|
Bids Are Invited For UPGRADATION OF 06 quarter AT IT COLONY LAXMAN BAGH KANPUR Total Quantity : 2542-Renovation of T-III/07, 39 Type-II/04, 05, 07, 41 at Income Tax Colony, Laxman Bagh, Kanpur.1 REINFORCED CEMENT CONCRETE 1.1 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3(1cement:1.5 coarse sand (zone-III)derived from natural sources :3 graded stone aggregate 20 mm nominal size derived from natural sources). 1.2 Centering and shuttering including strutting, propping etc. and removal of form for 1.2.1 Shelves(Cast in situ) 1.3 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 1.3.1 Thermo-Mechanically Treated bars of grade Fe- 500D or more. 2 CLADDING WORK 2.1 Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 2.1.1 Granite stone slab of colour black, Cherry/Ruby red 2.1.1.1 Area of slab upto 0.50sqm 2.1.1.2 Area of slab over 0.50 sqm 2.2 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Officer-in- Charge. 2.2.1 Granite work 2.3 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 2.4 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Officer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing white cement mixed with pigment of matching shade complete. 3 WOOD AND P.V.C.WORK 3.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)nondecorative type ,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 3.1.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws 26 3.2 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 3.2.1 35mm thick shutters 3.2.1.1 With ISI marked M.S.pressed butt hinges bright finished of required size 3.2.1.1.1 Second class teak wood 24 3.3 Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) 3.3.1 250x16 mm 12 3.4 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 3.4.1 150x10 mm 12 3.5 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 3.5.1 125mm 24 3.6 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 3.6.1 250x10 mm 24 3.6.2 150x10 mm 24 3.7 Providing and fixing bright finished brass handles with screws etc. complete: 3.7.1 125mm 48 3.7.2 100mm 48 3.8 Providing and fixing magnetic catcher of approved quality in cupboard/ ward robe shutters, including fixing with necessary screws etc. complete. 3.8.1 Double strip(horizontal type) 90 3.9 Providing and fixing bright/matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 3.9.1 125mm 48 4 STEELWORK 4.1 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S.Flat15x3mm and nuts & bolts complete. 4.1.1 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides 4.2 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 4.2.1 4.0mm thick glass panes 5 FLOORING 5.1 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching Pigments etc., complete. 5.2 Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 5.2.1 Double charge vitrified tile polished finish of size 5.2.1.1 Size of Tile 600x600 mm 5.3 Providing and laying Vitrified tiles in different sizes (thickness tobe specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). 5.3.1 Size of Tile 600x600mm 6 FINISHING 6.1 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than gram/litre, of approved manufacturer and required shade and colour all complete to achieve even shade and colour: 6.1.1 New work (two or more coats) over including water thinnable priming coat cement primer having VOC content less than gram/litre 6.2 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: 6.2.1 Two or more coats on new work 6.3 Removing dry or oil bound distemper, proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches complete. 7 REPAIRS TO BUILDING 7.1 Repairs to plaster of thickness 12 mm to 20 in patches of area 2.5 sq. meters and including cutting the patch in proper raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, complete as per direction of Officer-in-Charge. 7.1.1 With cement mortar1:4(1 cement: 4 coarsesand) 7.2 Providing & fixing White vitreous china closet squatting pan (Indian type) along with or “P” trap including dismantling of old WC and “S” or “P” trap at site complete with operations including all necessary materials, labourand disposal of dismantled material including malba, all complete as per the direction of Officer-in charge. 7.2.1 Orissa pattern W.CPan of size 580x440 mm 7.3 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Officer-in-Charge. 8 Dismantling and Demolishing 8.1 Demolishing R.C.C. work manually/ mechanical means including stacking of steel and disposal of unserviceable material within metres lead as per direction of Officer-incharge. 8.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, hold fasts etc. complete and stacking within 50 metres lead : 8.2.1 Of area 3sq.metres and below Disposal of building rubbish / malba / unserviceable, dismantled or waste materials 8.3 mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Officer-incharge, beyond 50 m initial lead, for all leads including all lifts involved. 9 SANITARYINSTALLATIONS 9.1 Providing and fixing Stainless Steel A ISI 304(18/8) kitchen sink as per IS:13983 with C. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 9.1.1 Kitchen sink with drain board 9.1.1.1 510x1040mm bowl depth 250mm 9.2 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 9.2.1 10 litre capacity-White 9.3 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 9.3.1 Semi rigid pipe 9.3.1.1 32mm dia 9.4 Providing and fixing 100mms and cast Iron grating for gully trap. 9.5 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 9.6 Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 10 WATER SUPPLY 10.1 Providing and fixing G.I. Pipes complete with G. