Bids Are Invited For Registration Of Prices For Future And Eventual Acquisition Of School Furniture For Scho ... in Brazil

Work Detail

University School Chair Minimum Specifications: With Side Clipboard Attached To The Reinforced Metal Structure With Seat, Back, Feet, Book Holder And Clipboard In High-Impact Thermoplastic Resin. The Seat Must Be Manufactured In Virgin High-Impact Thermoplastic Resin, Blue In Color, Anatomically Shaped With A Polished Finish On Its Edges And Textured On Its Inner Side, With Dimensions Of 500 Mm Wide, 440 Mm Deep, Anatomically Shaped In Order To Provide Comfort To The User, Allowing Tolerance Of Up To +/- 7% For Width And Depth. On Its Posterior Face It Will Be Equipped With A Slight Recess That Has The Function Of Preventing The Retention Of Blood Circulation, While Its Lateral Faces Are Elevated, Forming A Kind Of Shell. It Has Sets Of Holes Or Openings Forming Air Inlets Positioned On Its Upper Face, Facilitating Ventilation Of The Seat During Use. The Height Of The Seat From The Ground Is 450 Mm, And It Must Have A Slight Inclination That Provides The User With A More Comfortable Position When Sitting. The Backrest Must Be Manufactured From Virgin High-Impact Blue Thermoplastic Resin, With Dimensions Of 490 Mm Wide By 350 Mm High, With A Wall Thickness Of 4 Mm And Rounded Corners, With Sets Of Holes Forming Air Inlets Positioned On Its Upper Face, Facilitating Ventilation Of The Backrest During Use, Allowing Tolerance Of Up To +/- 7% For Width And Height. The Backrest Must Have A Hand Grip Cavity To Facilitate Movement Of The Chair. Joining To The Structure Through Its Lower Cavities That Fit Into The Metal Structure, Locked By Locking Pins Injected Into Polypropylene Copolymer In The Same Color As The Backrest, Eliminating The Need For Rivets Or Screws. Side Drawing Board Must Be Manufactured In Thermoplastic Resin, Hexagonal Trapezoid Set - Composed Of 06 Tables, 06 Chairs And 01 Central Table. Enabling Various Pedagogical Trainings In The Classroom. Wallet With Top In Injected Thermoplastic Resin With The Following Dimensions: 175Mmx372mmx588mm With Variation Of +/- 5%, With Flaps Around The Entire Perimeter, Equipped With A Pen Holder Integrated In Its Centralized Top, Checkered Front Grid Made Of Injected Copolymer Polypropylene. Structure Made From Carbon Steel Tube With Rectangular Section 40X20x1.2Mm With Seam, 30X20x1.20Mm And 20X20x1.20Mm. Anticorrosive And Antirust Treatment Through Submersion In A Set Of Chemical Baths Based On Zinc Phosphate, Electrostatic Epoxy Powder Painting In Textured Gray, Cured And Polymerized In An Oven At 210°C. Shoes Made Of Injected Polypropylene Copolymer With A Color And Tone Identical To The Top / Subtop And Front Grille Set, Fixed To The Structure Using Self-Drilling Screws. Chair Features A Seat And Back Made Of Injected Polypropylene Made With The Following Dimensions: Seat Measuring 348Mm Chair Structure Made From Industrial Steel Tube Of Rectangular Section 30X20mm With Seam And 20X20x1.20Mm. Structure Will Receive Anti-Corrosion And Anti-Rust Treatment Through Submersion In A Set Of Chemical Baths Based On Zinc Phosphate,

Contact Information