|
Tender For Various Work Of Exercise School Work -Kondhwa B. S.No.2/1/1 Part Loknete Gopinath Munde Vyayam Shala To Do Various Works.-ITEM NO: 1 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, Including removing the excavated material upto a distance of 50 metres beyond the bullding area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Manual Means (SSR Item No: 21.03) (PMC Bhavan) Unique No (15203) Rate List Year (2024-2025) ITEM NO: 2 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite /gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design and drawings or as directed including steel centering. plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) With fine aggregate (Crushed sand VSI Grade) (SSR Item No: 26.30) (PMC Bhavan) Unique No (15349) Rate List Year (2024-2025) ITEM NO: 3 Transportation of material obtained from excavation including soil, Cu.M rubble, bricks, RCC concrete, kerb stones, steel railing, iron pipes, channels etc. Obtained from excavation, dismantling, loading in a Truck of minimum 5 Cu M capacity or designed capacity and transporting within the municipal limits or any designated place, unloading, stacking or spreading of material etc. complete. As directed by Engineer In charge (SSR Item No: 78.36) (PMC Bhavan) Unique No (17223) Rate List Year (2024-2025) ITEM NO: 4 Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (SSR Item No: 26.33) (PMC Bhavan) Unique No (15352) Rate List Year (2024-2025) ITEM NO: 5 Lowering down the debris obtained from breaking and removing the cement plaster/burnt brick masonry of the first floor by any means without causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site complete. (SSR Item No: 46.59) (PMC Bhavan) Unique No (16064) Rate List Year (2024-2025) ITEM NO: 6 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (SSR item No: 27.13) (PMC Bhavan) Unique No (15381) Rate List Year (2024-2025) ITEM NO: 7 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid for rendering uneven and honeycombed surface only. Newly lald concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc, complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No: 24.08) (PMC Bhavan) Unique No (15311) Rate List Year (2024-2025) ITEM NO: 8 Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases (NOx VOC's, CO, SOX, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide, and Absorbs CO2 (4.8 Kilogram/151), plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist (SSR Item No: 63.16) (PMC Bhavan) Unique No (16705) Rate List Year (2024-2025) ITEM NO: 9 Water bound distemper: Providing and applying water bound distemper along with primer coats including scaffolding if necessary, cleaning and preparing the surface etc. complete Recommended companies: Asian, neroleck, Dulex (SSR Item No: 63.1) (PMC Bhavan) Unique No (16691) Rate List Year (2024-2025) ITEM NO: 10 Oil paint glass finish: Providing and applying two coats of oil paint glass finish bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete (SSR Item No: 63.2) (PMC Bhavan) Unique No (16692) Rate List Year (2024-2025) ITEM NO: 11 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (SSR Item No: 32.04) (PMC Bhavan) Unique No (15439) Rate List Year (2024-2025) ITEM NO: 12 Providing and laying telephone black / Amba White / Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. (SSR Item No: 33.68) (PMC Bhavan) Unique No (15533) Rate List Year (2024-2025) ITEM NO: 13 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (SSR Ilem No: 23.01) (PMC Bhavan) Unique No (15297) Rate List Year (2024-2025) ITEM NO: 14 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (SSR Item No: 39.9) (PMC Bhavan) Unique No (15683) Rate List Year (2024-2025) ITEM NO: 15 Providing and fixing 12 mm thick waterproof plywood (durian ucotech greenply, mars (marsgold 100% garjan), euro, orchid, century with phenol bonded etc (ISI)) (SSR Item No: 62.11) (PMC Bhavan) Unique No (16542) Rate List Year (2024-2025) ITEM NO: 16 Providing and fixing 19 mm thick waterproof plywood (durian ucotech greenply, mars (marsgold 100% garjan), euro, orchid, century with phenol bonded etc (ISI)) (SSR Item No: 62.12) (PMC Bhavan) Unique No (16543) Rate List Year (2024-2025) ITEM NO: 17 Laminates sheets 1 mm thick: Providing and fixing laminates sheets as per company specification and fix it with fevicol - Recommended companies-formica, Royal