|
Tender For Interiors Work For Kopalle Branch In Bhimavaram (A.P.) Facade of Entrance Door- Refer Dwg Sft. 120 Providing and fixing in position Aluminium composite panel Boxing with PVDF coating & LDPE core laminated Eurobond / Altobond/ Alukbond Exterior Grade 4 mm thick with composite of (0.5mm-3mm-0.5mm) including fabrication for the same with aluminium sections, required hardware, silicon sealent (Dow Corning 789) masking tape, necessary scaffolding etc. as detailed in drawing complete in all respects. A) Front Entrance 2 False Ceiling (Gypsum Board) Sft 300 FALSE CEILING (As per Desigen) :Provided & fixing with Indian gypsum or equivalent suspended false ceiling (in any shape as shown in drawing) which includes providing and fixing G.I perimeter channels of 0.55mm thk having one flange of 20mm & another flange of 30mm & a web of 27mm along the perimeter of the ceiling, screw fixed to the brick wall with the help of nylon sleeves & screws, at 610 mm centers. as per manafacturers spec.s, taping of joints and finishing. finally the board are to be jointed and finished so as have a flush lock which includes filling & finishing tapered square edges of the boards with jointing compound, paper tape and & two coats of primer suitable for gypboard & 2 coats of emulsion paint with putty after appropriate surface preparation, of approved shade and colour by the bank / consultent. complete as shown in drawing. (Note:- Only the plan area will be measured for payment. No extra payment will be made for cutouts, grooves, mouldings etc. ) FALSE CEILING (GRID) : The grid false ceiling shall be provided in the Banking Hall, Manager’s etc. Refer drwgs. No. 1-4-8. the ceiling height and level shall be provided at the perimeter. The minimum height of the ceiling cavity should be 100mm. All service fittings integrated within the suspended ceiling must be independently supported from the ceiling grid by a structure designed for the purpose. Ceiling tiles: shall be armstrong fine figured classic lite RH99 of 16mm thickness. Suspension system: shall be of armstrong trulok silhouette reveal profile grid system with 15mm flanges incorporating 3mm central recess in global white with black reveal. silhouette main runners and cross tees to have mitred ends and "birdsmouth" notches to provide mitred cruciform junctions. sft 1000 3 Painting for Banking hall Providing & applying White Plastic Emulsion paint of Asian Paints/ ICI Dulux/ Berger and Sporty Yellow-X104 shade of Royal Luxury Emulsion of Asian Paints in minimum 2 coats including scrapping, opening of existing cracks, filling up of “V” cracks with epoxy expandable putty to required depths, making good weak plastered/ unplastered surfaces with cement plaster wherever required. Item to include Plaster of Paris, primer, palti & making good existing surface to receive new paint including cleaning on completion of painting work etc. complete in all respects.inc., cost of two coats of Birla wall care wall putty) Color Scheme for interior works and modular Furniture Laminate scheme of SUNMICA/ FORMICA/ASSOCIATE Main Shade - ICE BEECH Blue shade No. 1568 Red Shade No. 1566 Color Scheme For Internal Wall Painting: Type of Paint - Acrylic Emulsion paint Shade of the Paint – DAY BREAK Brand of the Paint – Available in Asian Paints 24 4 Entrance Door Sft 70 Providing and fixing Entrance Door (glazed) as per drawing no.11 in Silver Anodised aluminium door section (Jindal make) in top and bottom, glazed with 12 mm thick glass of approved make with etching and frosting. Item to include floor springs, lock, all necessary hardware of Stainless Steel finish as approved by the Project Consultant/ Bank complete in all respects. 5 Cash Counter & officer counters(inc..,curred portion) Rft 27 Providing and fixing in position Cash Counter 2’-9” wide as per drawing No.