|
Supply And Installation Of Work Plate With Galvanized Sheet And Wooden Structure, Aluminum Conduit, Type External Diameter = 35Mm, Thickness = 3Mm, Hole Diameter = 18Mm, Zinc Plated Steel Screw, Hexagonal, With Full Thread, Diameter 5/16, Length 3/4, With Nut And Light Flat Washer, 11/19/2025 - 10:27:05, Support For Plain Or Perforated Steel Cable Rail Galvanized, 400 Mm Wide, In Profile With A Length Of 45 Cm Fixed To A Slab, Per Meter Of Fixed Cable Tray. Af_09/2023, Blind Aluminum Cover For 1/2 And 3/4 Conduit, 90 Degree Bend For Conduit, Galvanized Steel, Dn 20 Mm (3/4, Steel Clamp For Type U Conduit Simple 3/4, Set Of One (1) Data Socket (Rj45 Cat.6E Connector), With One (1) Post 4X2 Plate, Including Supply, Installation, Support, Module And Plate, Set Of Two (2) Data Sockets (Rj45 Cat.6E Connector), With Two (2) Post 4X2 Plate, Rj45 Male Connector/Plug, Category 6, Including Protective Cover And Crimping, Exclusive Certification, Patch Panel 24 Ports Cat 6 19, Rj45/Rj45 Patch Cord (Connection: Rj45|Cable: Metallic Utp-4P|Category: 6|Pinout: T568a|Length: 2M), Utp Cable With Four (4) Pairs, Lszh Classification, With Non-Insulation Halogenated And Flame Retardant, Exclusive Rj45 Male Connector/Plug And Crimp, Sliding Tray For Rack 19, 1U Cable Organizer For Rack 19, Wired Tp Switch - Gigabit Link 24 Tl Ports - Sg1024d., Smooth Electrodeduct (100X50)Mm In Galvanized Steel Sheet#18, With Treatment Pre-Zinc Plated, Including Snap-On Cover, Superior Fixing, Connections And Accessories, 90° Horizontal Or Vertical Bend Or Elbow For 100X50mm (Lxh) Electrical Trunk, With Cover Ref 97278, Amendment For Smooth Or Perforated Electrical Trunking - 100X50mm (Lxh) Ref 97251, Rigid Conduit, Galvanized Steel A Hot, Heavy, Dn 20Mm (3/4), Apparent, Including Adp Connections Ref 104406, Tray/Shelf 400Mm Fixed 4 Points Server Rack 19, Rack - Ruler 19 With 6 Sockets Protection Fuse And Pigtail 2.5M, Electrolytic Galvanized Conduit Sleeve 3/4, Sleeve Galvanized Electrolytic Conduit 1, Stabilizer 127V, 60Hz 5.0Kva, Floor Rack 28U Galvanized For 100 3.5, Screw, Self-Tapping, Flat Head, Single Slot, Zinc Plated Steel, 1/4 (6.35 Mm) (20Mm) With One (1) Standard Socket, Three (3) Poles, Current 10A, Voltage 250V, (2P+T/10A-250V) And One (1) Post Plate, Exclusive Condulet., Aluminum Blind Cover For Condulet 1/2 And 3/4 - 3.9, Din Type Monopolar Circuit Breaker, 16A Rated Current, Supply And Installation, Including Eyelet Terminal, Dn 20 Mm (3/4 - 3.11, Dn 25 Mm (1), Apparent - Supply And Installation. Af_10/2022, Steel Clamp For Single U Type Conduit 3/4 - 3.13, Steel Clamp For T Conduit
|
