|
Dining Room Set With Table And Chairs. Dining Table 8 Seats With Attached Adult Bench Dining Table 08 Seats With Bench. Mkesa Consisting Of A Top Top Made With Medium Density Wood Particleboard (Mdp – Medium Density Particleboard), 18Mm Thick, Covered On Both Sides With Melamine Laminate, By The Effect Of Hot Pressing Which Causes The Laminate To Fuse With The Particleboard Wood, Forming A Single And Inseparable Body With It (Bp), Coming From Certified Reforestation Wood With Fsc Seal, With 2Mm Ps Tape Around The Entire Contour, Glued To The Top Through The “Hot Melt” Process, Finished In A Color Similar To The Top Covering, (Solid And Woody Colors), With Impact Resistance And Thermally Stable. Bench Made With Medium Density Wood Particleboard (Mdp – Medium Density Particleboard), By The Effect Of Hot Pressing That Makes The Laminate Fuse With The Agglomerated Wood, Originating From Wood Certified For Reforestation With Fsc Seal, With T Profile Without Flaps Around The Entire Contour, Glued To The Seat Through A “Hot Melt” Process, Finish In Similar Color To The Top Covering, With Impact Resistance And Thermally Stable, Fixed To The Structure Using M6x12 Screws And Metal Plugs. Structures In 3” Inch Round Tube With 1.5Mm Wall And Foot Connection Cross Member Made Using 50X30 Tube With 1.06Mm Wall. Cross Member Union Plate Made From 2Mm Carbon Steel. Union System Between The Pieces Using Mig Mag Welding. Columns With Shoe Injected Into High Density Polye-Tylene For Protection, Without Possibility Of Leveling. Side Leg Connection Crossbars Made Of 25X25 Tube With 0.90Mm Wall, With 25X25mm Union Tube, Joined To Each Other Using Mig Mag Welding. Structure Assembly Made With M6x35mm Screws., Childrens Dining Room Set With Table And Chairs. Childrens Dining Table: Composed Of 01 Table, 08 Chairs With The Following Specification: Rectangular Childrens School Set, Composed Of 01 Individual Table. Thickness 2.2, Subjected To The Anti-Rust Process Through Submersion In A Set Of Chemical Baths Based On Zinc Phosphate, Electrostatic Epoxy Powder Painting, Cured And Polymerized In An Oven At 210T In The Same Color As The Top, Shoes Made Of Injected Polypropylene Copolymer Of The Same Color And Tone As The Top And Base Set. The Table Must Have Adjustments Of At Least 6 Sizes, Being 480Mm, 520Mm And 560Mm. The Chair Has A Shell Made Of Injected Polypropylene, With A Hole For Ventilation. It Must Have A Slight Anatomical Curvature That Allows The Child To Better Position Themselves When Sitting. 380Mm. Structure Will Receive Anti-Corrosion And Anti-Rust Treatment Through Submersion In A Set Of Chemical Baths Based On Zinc Phosphate, Electrostatic Epdxi Powder Painting In The Color Of The Chair, Textured, Cured And Polymerized In An Oven At 210*C. Color And Tone Identical To The Seat Back Assembly, Fixed To The Structure Using Self-Tapping Screws.
|
