & FEnergy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation andnecessary mounting arrangements , provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. 170 Item No 163 : S&F in repairs LED Decorative wall mounting light fitting 10W recess mounting type, complete incl LED Lamp 10 W, duly connection with coppercable etc. 171 Item No 164 : Supply and fix in repairsintegrated LED tube light fitting 1x18/20 Watt, 6000Kcomplete fitting with all accessories duly connection with three core flexible coppercable duly fixed on two nos of PVC square boxes including taking down the existing complete all as specified and directed. 172 Item No 165 : Supply and fix in repairsintegrated LED tube light fitting 1x9/10 Watt, 6000Kcomplete fitting with all accessories duly connection with three core flexible coppercable duly fixed on two nos of PVC square boxes including taking down the existing complete all as specified and directed. 173 Item No 166 : S & F for Energy saving new generation Surface / recess mounting LED light fitting luminaire 600MM X600 MM with high power LEDs and electronic driver of capacity 36 watts with pre wired andnecessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting complete all as directed. 174 Item No 167 : S&F in repairs LED round light fitting 15W recess/surface mounting type, white light LED or warm light LED 6500K as per site requirment complete with driver duly connection with coppercable etc.Note :- Ceiling cutout ø 180 mm, height 23 mm ±1 mm for 15 W 175 Item No 168 : S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts with pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm diamedium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed. 176 Item No 169 : M & L forSub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 10 Sq mm nominal area and drawing intoPVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etc one run of PVC insulated with 10 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- four runs of 10 sqmm cable,one run of 10 sqmm cable and one run of PVC conduit will be measured as one unit 177 Item No 170 : M & L forSub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing intoPVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit 178 Item No 171 : Supply and Fixin repairs flush mounting factory made Vertical TPN DB,12wayIP-43 Protection -IK 08,with metal doubledoor with 200 Amps rated copper busbar with 2 neutralbar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing withprovision of sapce for TP/FP 100-125 amps G FrameMCCB as incomer and TP/SP MCBs as out going 12/36 way complete all as specified and directed. 179 Item No 172 : Supply and Fixin repairs flush mounting factory made Vertical TPN DB,8 way IP-43 Protection -IK 08,with metal doubledoor with 200 Amps rated copper busbar with 2 neutralbar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing withprovision of sapce for TPN 63 ampsMCB as incomer and TP/SP MCBs as out going 8 way complete all as specified and directed. 180 Item No 173 : Supply and fixin repairs double door TPN DBs four wayof powder coated DBs suitable for MCBs fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed. 181 Item No 174 : S & F for sheet metal enclosure MCBDBSPN12 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 182 Item No 175 : S & F for sheet metal enclosure MCBDBSPN8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 183 Item No 176 : S & F for metal clad box suitable for 230 volt 50 Hz for AC connection three pin and socketwith MCB SP 20/32 Ampsincluding removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed 184 Item No 177 : S & F MCCB 415volts 25 KA suitable for fixing on DB of capacity 100-125Amps with extended terminals complete all as specified. 185 Item No 178 : S & FforMCB tripple pole and neutral rated capacity 63 A, 415V breaking capacity 10 KA complete all as specified and as directed. 186 Item No 179 : S & F for MCB Single pole and neutral rated capacity 5 to 32 A, 240 V breaking capacity 10 KA complete all as specified and as directed. 187 Item No 180 : S & Ffor MCB Single pole rated capacity 5 to 32 Amps, 240 V breaking capacity 10 KA complete all as specified and as directed. 188 Item No 181 : Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan basecompelte all as specifiedand directed.(Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be includedin overall rate quoted) 189 Item No 182 : S&F fix fresh Air fan,metal body AC single phase, 230 V of size 300 mm sweep ventil air DSP green type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall or fixing in aluminium fabricated windowsincluding provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and includingmaking suitable size ofhole to existing brick wall for mountingfan baseand making good the same as per existing compelte all as specified 190 Item No 183 : S&F fix fresh Air fan,steel body AC single phase, 230 V of size 450 mm sweepcomplete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall or fixing in aluminium fabricated windowsincluding provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and includingmaking suitable size ofhole to existing brick wall for mountingfan baseand making good the same as per existing compelte all as specified 191 Item No 184 : S&F brushless direct current motor (BLDC) ceiling fans complete with blades(03Nos), suitable length ofdown rods, with remote control and accessories , 230 V, 50 Hz, 1200 mm sweep, Minimum air delivery 210 CFM with service value greater than 6.00 BEE, Five star ratedincluding providing electrical connection from ceiling rose to fan terminal and write down MES Number on fan by black paint/Marker complete all as specified and directed. 