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 10.1.1 15 mm dia nominal bore 10.2 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 10.2.1 15mmnominal bore 10.3 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 10.3.1 15mmnominal bore 10.4 Providing and fixing C.P. brass stop cock (concealed)of standard design and of approved make conforming to IS:8931. 10.4.1 15mmnominal bore 10.5 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 10.5.1 15mm nominal bore 12 WATER PROOFING 12.1 Providing and laying waterproofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IV th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @1.7 kg/sqm). 13 NEW TECHNOLOGIES AND MATERIALS 13.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite)solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity900N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Officer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra pay mention this account shall be made. 13.1.1 Frame size 45x85 mm 13.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives having minimum density of650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Officer-In- Charge. 13.2.1 30mmthick 14 Market Rate 14.1 Providing and fixing all size/design and type of factory made steel glazed/wire guaged doors, windows and ventilators side/top/centre hung of Cold Rolled Formed Continuous Seam Welded tubular profiles made from commercial MS sheet conforming to IS 513 of 1973, size of welded tubular/Z-Profiles and T-Profiles are 50X23 mm X 16 guage, Joints mitred and flush butt welded with 19X3 mm lugs 10 cm long embedded in cement concrete blocks 15X10X10 cm of CC 1:3:6 mix (1cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with rawl plugs & screws, as required including providing and fixing MS hooks & eyes (4 mm dia 125 mm length), 100X10 mm MS tower bolt, 75 mm Z shape 3 mm thick, MS handles and box type hinges (65 mm length of 2.55 mm thick sheet, GI pin of 6 mm dia) and ventilators and applying a priming coat of approved steel primer. The payment shall be made only for the profiles provided on actual weight basis. No extra payment shall be made for other accessories/fittings as mentioned in the item. 14.2 Providing and fixing stainless steel grade 304 curtain rod having wall thickness of 1.50 mm minimum with two stainless steel brackets fixed with S.S. screws andPVC sleeves etc., wherever necessary complete. 25 mm dia 14.3 Providing and fixing bright finished stainless steel piano hinges with SS Screws complete as per direction of the Officer-in-charge 14.4 Providing, fabrication, supplying, fixing/installation of factory made wardrobes made out of Pre Laminated HDHMR Board of 18 mm +/- 0.5 mm (Make action teas/century equivalent approved make) with all side edges lipped with 0.8 mm thick white PVC tape fixed with Hot Melt Glue and back is covered with mm thick Pre laminated HDHMR board fixed with necessary screws and shutter made out of plain HDHMR Board of 16 mm +/- 0.5 mm (Make action tesa/century/equivalent approved make) with one side 8 mm thick laminate & other side LAMINATE of same board with around the wardrobes of same board with laminate. All edges lipped with 1.3 mm thick PVC tape, This will not include the cost of hinges, channels other accessories, they will paid separately under relevant item. The rates include the cost loading transportation, unloading, all leads, lifts etc. up to all heights. 14.5 Providing and fixing C.P. brass shower orse with 15 or 20 mm inlet ESSCO JAQUAR make model (Shower-OHS-1989) or equivalent as per approved by Officer-in-charge. 125 mm dia 14.6 Providing and applying white cement based putty of average thickness 0.5 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 15 Credit item 15.1 Credit for old wooden door shutter 15.2 Credit to dismantled steel window grill/C.I. pipe/G.I. pipe/steel reinforcement/I-section. ELECTRICAL WORKS TO BE CARRIED OUT For Type- III/07 Wiring of light point, power plug, light plug points, inverter line with new ceiling fans(04), fresh fan (01), exhaust fan (01) & new light fittings, mirror light, decorative lamp (03), DBs, MCBs etc. For Type- III/39 Wiring of light point, power plug, light plug points, inverter line with new ceiling fans(04), fresh fan (01), exhaust fan (01) & new light fittings, mirror light, decorative lamp (03), DBs, MCBs etc. For Type- II/04 Wiring of light point, power plug, light plug points, inverter line with new ceiling fans(04), fresh air fan (01), exhaust fan (01) & new light fittings, mirror light, decorative lamp (03), DBs, MCBs etc. For Type-II/ 05 Wiring of light point, power plug, light plug points, inverter line with new ceiling fans(04), fresh air fan (01), exhaust fan (01) & new light fittings, mirror light, decorative lamp (03), DBs, MCBs etc. For Type-II/ 07 Wiring of light point, power plug, light plug points, inverter line with new ceiling fans(04), fresh air fan (01), exhaust fan (01) & new light fittings, mirror light, decorative lamp (03), DBs, MCBs etc. For Type-II/ 41 Wiring of light point, power plug, light plug points, inverter line with new ceiling fans(04), fresh air fan (01), exhaust fan (01) & new light fittings, mirror light, decorative lamp (03), DBs, MCBs etc.
|
