|
Maintenance Of Sos Mess And Quarter Guard Building At Mota Randha Irbn Campus At Dnh.(3Rd Call)- 1 Providing material and labour for Finishing wall with weather proof exteriormulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete 2 Providing material and labour for Distempeing (Two coats) with oil bound washable distemper of approved brand and manufactureand of required shade on wall surfaces to give an even shade, over and including a priming coat with alkali resistance primer of approved brand after thoroughly brushing the surface and other foreign matter and also including preparing the surface even and sand parpered smooth. 3 Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. 4 Applying two coats of putty& two coats of primer of approved brand and manufactureon new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. 5 Providing material and labour forPainting two coats (excluding priming coat) on previously paintedwoodand wood basedsurface withenamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign matter. 6 Providing material and labour for Painting three coats (excluding priming coat) on previously painted steel and other metal surface with enamel paint, brushing to give an even shade including cleaning the surfaceof all dirt, dust and other foreign matter. 7 Dismentalingtiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. 8 Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift. 9 Demolition of terrace including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(i) Brick tile covering. 10 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. 11 Providing and Iaying Ceramictiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 12 Demolition and disposal of unserviceable materials with all lead and lift.(i)Lime concrete. 13 Providing material and labour forlaying cementconcrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth. 14 Providing and laying marble stone slab flooring over 20mm (average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement slurry including rubbing and polishing complete.(A)Marble slab 25mm thick 15 Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement: 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour 16 Providing and fixing 12.5 Litres low level flushing cistern with a pair, ofC.I.or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.naI size brass ball valve with polythenefloat, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour 17 Providingand layingbrokenchine mosaic flooring for terrace using 12 mm to 20 mmbroken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope andtobe temperedtobring mortarcremeout uptosurface using white cement including rounding off junctions and extendingthem upto 15 cm along the waII,clearing with water and oxalic acid etc. as directed. 18 Providing and fixing pillar tap, capstanhead, screw down high pressure with screws, shanks and back nuts.(i) 15mm dia. 19 Providing and fixing screw down bib taps of following size.(B) Brasschromiumplated screws down Bib Tap. (i) 15mm dia. 20 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mm dia. 21 Providing material and labour for 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (ii)Cement mortar 1:4 (1-cement :4-sand) 22 Providing material and labour for20mm thick sand faced cement plaster on walls upto height 10metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete 23 Dismentaling of sheetroofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(i) G.I.sheet roofing. 24 Providing and fixing 150mm wide 450mm over all semicircularplain G.I.sheet class-3 gutter with Iron brackets 40mm x 3mm size Bolts, Nuts, washers etc. including making necessary connection with rain water pipes. (i) 0.80 mm thick Sheet. 25 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compressiontype fittings, wall clipsetc. including making good the wall ceiling and floor.(G)110 mm 26 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm. 27 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wal with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 28 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittingsas approved by Engineer In Charge. Pipe shall be fixed on the wal with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 29 Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter having extra reinforcement on sides & edges in polish finish. The core of the shutter& frame is tobe filed up with injectedpolyurethenefoam done in situ alongwith embedded wooden pieces for stiffening& also taking hinges & fintures. The whole FRP frame& shutter is to be water proof weather proof, termite proof & resistance to mild acid/alkali.Rates are to be inclusive of S.S hinges with necessary screws & alluminium S.S fixtures & fastenings& fastener sleeve. 30 Providing material and labour charge for fixing POWDER COATED ALLUMINIUM PARTITION withPipe section 63.50mm x 38.10mm x 1.95 mm including glazing clips and 25mm x 25mm x 1.80 mm having cross section C/Cnot more than 0.5 x 1.00 meter and using Hardener sheet 4mm thickfitting with rubber gasket and other fixture and fastening etc. complete as directed by Engineer in charge. 31 Providing material and labour forfixing Powder coated Alluminium DOOR with pipe section 63.50mm x 38.10mm x 1.95 mm including glazing clips and 25mm x 25mm x 1.80 mm having cross section C/C not more than 0.7 x 1.00 meter and using Hardnersheet / Modi Glass 4mm thickfitting with rubber gasket and other fixture and fastening and Door closer etc. complete as directed by Engineer in charge. 32 Providing and fixing chromium plated brass half trun flush cock of approvedquality including fixing in pipe line etc. complete.(i) 20mm dia. 33 Providing and fixing brass screw down stop tap.(A) 15mm dia. 34 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each 35 Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap. 36 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws andwashers. 37 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die castpowder coated and high U.V. & corrosion resistancewith diffuserwith company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED efficiency-110 lumens/watt LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgeluxmake LED used for luminaire. ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Tube Light with integral driver (d) 22-24 Watts, Surge - 2KV,IP-20,4 feet Cat-lll 38 Providing and erecting Approved make Ceiling fan with double ball bearingISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be approved by Engineer in charge] 39 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die castpowder coated and high U.V. & corrosion resistancewith diffuserwith company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %,CCT3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED efficiency-110 lumens/watt LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgeluxmake LED used for luminaire. ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (B) LED Lamps integral type, with PC diffuser suitableLAMP holder (b)5 to 8 watts cat-II 40 Supplying & erecting Steel tubular pole (Swaged) confirming to IS - 2713 (Part-II) 1980. Manufacturing process of steel tubular pole should be as per IS specification. Basic steel tube should beISI Marked. Pole should be painted by one coat of Zinc comet Primer and two coat of Aluminium /approvedpaint to be erected on / in existing Foundation. The length of poles are as below. (A) 7.5 mtr. Long Swaged Steel tubular pole(i)pole as per IS code 410-SP-4 with 300 X 300 X 4 mm base plate. (Approximate Pole weight 67 Kg) For burialerection 41 Supplying and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5mm/80mm or require size pole top having sufficient fastners for fixing the brackets and having suitable rise as per site condition as directed and spread of 2 mtr.with suitable welded stiffener reducer and with lock nut complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. Suitable for side entry fitting brackets of following nos of arms.[a] Single Arm bracket 2 Mtr 42 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. (fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and 10 kv non integral ,Light must have 440VAC line supply protection. It should withstand 48 hours for 440VAC line supply.(f) Above 60 watts to 90 watts 43 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables (B) 3 1/2core 50 Sq. mm ( 25 Sq.1/2 mmcore) 44 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size to be erected as directed. d) 1.50 Sq.mm 2 core round PVC sheathed 45 Supplying submersible pump set suitable for bore of 100 mm. dia. or more having three phase motor capacity not more than 5 H.P. with following capacity .(a) (25 stage) 120 to 125 LPM discharge at 155 to 120 mtrs. head respectively suitable for 50 mm dia. delivery pipe Cat.III 46 Supplying and erecting Direct-on-line, Starter with 15A.rating contractor and with 4-14A. range, directly operated thermal overload relay in sheet steel enclosure for 3phase 415V.50 c/s.A.C. motor up to 7.5 H.P.complete erected on P.W. Block with necessary connection.Cat.III 47 Providing and erecting ISI marked PVC insulated PVC SheathedFlat flexible Submersiblecopper cable approved make offollowing Size. (c) 3 Core x 4 Sq. mm 48 Excavation for foundation upto 1.5 m depth including sortingoutandstacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil 49 Painting of street light pole with bracket complete with two coats of Aluminium paint for following size of pole.[b] up to 6 mtr.
|