touch, Marino, Green lam, Euro. (1 mm thick laminates sheets) (SSR Item No: 62.23) (PMC Bhavan) Unique No (16566) Rate List Year (2024-2025) ITEM NO: 18 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt. total on each side) profiled sheets for roofing. The feed material Is manufactured out of nominal 0.45mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min.550 MPa yield strength, metallic hot silicon)coat (with inorganic pigment). The paint shall have a total coating dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250mm center to-center. The end rib shall be designed for anti-capillary groove, and return leg. The feed material should have coll manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, solf-drilling sorow etc, complete. (weight of profile 4.52 Kilogram/Square Metre) with COLORBOND (R) steel quality super durable polyester paint (SSR Item No: 38.34) (PMC Bhavan) Inique No (15655) Rate List Year (2024-2025)+ ITEM NO: 19 Providing & Applying Chemical Waterproofing On Pcc For Ugwt/Swim smoothly and cured for 2 days...... 1b) High Density Polyethylene sheet 150 Pool 1) Floor Treatment Before Casting: 1a) The PCC shall be finished microns shall be loosely laid over the PCC surface and overlapping with sell adhesive double 1c) side tape of minimum 4 to 6 inches 1d) The reinforcement for the raft shall be tied over the High Density Polyethylene CRYSTALLINECERTE/EQUIVALENT MAKE shall be spread over the sheet laid fe) Crystalline waterproofing sysytem CERA area in qty of 1.5 kg/m2 in dry state..... 1f) Raft slab, padadi and other features to be casted after the above treatment. 2) Surface Preparation :-2a)After Deshuttering Complete Cleaning of Roc Padadi. Raft. Gutter, Core Area by Jet Machine / Blower & wire Brush....2b) "V" Grooves ( Haunching) shall be cut on slab & along the floor & wall joints (13mm x 13mm) 3) Crack Filling:- 3a) "V"Grooves will be filled with Polymer Modified Mortar along the Periphery wall joints (13mm x 13mm) Inner....3b)"V"Grooves of the Slab will be filled with non-shrink grout Paste (CERAGROUT 40/EQUIVALENT MAKE WATER-160ml Per Bag....c) Dry it for 12 Hrs. before Ponding 4) Filling of Water for 1st time 48 hrs 5) Checking:-5a) Checking at for leakages from all Sides & Bottom, If minor Leakage then remove the water and clean the Sunk portion and continue the process of Waterproofing....5b) if majour Leakage found then. Repeat the process from Sr. no. 1,2 and 3....5c) Socketing/Grouting with presure by using cement slurry admixed with expanding grouting additive CERA EXPAN 250/ EQUIVALENT MAKE (225 gms. Per bag of cement)......5d) G. I Nipples shall be removed after two days and the holes will be finished with Polymer Modified Mortar.....5e) Filling of Water for 48 hrs....5f) Checking at for leakages from all Sides & Bottom....5g) Leave 24 hrs. to get Dry 6) Crystalline Coat:- 6a) Cera Crystallinecrete / Equivalent Make shall be mixed in the ratio of 3 Parts powder 1.5 to 2 parts of water and shall be applied in two coats.....6b) Dosage of 1 kg/m2 (for 2 coats) over the concrete Padadi, Gutter and Raft Surface from Inner Side Only......6c) In between 1 st and 2 coat application there should be a time gap of 6 hrs. 7) Plastering:- 7a) The Treated Wall Area shall be Plaster (1: 4) admixed with CERA PROOF IWP (L) /EQUIVALENT MAKE @dosage of 200ml per bag of cement - thickness 12-15 mm 8) Base Coat:- Prepare Base Coat Mortar (Screed) (1:3: 5Cement: Crush Sand:10mm Metal + CERAPROOF IWP /EQUIVALENT MAKE-200 ml per Bag of Cement ), Thickness of Basecoat should be -Min. 20mm & Max. 40mm...... 8a) Base Coat to be done on the Floor with above Mortar with slope (20 mm) on SUMP, Finish of top of Base Coat with Slope 25MM Per 3.0m Length, Pack the cores for ponding. 9) Ponding:-9a) After Gap of 12 hrs Check whetherit has became dry, If dried....9b) Fill with Water (Full tank) for 2nd time-3 days......9c) Checking at for leakages from all Sides & Bottom 10) Drying Period:-Leave 24 hrs. to get Dry 11) Chemical Coat:- Check whether the surface is dry & then Water Based Coating CERA COTE EPW/Equivalent Make shall be applied in 2 coats on all the concrete surface from inner side only. (SSR Item No: 70.01) (PMC Bhavan) Unique No (17082) Rate List Year (2024-2025) ITEM NO: 20 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (SSR Item No: 35.21) (PMC Bhavan)
|
