|
Tender For Provision Of Otm Accommodation At Saugor Under Ge Saugor.; 2 GENERAL SUMMARY 3 Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule ‘A’Part-I (Ref prepriced schedule attached seperately) 4 Lump sum price worked out by the contractor for SCHEDULE ‘A’ PART- II (INTERNAL WATER SUPPLY WORKS) as listed in Schedule ‘A’Part- II (Ref prepriced schedule attached seperately) 5 Lump sum price worked out by the contractor for SCHEDULE ‘A’ PART-III (INTERNAL ELECTRIFICATION WORKS ) as listed in Schedule ‘A’Part -III (Ref prepriced schedule attached seperately) 6 Lump sum price worked out by the contractor forSCHEDULE ‘A’ PART-IV (EXTERNAL ELECTRIC SUPPLY WORKS) as listed in Schedule ‘A’ Part-IV (Ref prepriced schedule attached seperately) 7 Lump sum price worked out by the contractor forSCHEDULE "A" PART-V (SEWAGE DISPOSAL WORKS) as listed in Schedule ‘A’Part-V (Ref prepriced schedule attached seperately) 8 Lump sum price worked out by the contractor for SCHEDULE ‘A’ PART-VI(ROAD, PATH AND CULVERT WORKS) as listed in Schedule ‘A’Part-VI(Ref prepriced schedule attached seperately) 9 Lump sum price worked out by the contractor forSCHEDULE "A" PART-VII (AREA DRAINAGE WORKS) as listed in Schedule ‘A’Part-VII(Ref prepriced schedule attached seperately) 10 Lump sum price worked out by the contractor for SCHEDULE "A" PART- VIII (COMPOUND WALL, FENCING AND GATE WORKS) as listed in Schedule ‘A’Part-VIII(Ref prepriced schedule attached seperately) 11 Lump sum price worked out by the contractor forSCHEDULE "A" PART-IX (RETAINING WALL WORKS) as listed in Schedule ‘A’Part-IX(Ref prepriced schedule attached seperately) 12 Lump sum price worked out by the contractor forSCHEDULE ‘A’ PART-X (CONDUIT FOR TV & TELEPHONE WIRING WORKS)as listed in Schedule ‘A’Part-X(Ref prepriced schedule attached seperately) 13 Lump sum price worked out by the contractor forSCHEDULE ‘A’ PART-XI (SOLAR ROOF TOP SYSTEM WORKS) as listed in Schedule ‘A’Part-XI(Ref prepriced schedule attached seperately) 14 Lump sum price worked out by the contractor forSCHEDULE ‘A’ PART-XII (EXTERNAL WATER SUPPLY WORKS)as listed in Schedule ‘A’Part-XII(Ref prepriced schedule attached seperately) 15 Lump sum price worked out by the contractor for SCHEDULE ‘A’ PART – XIII (EXCAVATION, EARTH WORK & SITE CLEARANCE WORKS) as listed in Schedule ‘A’Part- XIII (Ref prepriced schedule attached seperately) 16 Lump sum price worked out by the contractor for SCHEDULE ‘A’ PART – XIV ( DEMOLITION / DISMANTLINGWORKS) as listed in Schedule ‘A’Part- XIV (Ref prepriced schedule attached seperately) 17 SCH "A" Pt - XV (MISCELLANEOUS ITEMS) 18 Ext Electric Supply NOTE:- For items of Ext Electric Supply notes given at the beginning of Sch ‘A’ Part-IV ( Ext Electric Supply) shall also be applicable. 19 M&L for supply, installation, connecting and commissioning ofCPRI approved main LT distribution ACB, outdoor type, both side openable including locking arrangement with sliding door bolt, cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15mm thick MS sheet with anti-corrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4 Nos insulated bus bar each made of high conductivity aluminium of size not less than 1.25 times of main incomer, prewired with suitable size of copper cable/insulated copper strip including PCC work and iron work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following.(A) INCOMING(i) ACB, 4 Pole, 415V, 50HZ 800 Amps with rupturing capacity 36 KA-01Nos(B) OUTGOING(i) Digital Multifuction meter withselector switch and three current transformers of suitable ratio and capacity -01 Set(ii) LED type Phase indicator lamps for three phases set of three - 01 set(iii) Bus bar chamber having insulatedaluminium, each suitable for 800 Amps for three phases and neutral -01 set(iv) MCCB, 4 Pole,415V, 50HZ 400 Amps with rupturing capacity 36 KA-02 Nos(v) MCCB, 4 Pole,415V, 50HZ 63 Amps with rupturing capacity 10 KA-01Nos(vi) 3 phase street light timer of capacity5 KW at 415V = 01 20 M&L for supply, installation, connecting and commissioning ofCPRI approved main LT distribution panel, outdoor type, both side openable including locking arrangement with sliding door bolt, cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15 mm thick MS sheet with anti-corrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4 Nos insulated bus bar each made of high conductivity aluminium of size not less than 1.25 times of main incomer, prewired with suitable size of copper cable/insulated copper strip including PCC work and iron work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following.