|
Tender For Provision Of Elevated Sentry Posts At Afs Thanjavur; 1 Excavation in post holes on existing hard standing and PQC of any description and any thicknes including(or Similar holes) each post holes not exc 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface in hard /dense soil complete all as specified and as directed. 2 M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concreting complete all as specified and as directed. 3 S&F rolled Galvanised Iron angle asin Posts, roof trusses (framed), trussed, purlins, crane gantries, ladders, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats confirming to Fe-410W(Gde E-250) quality Acomplete all as specified and as directed. 4 S&F bands, straps, supports or stays for rainwater, plain angle cleat for securing purlin, knee piece inserts, two way and three way straps, plate washer and similar small articles, confirming to Fe-290 Gde E-165 complete all as specified and as directed. 5 S&F plates (plain or chequered) Channels, square, cut or notched (ordinary and counter sunk) forming holes without any attachment of Fe-410-W (Grade E-250) quality B complete all as specified and as directed. 6 S&F mild steel works such as wind ties for roof including securing with bolts etc and similar work using rolled section confirming to Fe-290 Gde E-165 complete all as specified and as directed. 7 S&F pre-painted high tensile strength corrugated galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturers instructions through specialist agency complete all as specified and as directed. 8 S&F pre-painted high tensile strength galvalume plain sheet as in ridge, eve board, weather board and in strraight flashing etc with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturers instructions through specialist agency and as per profile and shade as approved by GE. 9 M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed 10 S&F 1 mm thick Plain, black, mild steel sheeting, as in wall cladding over framed grid for sentry posts etc and other similar articles like ridges hips, valley gutters,drip and straight flashings complete all as specified and as directed 11 M&L Preperation of new steel surfaces of camouflage pattern of any description over 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed 12 M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening Fe 410 -W (Gde-E- 250) quality- A complete all as specified and as directed 13 Supply installation testing and commissioning of flood light weather proof and vermin proof LED light with 400 wattincluding fixtures complete all as specified and as directed 14 Supply, laying and testing service connection cableXLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core including with end termination sleeves with suitable lugs, thimble, nut-bolts etc complete connection from existing near by street light to Prop Building security light complete all as specified and as directed 15 Supply, laying and testing service connection cable (for DB)of cableXLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core including with end termination sleeves with suitable lugs, thimble, nut-bolts etc complete connection from existing Panel / DB to Prop DB complete all as specified and as directed 16 Excavation in trenches n.exc 1.5 mtr wide and n exc in depth for taking out cable / pipe line n.exc 10 sq mtr on plan and n.exc 1.5 mtr depth and getting out in soft/loose soil comlete all as specified and as directed. 17 Returning and filling in two parts (i) using riddled soil obtain from excavated soil upto depth of 30 cm (8 cm below cable and remaining above cable) for cushioning of cable and (ii) refilling the trench of remaining depth with normal excavated soil complete all as specified and directed. Note:- Excavated soil shall be riddled by using sieve to separate composite particles etc as per IS 1255 1983 and refilling in trenches as in cable cushioning. 18 Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m complete all as specified and as directed. 19 M&L point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100volts grade conforming to IS-694 with multistranded copper conductor flame retardant low smoke (FRLS)in includingPVC rigid non metallic 25 mm PVC casing caping (double Lock) including PVC polycarbonate/PVC/rectangular block/box of suitable size fixed by means of brass machjne screw and cap washer including size 1.5 sqmm (nominal cross sectional areaPVC insulated unsheathed single core multistranded copper conductr cable as earth continuity conductor connected to main switches/DBs or common earth dolly complete all as specified and as directed 20 Description all as per sr item No 19 mentioned here-in-before but for one ceiling fan /Exhaust fanpoint, controlled by oneway switches 5/6 Amps complete all as specified and as directed 21 Description all as per srl item No 19 here-in-before but for one 3 pin socket outlet point, 5/6 Amps on the independent board complete all as specified and as directed. 22 Description all as per item No 19 here-in-before but for point wiring with 4 Sq mm (nominal cross sectional area) single core stranded copper conductor for one switch socket out let point, 15/16 amps on the independent board complete all as specified and as directed 23 S&F Switch socket combination, 2 and 3 Pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type white/ ivory finish complete all as specified and as directed 24 S&F Switch socket combination, 2 in 1, 6 pin, 5/6 amps and 15/16 amps multipurpose, white/ivory finish, flush non shutter non inter locking type complete all as specified and as directed. 25 S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-43 protection suitable for fixing MCBS/lsolators after complete all as specified and directed. 26 S&F MCB, Single pole & neutral, 6 to 32 amps, 240 volts, ‘C’ curve, 10KAcomplete all as specified and as directed 27 S&F MCB, Single pole, 6 to32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and as directed 28 S&F LED PRIDE ESSENTIAL wall mounted LED light 20 Watt LED, 6500K with decorative ultra slim square profile LED lighting fixture with extruded polycorbonate environmental friendly energy efficient complete all as specified and directed. 29 S&F ceiling fan with 600mm sweep complete all as specified and as directed 30 S&F LED bldg security light/street light 20/30 watt 6500K with best in class design and robust heat sink along with class leading IP,IK and surge protections for long lasting performance complete all as specified and as directed
|