(2-A, 2-B, 2-C, 2-D, 2-E, 2-F) comprising of the following : i)Working top made with 25mm thick plywood finished with 1mm thick laminate. Outside edge of the working top shall be provided 1¼”X1” Teak Wood moulding finished with melamine polish. Inside edge will be provided with ½ “x1” T.W. beading patti with melamine polish. ii)Vertical facia (Apron) made with 18mm thick plywood finished with 1mm thick laminate with 1mm thick groove at the joint of laminates of two different shades. iii)Vertical drop (horizontal band) shall be provided on the facia below the working top made with 18mm thick plywood finished with 1mm thick laminate with provision for concealed light, 1 mm thick groove shall be provided at the joint of two different shades of laminate. iv)Glazed partition of 1’-4” height above working top provided with 12mm thick toughened and frosted glass besides non-transparent film from inside fixed to partition as per fixing details and to boxing with concealed S. S. finished ‘D’ brackets as shown in the drawing. The exposed edges of the glass shall be finished in mirror polish. v)Transaction top shall be provided with 12mm thick toughened glass (partly glazed partly frosted) fixed horizontally with concealed Stainless Steel D bracket. Both exposed edges (inside and outside) shall be moulded and finished in mirror polish. vi)Glazed partition having height 1’.0” above the transaction top (in facia) shall be provided with 12 mm thick glass (clear) with cut out of 8”x 4” as per drawing. The edges of cut out and the top edge of glass are to be mirror polished and to be fixed to partition as per fixing details and to boxing with concealed S. S. finished ‘D’ brackets as shown in the drawing. vii)Glazed partition provided with 12mm thick glass (Clear) above the slit to be fixed to partition as per fixing details and to boxing with concealed S. S. finished ‘D’ brackets as shown in the drawing. . The exposed edges shall be finished in mirror polish. viii) 7’-7” high Boxing (10”x 10”) made with 18mm thick plywood as per drawing with 1-6” horizontal extension at the top including providing and fixing 6 mm thick square frosted glass at a height of 5”-11” above Finished Floor level. ix) 1’-9” high boxing (5”x 5”) made with 12 mm thick plywood finished with 1 mm thick laminate are to be provided. x)Telescopic CPU Stand/ ready made Keyboard tray shall be provided of approved model and make. xi) Footrest made with T.W. member of size 4”X1 ½ “ finished with french polish. xii) Drawer units as per drawing shall be provided and each drawer should have vertical partitions for keeping the currency notes and multipurpose Godrej locks. Facia of drawer unit shall be finished with 1mm thick laminate and all other sides shall be finished with white enamel paint. The drawers will be provided with handles (Stainless Steel finish) and channels as per approval of the Project Consultant / Bank. xi) Boxing as per drawing made with 12mm thick plywood finished with Synthetic enamel paint shall be provided below the table top for electrical conduiting and at the bottom for the LAN cabling/Telephone wire conduiting. The item to include all necessary hardware and fittings in Stainless Steel finish, lipping to all edges and making provision only for electrical fitting behind the Vertical drop and also in the 10”x10” boxing as shown in the drawing. Necessary beadings with matching melamine polish for fixing the glass are to be provided as per drawing/ as directed. 25 6 Solid Full Height Partition in strong room Sft 105 Providing & fixing in position solid Full Height Partition in frame work including door in 2’x 2’ grid (horizontally and vertically) comprising of 2”x 1½” T.W. Section with 6 mm thick plywood on both sides finished with 1 mm thick laminates of approved make and colour as shown in drawing no.17. Item to include 2” x 2” T.W. member for door frame. All exposed T.W. surfaces to be finished in melamine polish of matching laminate colour as directed including all necessary Stainless Steel finish fittings/ hardware, door closers, Godrej locks and wood preservative paint etc. as per list of approved material and as approved by the Project Consultant/ Bank complete in all respects. (no extra cost willbe given for door) (Note: In case of false ceiling, the vertical T.W. members to be fixed with pucca ceiling but the area of partition payable will be below the false ceiling only). 7 Partly Glazed Full Height Partition for Manager Room and UPS Sft 400 Providing and fixing in position partly glazed Full Height Partition work as shown in the drawing nos. (3) & (4) including door as shown in the drawing No.(13) in frame work at 2’ x 2 ‘ grid (horizontally and vertically) comprising of 2” x 1½” T.W. Section and / or as per frame work shown in the drawings with 6mm plywood on both sides finished with 1 mm thick laminates of approved shade and colour as shown in drawings.