|
tender for repair and maintenance of d-type no-28 at urjanagar colony under rajmahal area.---1 item description/ heading 2 providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). 3 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars. 4 providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and screws etc. complete :250x16 mm 5 providing and fixing isi marked oxidised m.s. tower bolt black finish, (barrel type) with necessary screws etc. complete :200x10 mm 6 providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete :125 mm 7 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 8 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.110 mm diameter 9 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. coupler:110 mm 10 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. bend 87.5°:110 mm bend 11 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) 12 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) 13 applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : water thinnable cement primer 14 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 15 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : old work (one or more coats) 16 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 17 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old work 18 finishing walls with water proofing cement paint of required shade : old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of priming coat. 19 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 20 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :white vitreous china flat back wash basin size 550x400 mm with single 15 mm c.p. brass pillar tap 21 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete. 10 litre capacity - white 22 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete.flexible pipe: 32 mm dia 23 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. 24 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 25 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore 26 providing and fixing c.p. brass shower rose with 15 or 20 mm inlet :150 mm diameter 27 providing and fixing brass bib cock of approved quality : 15 mm nominal bore 28 providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931.15 mm nominal bore 29 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 a) 15 mm nominal bore:15mm nominal bore 30 providing and fixing ptmt soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
|
