|
3 D Printer H2d Base Unit 1. 1 Pc. 2. Fdm / Fused Deposition Modeling Printing Technology 3. Print Volume (One Head) No Less Than 325 × 320 × 325 Mm 4. Volume With Two Heads No Less Than 300 × 320 × 325 Mm. 5. Active Heating Of The Chamber (Convection / Temperature) Up To 65°C. 6. Travel Speed Up To 1000 Mm/S. 7. Maximum Acceleration Up To 20000 Mm/S². 8. Filament Diameter 1.75 Mm. 9. Supported Materials Pla, Petg, Tpu, Abs, Asa, Pa, Pc, Pva, Bvoh, Carbon Fiber/Glass Fiber Composites, Etc. 10. Security/Sensors No Less Than, Door Sensor, Temperature Detectors, Flame Detector, Laser Protection. 11. Case Dimensions No Less Than 490 × 510 × 620 Mm. -Extruder/Hotend 1. 2 Pcs. 2. Maximum Nozzle Temperature Is Not Less Than 350°C. 3. Supported Nozzle Diameters Are 0.2/0.4/0.6/0.8Mm. - Heated Platform (Heatbed) 1. 1 Pc. 2. The Maximum Table Temperature Is At Least 120°C. -Camera/Sensor Systems. 1. 1 Set. 2. Automatic Calibration System Using Lidar + Sensors. 3. Cameras / Visual Control Of At Least 4 Built-In Cameras. -Ams System 1. 1Pc. -Cutting Module 1. 1Pc. 2. Laser Module Power Of At Least 40W, With A Working Area In Xy Of At Least 310 X 250 Mm, Maximum Cutting Thickness Up To ~15 Mm For Plywood / Linden. -Air Assist. 1. 1Pc. -Air Filtration 1. 1Pc. -Documentation. 1. 1Pc. -User Manual 1. 1Pc., -Spot Welding Machine 1. 1Pc. 2. Input Voltage 220V Ac. 3. Power Consumption Is At Least 3Kw. 4. Maximum Current Is Not Less Than 6800 A. 5. The Number Of Welding Sides Is One. 6. The Thickness Of The Welded Metal Is Up To 2 Mm. 7. Number Of Operating Modes: At Least 7 Welding Modes/Channels. 8. Protective / Additional Functions: Effective Cooling, Overheating Protection, Mode Switching, Digital Control Panel. 9. Type Of Capacitor Welding: Transformer. -Block Base 1. 1 Pc. -Power Cable 1. 1Pc. -Welding Pliers Gun(S) 1. 2 Sets. -Set Of Electrodes/Nozzles 1. 1 Set. -Maintenance Tools 1. 1 Set. -Set Of Plates/Clamps For Extracting Dents 1. 1 Set. -Cooling System 1. 1Pc. -Trolley With Stand 1. 1Pc. -User Instructions 1. 1Pc. -Pedal 1. 1Pc., -Drilling Machine 1. 1 Piece. 2. Motor Power Not Less Than 500 W. 3. Motor Type Asynchronous. 4. Power Supply 220V. 5. Spindle Speed ~ 280–2350 Rpm. 6. Number Of Speeds 9. 7. Spindle Stroke Not Less Than 50 Mm. 8. Drilling Diameter Up To 16 Mm (In Metal). 9. The Size Of The Workbench Is Not Less Than 170X170mm. 10. The Size Of The Support Base Is Not Less Than 300X179mm. 11. The Height Of The Stand Is Not Less Than 430 Mm. 12. Weight Is Not Less Than 19 Kg. 13. Dimensions 520X380x260 Mm - Vise 1. 1 Piece. 1 Pc. - Key 1. 1 Pc. - Chuck 1. 1 Pc. - Protective Glass 1. 1 Pc. - Feed Handle 1. 1 Pc., Laptop 1. 2 Pcs. -Cpu Processor Level Not Lower Than Level 14 With At Least 8 Cores/12+ Threads, With A Clock Frequency Of At Least 4.5 Ghz. -Graphics 1. 2Pcs. 2. , -Ram Memory Of At Least 32 Gigabytes 1. 2 Pcs. 2. 32 Gb Ddr4 Or Ddr5, 1. 2 Pcs. 2. Ssd 3.0 Or 4.0 With A Capacity From 512 Gb To 1 Tb. -Display 1. 2Pcs. 2. At Least 15.6-Inch Full Hd (1920X1080) With A Refresh Rate Of 144 Hz, Providing Smooth Images. -Os 1. 2 Pcs. 2.Software Windows 10 Or Windows 11, -Ports And Connections 1. 2Pcs. 2. Usb 3.2, Usb-C, Hdmi 2.0B, Rj45 (Lan), 3.5 Mm Audio Jack, Wi-Fi 6 And Bluetooth 5.2., -Keyboard 1. 2 Pcs. 2. Illuminated, With Rgb Lighting In 1 Zone. -Camera 1. 2Pcs. 2. 720P Hd -Audio 1. 2Pcs. 2. Built-In Microphones And Speakers. -Power Adapter 1. 2Pcs. -Network Cable 1. 2 Pcs. -Documentation 1. 2 Pcs. -User Manual 1. 2 Pcs Mat 2 Pcs Carrying Bag 2 Pcs Manipulator 2 Pcs., Shadowless Lamp - Lamp With Led Panel 1.2 Pcs. 2. Power Of At Least 24W. 3. Material Metal, Plastic, Abs Plastic. 