(A) INCOMING(i) MCCB, 4 Pole, 415V, 50HZ 300 Amps with rupturing capacity 36 KA-01Nos (B) OUTGOING(i) Digital Multifuction meter withselector switch and three current transformers of suitable ratio and capacity -01 Set(ii) LED type Phase indicator lamps for three phases set of three - 01 set(iii) Bus bar chamber having insulatedAluminium for three phases and neutral -01 set(iv) MCCB, 4 Pole,415V, 50HZ 100 Amps with rupturing capacity 16 KA-02 Nos(v) MCCB, 4 Pole,415V, 50HZ 63 Amps with rupturing capacity 10 KA-04Nos 21 M&L for supply, installation, connecting and commissioning ofCPRI approved main LT distribution panel, outdoor type, both side openable including locking arrangement with sliding door bolt, cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15mm thick MS sheet with anti-corrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4 Nos insulated bus bar each made of high conductivity aluminium of size not less than 1.25 times of main incomer, prewired with suitable size of copper cable/insulated copper strip including PCC work and iron work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following.(A) INCOMING(i) MCCB, 4 Pole, 415V, 50HZ 400 Amps with rupturing capacity 36 KA-01Nos (B) OUTGOING(i) Digital Multifuction meter withselector switch and three current transformers of suitable ratio and capacity -01 Set(ii) LED type Phase indicator lamps for three phases set of three - 01 set(iii) Busbar chamber having insulatedAluminium busbar, each suitable for 400 Amps for three phases and neutral -01 set(iv) MCCB, 4 Pole,415V, 50HZ 160 Amps with rupturing capacity 25 KA-01 Nos(v) MCCB, 4 Pole,415V, 50HZ 40 Amps with rupturing capacity 10 KA-04Nos(vi) MCB SPN 240V, 50HZ 40 Amps,10KA -08Nos(vii) MCB SPN 240V, 50HZ 63 Amps 10KA -01Nos 22 M&L for supply, installation, connecting and commissioning ofCPRI approved main LT distribution panel, outdoor type, both side openable including locking arrangement with sliding door bolt , cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15mm thick MS sheet with anti-corrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4 Nos insulated bus bar each made of high conductivity aluminium of size not less than 1.25 times of main incomer, prewired with suitable size of copper cable/insulated copper strip including PCC work and iron work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following. (A) INCOMING(i) MCCB, 4 Pole, 415V, 50HZ 100 Amps with rupturing capacity 25 KA-01Nos (B) OUTGOING(i) Digital Multifuction meter withselector switch and three current transformers of suitable ratio and capacity -01 Set(ii) LED type Phase indicator lamps for three phases set of three - 01 set(iii) Busbar chamber having insulated aluminium busbar, each suitable for 100 Amps for three phases and neutral -01 set(iv) MCCB, 4 Pole,415V, 50HZ 63 Amps with rupturing capacity 36 KA-01 Nos(v) MCCB, 4 Pole,415V, 50HZ 40 Amps with rupturing capacity 10 KA- 03Nos(vi) MCB SPN 240V, 50HZ 32 Amps, 10KA-01Nos(vii) MCB SPN 240V, 50HZ 40 Amps,10KA-01Nos 23 Supply & fix junction box single pole and neutral enclosure compression gland 2 with connector and clamp for pole mounting with two nos of nut bolt and washers and socket complete of size not less than 12 " x 10" x4" complete all as specified and directed.Make : Sintex/ Hensel 24 S&F tubes galvanised 40mm bore light grade ISI Marked bent to shape of bracket 1.2 mtr in length for mounting of street light fitting and fixed to pole with clamps and nut bolt and washer with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 25 Taking down old existing transformer and shifting into MES substation yard complete all as specified and directed. 26 SEWAGE DISPOSAL NOTE:- For items of Sewage Disposal notes given at the beginning of Sch ‘A’ Part-V ( Sewage Disposal) shall also be applicable. 27 S&F HDPE double wall corrugated sewagepipe 150mm internal bore SN-8 ISI Mark as per IS: 6908 Part II 2013 laid in trenches joined and tested as per manufacturer"s instructions complete all as specified and directed. 28 Construction of RCC septic tank designed to carry sewage and sludge water including excavation and earth work in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in walls, base slab, baffle walls and roof slab including beams etc with vent shaft, manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 150 users (CONVENTIONAL pattern) complete all as specified and directed. 29 Construction RCC septic tank designed to carry sewage and sludge water including excavation and earth work in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in walls, base slab, baffle walls and roof slab including beams etc with vent shaft, manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 100 users (CONVENTIONAL pattern) complete all as specified and directed. 30 Construction RCC septic tank designed to carry sewage and sludge water including excavation and earth work in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in walls, base slab, baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users (CONVENTIONAL pattern) complete all as specified and directed. 31 Construction of soakage wells including excavation and earth work in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 Design Mix concrete including intercepting chamber and screen chamber made ofbrick masonry in CM, RCC cover slab in M25/SFRC cover, inter-connecting pipes of RCC/DWC complete filled with brick bats2.40m x 3.00m effective depth complete all as specified and shown on drawing No TD NoCEBZ/TD/78/2011. 32 COMPOUND WALL, FENCING AND GATE WORKS NOTE:- For items of COMPOUND WALL, FENCING AND GATE WORKS notes given at the beginning of Sch ‘A’ Part-VIII ( COMPOUND WALL, FENCING AND GATE WORKS) shall also be applicable. 