192 Item No 185 : S&F Wall mounting fan of sweep fans complete with fixingaccessories , 230 V, 50 Hz, 1400 mm sweep, including providing electrical connection from ceiling rose to fan terminal and write down MES Number on fan by black paint/Marker complete all as specified and directed. 193 Item No 186 : S&F GI perforated Cable trayof size 50 mm casing fittings incl base trench and cover complete with fixingaccessories on surface of wall including laying ofelectrical and comunication/ telephonic cable terminal and write down MES Number on fan by black paint/Marker complete all as specified and directed. 194 Item No 187 : S&F GI perforated Cable trayof size 100 mm casing fittings incl base trench and cover complete with fixingaccessories on surface of wall including laying ofelectrical and comunication/ telephonic cable terminal and write down MES Number on fan by black paint/Marker complete all as specified and directed. 195 Item No 188 : S & F for PVC non-metallic rigid Cable /Lan wire Ducts/Wiring Channels/Cable Tray PVC FRLS Type Standard Slot 45MM X 45MM(Height X Width ) A Type LockLAN wire Duct ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 45MM X 45MM(Height X Width ) for LAN, telephone and includingany damage /cutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed. 196 Item No 189 : Excavation in trenches not exc 1.5 mtr width and not exc 1.5 mtr in depth and getting out in soft / loose soil for laying /taking out ofLT UG cable complete all as specified and directed. 197 Item No 190 : Returning, fillingin including necessary spreading, leveling , wateringand well ramming in layers not exc 25 cm thick in soils. 198 Item No 191 : Removal of surplus soil to a distance not exc 50 mtr away and depositing where directed as a level not exc 1.5 mtr above the starting point. 199 Item No 192 : Supply and laying well burnt Bricks , locally available best quality (sub class B bricks) laid in trenches perpandicular to U/G cable for cable protection complete all as specified. 200 Item No 193 : Supply , spreadand filling approved sand in cable trenches for cushioning of LT UG cable all as specified.NOTE :- Punned thickness only will be measured and paid. 201 Item No 194 : Supply and LayingLT UG cable of size 3.5core x 35 sq mm laid in trenches /floors/on wall /service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal /cable gland as per site requirement including necessary connecting to the main switches /cut outs MCB/MCCBwith necessary lugs after cutting to required length of cable complete all as specified and directed . 202 Item No 195 : Supply & lay GI tubinglight grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc of size 40 mm dia bore complete all as specified anddirected . 203 Item No 196 : Supply, installation, testing and commissioning out door typeLT panel board ,made out of 3.15mm thick CRCA sheet , factory made, CPRI Approved, cubical type,with slantingtop at leaset 10 Cm projection all around, fedder pillar type,fabricatedwith 50x50x6mm angle iron frame workwith independent door for each feeder,busbar chamber cable tray on both side fully compartmentlized design, double door type & commen openable hinged door from rear side, floor mounting type, busbars made of aluminiumduly insulated with heat retardent fire proof (HRFR) heat shrinkable sleeves of relevant colours.Bus bar shell be properly supported/mounted on epoxy insulators.All live parts and joints shall be insulated with (HRFR) shrouds, conforming to IS, including provn for connecting suitableearth strips,painting with one coat of anti corrosive coating and finally epoxy polyester powder coating of flint Grey shade (RAL-7032),Confirming to IP 54 protection and confirming relavent IS, comprising the adequate arrangement to supply & fix the following accessories,including connecting cable glands and cable lugs,fixing of earth lead to earth terminal of panel including necessary excavation & PCC foundation complete all as specified & Directed.( Note:- Cost of all accessories are deemed to be included in the rate quoted). 204 Incoming (a) Aluminium bus bar - 400 Amps rating - 04 Nos. for phases and neutral 205 (b) MCCB 4 pole 250 Amps, 415 volt, 36 KA - 01 No ( incoming) 206 (c)3 phase Voltmeter (0-500V) digital type with selector switch-01 No 207 (d)3 phase Ammeter (0-400 Amps) digital type with CTs of suitable ratio and selector switch - 01 No. 208 (e) ON/OFFLED type indication lamp with toggle switch - Set of 03 209 Out going:-(a)MCCB 3 pole 100 Amp, 415 volt, 25 KA - 03 Nos 210 (b) MCB SPN 32Amp, - 04 Nos 211 Item No 197 : M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type ofsoil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. 212 SCHEDULE A(Schedule of credit )Schedule of Credit Rs 284047.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net amount)

Contact Information