4. Mechanical Switch Type. 5. Brightness Adjustment Available. 6. Brightness Up To 2000 Lumens. -Spring Hinge Bracket 1. 3Pcs. -Desk Clamp 1. 3Pcs. -Power Cord With Switch 1. 3Pcs. -Operating Instructions 1. 3Pcs., Grinding Machine - Electric Grinding Machine 1. 1 Pc. 2. Power Of At Least 350 W. 3. Operating Voltage 220V. 4. Bore Diameter 16 Mm. 5. Speed 2840 Rpm. -Sharpening/Grinding Wheel 1. 2Pcs. 2. Circle Diameter 220 Mm. 3. The Thickness Of The Circle Is 20 Mm. -Metal Stop 1. 2 Pcs. -Protective Glass With Bracket 1. 2 Pcs. 2. Transparent Screens, Metal Casings - Operating Instructions 1. 1 Pc., Metalworking Workbench - Workbench 1. 1 Piece. 2. Dimensions (Dxdxh) No Less Than 1500 × 1800 × 2100 Mm. 3. Construction Reinforced Welded Structure Made Of High Quality Steel - Table Top 1. 1 Piece. 2. Mdf 30 Mm Thick With A 1.5 Mm Galvanized Sheet Metal Cover, With A Rubber Frame Around The Rim Of The Table. -Frame 1. 1Pc. -Legs 1. 4Pcs. -Shelves 1. 1Pc. 2. Maximum Load Up To 40Kg. -Perforation 1. 1Pc. - Cabinets 1. 3 Pcs. -Lighting 1. 1Pc. -Clamps 1. 1 Set. -Sockets 1. 2 Pcs. -Assembly Guide 1. 1Pcs., Soldering Iron, 60 W -Station 1. 30 Pcs. 2. Safety, The Unique Inactive State Function Allows You To Save Energy. When The Hair Dryer Is Placed On The Holder, The System Is Put Into A Standby State Of Readiness, The Hair Dryer Is Cooled. As Soon As The Hair Dryer Is Removed From The Holder, The System Returns To The Set Settings. 3. 3-Digit Led Display. 4. Maximum Power Consumption Of At Least 700W. -Power Cable 1. 30 Pcs. - Air Dryer (Thermal Hair Dryer) 1. 30 Pcs. 2. Air Dryer Type, Circular Impeller 3. Air Flow Not Less Than 120 L/Min Maximum 4. Temperature Range Of The Hair Dryer 100 °C - 450 °C 5. Temperature Stability Of The Blown Air 1 °C. Hair Dryer Handle Length 120 Mm. -Holder/Stand For Hair Dryer 1. 30 Pcs. -Hair Dryer Attachments 1. 30 Pcs. -Soldering Iron (Handle With Tip) 1. 30 Pcs. 2. Soldering Iron Maximum Power 60W. 3. Temperature Range Of The Soldering Iron Is 200 °C - 480 °C. 4. Heating Temperature Time Is No More Than 5 Seconds. -Soldering Iron Stand With A Sponge For Cleaning The Tip 1. 30 Pcs. -Wire Ball Mesh (Ball Wire) For Cleaning The Soldering Iron 1. 30 Pcs. - Soldering Iron Tips 1. 30 Pcs. -Antistatic Tweezers 1. 30 Pcs. -Solder (Tin) 1. 30 Pcs. -Desoldering Pump (Solder Extractor) 1. 30 Pcs. -Spare Heating Element For Soldering Iron 1. 30 Pcs. -Spare Heating Element For Hair Dryer 1. 30 Pcs., -Glue Gun (For 11Mm Rods) 1. 1Pc. 2. Supply Voltage 220V. 3. Power Not Less Than 100W. 4. Heating Time Is No More Than 5 Minutes. 5. Maximum Operating Temperature Is Not Less Than 140°C. 6. There Is An Anti-Drip System. -Glue Gun (For 7Mm Rods) 1. 1Pc. 2. Supply Voltage 220V. 3. Power Not Less Than 100W. 4. Heating Time Is No More Than 5 Minutes. 5. Maximum Operating Temperature Is Not Less Than 140°C. 6. There Is An Anti-Drip System. -Glue Sticks 1. 14 Pcs. 2. Diameters 7 Mm And 11 Mm. -Case 1. 1Pc. 2. The Weight Of The Set Is No More Than 1 Kg. -User Manual 1. 1Pc. - Stand Brackets 1. 2 Pcs., Jigsaw Machine, -Stationary Jigsaw Machine 1. 1Pc. 2. Engine Power Of At Least 120 W. 3. Voltage 220V. 4. Speed ~ 400–1600 Rpm. 5. The Amplitude Of The Saw Stroke Is At Least 14 Mm. 6. The Size Of The Desktop Is At Least 408×250Mm. 7. Table Tilt 0–45°. 8. Depth Of Cut At 90°: Up To 52Mm, At 45°: Up To 20Mm. 9. There Is A Vacuum Cleaner Connection Via An Adapter With A Diameter Of 36Mm. -Saw Blade 1. 2 Pcs. -Transparent Protective Screen 1. 1Pc. - Workpiece Clamp 1. 1 Pc. -Adapter For Connecting Vacuum Cleaner 1. 1 Pc. -Instruction Manual 1. 1Pc.
|