(no extra cost will be given for door) Item to include 8 mm thick glass with etching and frosting as per design and 2”x 2” T.W. member for door sides and glass sides and T.W. door frame to take 8 mm thick glass with etching and frosting. All exposed T.W. surfaces to be finished in melamine polish of matching laminate colour as directed including all necessary Stainless Steel finish fittings/ hardware, door closers, Godrej locks and wood preservative paint etc. as per list of approved material and as approved by the Project Consultant/ Bank complete in all respects. (Note: In case of false ceiling, the vertical T.W. members to be fixed with pucca ceiling but the area of partition payable will be below the false ceiling only). 8 Partly Glazed Partition for Cash Cabins Sft 170 Providing and fixing in position 7’-7” high partly glazed partition for Cash Cabins as per drawing nos. (2-A, 2-B, 2-C, 2-D & 2-E) including door drawing no.(12) in frame work at 2’ x 2 ‘ grid (horizontally and vertically) comprising of 2” x 1½” T.W. Section and / or as per frame work shown in the drawings with 6mm plywood on both sides finished with 1 mm thick laminates of approved shade and colour as shown in drawings. Item to include 8 mm thick glass with etching and frosting as per design and 2”x 2” T.W. member for door sides and glass sides and T.W. door frame to take 8 mm thick glass with etching and frosting. The door will be provided with T.W. louvers finished in melamine polish of matching laminate colour. The doors are also to be provided with Godrej Night Latch. Two wooden trays are also to be provided as per drawing. Necessary cutouts are to provided in the glass and the edges of the glass cutouts are to be finished in mirror polish. All exposed T.W. surfaces to be finished in melamine polish of matching laminate colour as directed including all necessary Stainless Steel finish fittings/ hardware, door closers, Godrej locks and wood preservative paint etc. as per list of approved material and as approved by the Project Consultant/ Bank complete in all respects. 9 Partly glazed Low height partition inc., Wicket Gate Providing and fixing in position partlyglazed low height partion (2 1/2" thick) in frame work with T.W. vertical members t 2' c/c and c horizonal members at equal distance comprising of 2'x1 1/2 " T.W. Section with 6mm ply wood on both sides finished with 1mm thick laminates of approved make and shade as shown in drawing no. 14 or 3. Item to include 12mm thick glass(Class/frosted) to be fixe as shown in drawing. The exposed edges of the glass to be finished in mirror polish. T.W.runer should be melamine polished in matching colour of laminate etc complete in all respects. sft 30 10 Manager’s Table with side table Each 1 11 Officer Table with Side table Each 2 Providing and fixing in position Staff Table of size 4' 3"x 2' 0" as per drawing No.(5) by using 25mm thick plywood for top and 18 mm thick plywood for all other horizontal and vertical members. Telescopic CPU Stand/ ready made Keyboard tray shall be provided. Drawer units as per drawing shall be provided with multipurpose Godrej locks in each drawer. Facia of drawer unit shall be finished with 1mm thick laminate and all other sides shall be finished with white enamel paint. The drawers will be provided with handles (Stainless Steel finish) and channels as per approval of the Project Consultant / Bank. All exposed plywood surfaces to be finished with 1mm thk. laminate of approved make & shade, and all exposed edges of table top & ply verticals to have 1" x 1/4" T.W.lipping. All exposed T.W. sections to be melamined and internal surfaces to have white enamel paint as directed. The item to include plywood boxing, all necessary hardware and fittings in Stainless Steel finish, lipping to all edges etc. complete in all respects. 12 Low Height Storage/ Back Storage(Credenza) SFT 65 13 Writing Ledge with Cheque Drop Box (12mm Glass Top): Made out of 18mm ply as per design and exposed external surfaces to be laminated and internal surface to be painted with top provided 12mm thk Etched Glass with machine polished edges. The entire work has to be done to the satisfaction of the Architect. The design given has to be strictly followed. SFT 1 14 Notice Board: Providing & fixing of Soft Board on the customer lobby made of jolly board with a fabric of B/R 175/- per metre. The design and the entire work has to be done as per instructions of the Architect at the time of execution. SFT 20 15 voucher trays No's 1 16 Aluminium Grill above cash
|
