|
Tender For Repair To Certain Road Including Road Furniture At Af Station Gorakhpur; 1 Scarifying or picking gravelled macdum or bituminous macadum surfaces in area not exceeing 400 Sqm, exceeding 50 mm and not exceeding 100 mm deep complete all as specified and as directed. 2 M&L 7.5cm compacted thickness WBMwith coarse aggregate 9granite, trap or basalt) of grading 2 (63 to 40 mm), spread rolledand compacterd to gradient and camber required complete all as specified and directed. 3 Preparing of unsurfaced WBM surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etcand applyingevenly a tack coatwith bituminous primer using paving bitumen of grade VG-10@ 10 Kg per ten square metrecomplete all as specified and as directed. 4 Supply and filling 100 mm spread thickness of Moorum/Red bajri spread, rolledand consolidated to gradient and camberrequired including scrapping/cleaning of road side berms complete all as specified and as directed . 5 Repair to potholes any depth, not exc1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) but making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm all as specified. 6 Preparing of existingold black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etcand applyingevenly a tack coatwith bituminous primer using paving bitumen of grade VG-10@ 5 Kg per ten square metrecomplete all as specified and as directed. 7 M&L 75 mm or less consolidated thickness premix bituminous macadamusing binder paving bitumen grade VG-30 at the rate of 4% of total mix weight by using Hot mix plant for mixing andmechanical paver for laid/rolled and compacted to required gradient and camber complete all as specified and directed.Note:-Work shall be executed as perapproved design mix from NABLGovt approved lab /Govt Engg College as decided by GE.(ii) Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to the Government. 8 M&L Providing bituminous premixsemi denseasphaltic concrete 30 mmconsolidated thickness with minimum5.0 % binder contentby weight of total mix, using paving bitumen VG-30using hot mix plant and laidby using mechanical paver, rolled and compacted to required camber and gradient complete all as specified and as directed.Note :- (i)Work shall be executed as perapproved design mix from NABLGovt approved lab /Govt Engg College as decided by GE.(ii) Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to the Government. 9 S&Fin replacement cat eye reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model No DA 972.0 fixed with and including mild steel stud of suitable sizecomplete all as per manufacturers instructioncomplete all as specified and directed 10 S&F in replacement solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25 mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4V/0.3 Watt one NI-ed recharageable battery (1.2V/1600MA) consiting of super bright LED with 10,000 to 18,000 mcd complete all as per manufacturer instructions complete all as specified and directed. 11 M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirmingto BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.Note:- (i)Road marking work shall be carried out in accordance with manufactures instructions and as specified.(ii)ReferMORTH specification ofPara803.4.2.1 and 800.4.2.2 on bituminous surface in white colour or yellow colour and super imposed with glass beads confirming to BS 6088 and MORTH specificationPara 803.4.3.3 12 S&F for frontier 80 cm outdoor convex mirror,FCMO-80 with 75 mm dia 2.5 m long mild steel pole andsuitable bracket for fixing of convex mirror including applying two coat synthetic enamel paint over one coat of red oxide primer on exposed surfaces of steel work with necessary excavation and earth work as required andfixing pole in cement concrete 1:3:6 type-C-2using 20 mm graded stone aggregatetorequred heightas per manufacturers instructioncomplete all as specified and directed. 13 Supply and fixing in repairspeed breakermade outof ABC material having size 350mmx50mmx250mm ,two highly reflective reflectors moulded in PMMA material are welded with ABS platethrough ultrasonic welding process and then fixed on to the speed breaker so that dust and water cannot touch reflectors inside and thus it maintains its reflectivity for a long time of Model-DA-1005 complete all as specified and as directed. 14 Supply and fixing in repair speed breaker made out of ABC material having size 750mmx75mmx250mm ,two highly reflective reflectors moulded in PMMA material are welded with ABS platethrough ultrasonic welding process and then fixed on to the speed breaker so that dust and water cannot touch reflectors inside and thus it maintains its reflectivity for a long time of Model-DA-1006 complete all as specifed and as directed. 15 S&F in replacement of metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in cement concrete 1:2:4type B-1 using 20 mm graded stone aggregate having size 150mmx150mmx300mm including necessary excavation and earth work complete all as specified and as directed. Make:- 3M /Dark eye/Gogia Plastic as approved 16 S&F in replacement of solar dealineatorplate length 1000mmx47mmmade out of polycarbonate and toughened aluminiumbody, height 145mm , diameter 80 mm , comprises of 4 super bright LEDwhich give 360 degree viewing solar panel 2.5 V,120 mm (approx) 1.25 V rechargeable battery 01 No complete all as specified and as directed. Make:- 3M /Dark eye/Gogia Plastic as approved
|
