|
1. Scope Of Task No. 1: A) The Main Goal Of Task No. 1 (Street Lighting Maintenance) Is To Maintain Street Lighting Devices In Proper Technical Condition To Ensure Their Proper Operation In Accordance With Applicable Regulations And Standards. B) Number Of Lighting Points: 4,159 Pcs. (Sodium Luminaires - 1,102 Pcs. And Led Luminaires - 3,057 Pcs.). The Ordering Party Allows Changes In The Number Of Maintained Points. Lighting: - Increase: Addition Of New Points, - Reduction: Liquidation Of Existing Points. The Maximum Scope Of Works That May Be Reduced By The Ordering Party Is Set By Up To 15%. C) Number Of Power Supply And Control Cabinets With Electricity Measurement Systems: 163 Pieces (Son And Sok). D) The Following Street Lighting Devices Are Subject To Maintenance: - Power Supply For Son/Sok Power And Control Cabinets, - Son/Sok Power And Control Cabinets With Equipment, - Circuits Cable And Overhead Lighting (Insulated And Non-Insulated Lines), - Luminaires, Light Sources, Fuses, - Poles (Overhead Lines - Żn And E Type Poles; Cable Lines - Metal And Concrete Poles), - Booms, Lightning Arresters, Clamps, Earthing. Inspections, - Operation Of Electricity Measuring Devices, - Operation Of Devices And Control Systems, - Updating Of Street Lighting Diagrams, - Maintaining Required Documents. F) A Significant Part Of Street Lighting Devices Are Installed On Lines Belonging To Pge Dystrybucja S.A.G) Lighting Is Controlled By: - Astronomical Clocks, - Lena Clue Software, - Moons Software. The Maintenance Contractor Will Be Obliged To Control The Lighting Using The Mentioned Systems And Software And Make Changes Agreed With The Ordering Party In Power Reduction Of Lighting Fixtures. H) Basic Scope Of Maintenance Of Son / Sok Lighting Cabinets: - Clean The Outside Of The Cabinet, - Describe The Cabinet In Accordance With The Numbers Given In The Lighting Diagrams For The City And Commune, - Check And Repair The Closing Of The Cabinet, - Clean The Inside Of The Cabinet, - Correctly Install Devices In The Cabinet, - Check And Adjust The Astronomical Clock, - Check The Operation And Correctness Of The Markings For Switching On The Cabinet For Automatic And Manual Operation ,- Check Circuit Protection,- Clean And Preserve Rusty Screws, Clamps, Etc.,- Paint The Structures Fastening The Cabinet To The Pole,- Check And Correct Wlz – Ty (From The Lv Line To The Son/Sok Cabinet),- Check If The Diagram Is Up To Date,- Replace Worn-Out Elements Of The Lighting Cabinet Equipment.I) Basic Scope Of Maintenance Of The Overhead Lighting And Cable Lines:- Inspection Of The Fastening Of Overhead Line Wires To Poles, - Regulation Of Overhead Line Wire Sags, - Inspection And Supplementation Of Lighting Fixtures Protection, - Inspection Of Lighting Fixtures Power Supply Cables, - Inspection Of Attachment Of Booms To Poles In Overhead Lines, - Cleaning And Painting Of Overhead Lines (In 2026 In Urban Areas; In 2027 In Rural Areas), - Inspection Of Protectors And Groundin
|
