Tender For Bid For Supply, Installation, Configuration And Integration Of Networking Equipments in India

Work Detail

Tender For Bid For Supply, Installation, Configuration And Integration Of Networking Equipments; 1. 24 Port L3-Lite Web Managed Switch (Make: Cisco, HPE, Juniper, Fortinet) • Minimum 24 x 1G RJ-45 auto-Sensing/negotiating ports. • Either Minimum 2 x 1G BASE SFP uplink ports & Minimum 2 x RJ-45 1G BASE-T uplink ports in combination OR Minimum 4 x 1G BASE SFP uplink ports with 2 x 1G BASE-T RJ-45 SFP Transceivers Modules Supplied with Product from Day one in addition to above fixed 24 ports. • Uplink SFP ports must support Single Mode 1G BASE-LX Transceivers. • Auto-negotiation for speed, duplex mode and flow control. • Auto-MDI/MDIX. • IEEE 802.3X flow control. • Integrated LEDs for improved visual monitoring and analysis. • Must have IEEE 802.1Q Static & Trunk VLAN with min 4090 VLAN IDs & Port-based VLAN configuration. • Spanning Tree Protocol (STP) to support standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP). • SNMPv1, v2c, and v3 Configuration and management. • IEEE 802.3ad Link Aggregation Control Protocol (LACP). • IPv6 ready/supported. • Built-in switch Web-based GUI configuration utility for easy browser-based device configuration (HTTP/HTTPS) which Supports configuration, system dashboard/view, system maintenance features, monitoring, function to upload/download the Switch software/firmware to the switch, function to upload/download Configurations to and from the switch etc. • Switch should be able to access via SSH. (It is required for Bulk Switch management features like bulk configuration back-up & bulk firmware update through EMS/NMS software) OR If Switch is not having SSH feature than OEM is required to provide Bulk Switch Management Software for switches offered along with requisit perpetual licenses for all switches purchased under this contract for bulk Switch Configuration back-up & bulk firmware update feature without an additional cost to SMC. • Local password and restricted IP addresses for secure access to the switch. • Switch should have 802.1x/NAC authentication feature. • Switch must have functionality of 802.1X MAB with Multi-Authentication Host Mode, port security, dynamic VLAN assignment, DHCP snooping. • Layer 3 IPv4 and IPv6 Static (Inter-VLAN) Routing for manual routing configuration. • Provision of Dual flash images to provide independent primary and secondary operating system files for backup while upgrading. (Optional) • Availability of Port statistics through industry-standard RMON • Jumbo frame support for packets. • Broadcast storm control to help eliminate network traffic storms. • Layer 3 feature/service: Address Resolution Protocol (ARP) Switch should be able to determine the MAC address of another IP host in the same subnet and it must support static ARPs, gratuitous ARP or equivalent feature which allows detection of duplicate IP addresses. OR Switch should have Dynamic ARP Inspection or equivalent feature by which switch should eliminate ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet to prevent unauthorized attacks. • Must have Network traffic filtering or network access control using MAC and IP based ACLs. • Inbuilt Feature of Dynamic Host Configuration Protocol (DHCP) Sever which simplifies the management of large IP networks and supports client and server system. (Optional). Warranty: Minimum 5 Years OEM Direct/Back-to-back Comprehensive Warranty with parts, modules, Power Unit, software technical support. Chassis: 1U, rack-mounting kit included Power: Power supply AC 230 V (50/60 Hz) Proposed Make: Proposed Model/Part Code: 2. 6U Wall Mount Network Rack (Legrand-Valrack, APC- Schneider, Rittal, Netrack, APW President, Vertiv make) Rack Size • 6U Wall mount with min. Depth of 500mm • Lock & key with front glass door • Powder coated Steel cabinet Below mentioned Accessories to be Supplied with each rack unit • Min 1 Cooling Fan • Min 1 Cable Manager • Min 1 Equipment placement tray • Min 5 Power Socket/Plug Strip/PDU (With repair/replacement) • Rack must be supplied with minimum 1 (One) no of standard hardware pack/bag (which includes mounting nut-bolts, etc.) per each Rack Unit for mounting at least 6 Nos Network/IT equipment. Warranty: Min. 5 Years comprehensive warranty including parts like FAN, Power Strip/PDU (repair or replacement) Proposed Make: Proposed Model/Part Code: 3. RJ-45 Cat6 UTP 8P8C Connectors/Plug Cat6 UTP Connector/Modular Plug with 8-position, 8-contact (8P8C) from reputed brand. RJ45 Connector/modular plug that supports Cat6 unshielded 4 twisted pairs Clear/Transparent plastic Housing for cable colour identification with gold/Copper/Alloy plated contacts for fast and accurate data transmission Plug should support 23-26AWG stranded wires or solid wires in Cat6, meet wiring scheme T568A/T568B Replacement Replacement of goods (during the contract period if supplied goods having manufacturing defect & breakable and low or inferior quality. 1. 24 Port L3-Lite/Basic-L3 Web Managed Switch 2. 6U Wall Mount Network Rack 3. RJ-45 Cat6 UTP 8P8C Connectors/Plug

Contact Information