Bids Are Invited For Price Registration For Future And Possible Acquisition Of Various Furniture To Service ... in Brazil

Work Detail

Lot 1 - Individual Adult Student Set: Set Consisting Of Table And Chair. Chair: The Structure Must Be Made From Round Tubes With 0 19.05 Mm And 1.5 Mm Wall Thickness Bent And Welded. It Must Receive Metallic Surface Preparation Protection Using Nanotechnology And Have An Electrostatic Epoxy Powder Coating. At The Ends Of The Foot Tubes, The Structure Must Feature Engineering Thermoplastic Plastic Tips. The Seat Must Be Made Of Injected Copolymer Polypropylene And Anatomically Molded With A Textured Finish Of 4 Mm Wall Thickness With Rounded Corners, Mounted To The Structure By Means Of Fitting On The Front Of The Chair And Be Fixed On Its Back By Two Self-Tapping Screws For Plastic Of Dimensions 5 X 25 Mm. The Front Part Must Have A Rounded Edge With A Radius To Avoid Obstructing Blood Circulation. Measurements: 395 Mm Wide, 420 Mm Deep With A Height From The Seat To The Floor Of 456 Mm. The Backrest Must Be One-Piece, Without Openings, Be Made From Injected Polypropylene Copolymer And Be Anatomically Shaped With A Textured Finish, With An Average Wall Thickness Of 3.5 Mm. It Has Rounded Corners And Is Joined To The Structure Through Fittings In Its Posterior Cavities To The Tubes Of The Metal Structure Of The Chair And Is Locked By Two Retractable Pins Injected In Polypropylene Copolymer, In The Same Color As The Back, Without The Presence Of Rivets Or Screws. Its Dimensions Are 394 Mm Wide By 195 Mm High. Table: Top Injected In Abs, With Pigmentation, Smooth Surface Without Shine And With Rectangular Shape. It Must Be Fixed To The Countertop Using A Fitting On Its Entire Side And Four Towers For Fixing With Screws. The Counter Top Must Support, Reinforce And Structure The Surface Of The Top In Addition To Providing A Finish On The Lower Part Of The Table Top. The Dimensions Of The Top Are 615 Mm Wide And 485 Mm Deep, 760 Mm High And Have A Wall Thickness Of M, Lot 1 - Individual Youth Student Set: Set Consisting Of Table And Chair. Chair: The Structure Must Be Manufactured From Round Tubes With 0 19, The Structure Must Feature Plastic Polypropylene Tips. The Seat Must Be Made Of Injected Polypropylene Copolymer And Anatomically Molded With A Textured Finish Of 4 Mm Wall Thickness With Rounded Corners, 330 Mm In Depth With A Height From The Seat To The Floor Of 380 Mm. The Backrest Must Be Solid, Without The Presence Of Rivets Or Screws. Its Dimensions Are 394 Mm Wide By 190 Mm High. Table: Top Injected In Abs, Reinforcing And Structuring The Surface Of The Top In Addition To Providing A Finish On The Lower Part Of The Table Top. The Dimensions Of The Top Are 615 Mm Wide And 480 Mm Deep, 650 Mm High And Have An Average Wall Thickness Of 4 Mm, Lot 1 - Individual Childrens Student Set: Set Consisting Of Table And Chair. Chair: The Structure Must Be Manufactured From Round Tubes 0 19. 305 Mm Deep With A Height From The Seat To The Floor Of 355 Mm. The Backrest Must Be Solid, Without The Presence Of Rivets Or Screws. Its Dimensions Are 375 Mm Wide By 195 Mm High. Table: Top Injected In Abs, Reinforcing And Structuring The Surface Of The Top In Addition To Providing A Finish On The Lower Part Of The Table Top. The Dimensions Of The Top Are 620 Mm Wide And 485 Mm Deep, 583 Mm High And Have An Average Wall Thickness Of 4 M, Lot 1 - Set

Contact Information