33 Provision of steel gate 5.50m wide in double leaf, including RCC (M-25) pillars, excavation and earth work, formwork, reinforcement bars, painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer, three coats of white wash over plastered surfaces of pillars complete all specified and shown on Drg No CEBZ/STD/104 of 2011. 34 Provision of steel gate 8.00m wide in double leaf, including RCC (M-25) pillars, excavation and earth work, formwork, reinforcement bars, painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer, three coats of white wash over plastered surfaces of pillars complete all specified and shown on Drg No CEBZ/STD/104 of 2011. 35 (CONDUIT FOR TV & TELEPHONE WIRING WORKS)NOTE:- For items of CONDUIT FOR TV & TELEPHONE WIRING WORKS notes given at the beginning of Sch ‘A’ Part-X ( CONDUIT FOR TV & TELEPHONE WIRING WORKS) shall also be applicable. 36 S&F RJ 11 telephone socket with shutter, 1 module including modular cover plate, metal flush box (16 gauge) concealed in wall/roof complete all as specified anddirected. 37 S&F RJ 45 computer jack with cat no 6 socket, 1 module including modular cover plate, metal flush box (16 gauge) concealled in wall/roof complete all as specified and directed. 38 SOLAR ROOF TOP SYSTEM)WORKS NOTE:- For items of SOLAR ROOF TOP SYSTEM)WORKS notes given at the beginning of Sch ‘A’ Part-XI ( SOLAR ROOF TOP SYSTEM)WORKS) shall also be applicable. 39 Design, supply, installation, testing and commissioning of ON Grid connected roof top solar generation system of capacity not less than 55 KWp AC capacity all as specified in PS and directed as per PS clause and specification as follows (for (For Adm Bldg):-(A) Supply, Installation, testing and commissioning of not less than 55 KWp SPV system comprising of latest specification DCR solar photo voltic modules/array of high efficiency made of mono crystalline silicon solar PV cells with supply and fix of terminal box on the module havingprovision for opening & replacing the cable etc.as per IEC. The general features of PV modules shall be as given below :- a) The module shell be made up mono crystalline silicon cells.b) The interconnected cells shall be laminatedin vacuum to withstand adverse environmental conditions. c) The module frame is made of corrosion resistant materials, preferably having aluminium anodized finish. d) The minimum clearance between the lower edge of the modules & the developed ground level shall be 300 mm.e) Surge arresting devices to be provided at junction box and module shall be provided with bypass diode.f) The SPV module must be IEC 61215, IEC 61730 part I & part II, IEC 61701 certified from any of the accredited certifying agencies.g) Each solar PV module must be warranted by manufacturer at least 90% rated power at the end of 10 years & 80% at the end of 25 years. Note: Qty of PV module shall be decided as per OEM recommendation, design and layout drawing submitted to department duly approved by GE. 40 Note :-(i) Makes of panel provided shall be as per MNRE specification/ standard and registered in ALMM. (ii) 5% spare qty of modules shall be provided by the contractor for repair / replacement purpose. (iii) Addln module shall be provided / installed by the contractor to meet specified power output incase if the same not achived during testing and commissioning without any extra cost.(iv) Each PV module used in any solar power project must use a RF identification tag. The following information must be mentioned in the RFID used on each module:-(v) Name of the manufacturer of PV Module(vi) Name of the Manufacturer of Solar cells(vii) Month and year of the manufacture for solar cells and the module(viii) Country of origin (Make in INDIA only)(ix) I-Vcurve for the module(x) Wattage, Im, Vm and FF for the module(xi) Unique Serial No and Model No of the module(xii) Date and year of obtaining IEC PV module qualification certificate(xiii) Name of the test lab issuing EC certificate(xiv) Other relevant information on traceability of solar cells & module. 41 (B) Module Mounting Structure (MMS) :-Supply & fixing of the anti-corrosive factory made Gl structure on the RCC Roof for fixing of PV modules by fixing of suitable size fastner, spring washer, nuts & bolt. The minimum thickness of galvanization & mounting steel structure shall be as per IS 47592 & IS 2061-1992 respectively withstand the wind load of 180 Km/hr. as per IS 875. The array structure shall be fixed properly using maintenance free earthing kit. Note:-(i)The total load for roof top SPV should be less than 60 Kg/m2.(ii) The design of module mounting structure complying load withstand as per relevant IS alongwith fixing arrangement on roof shall be submittedby the contractor duly vetted from IIT/NIT/Govt Engg college for approval by GE.(iii) The material shall be corrosion resistant and electrolyticaly compatible with material used in module frame. (iv)The fasteners should be of stainless steel and should allow easy replacement of any module.(v) The minimum clearance of the structure from the roof level should be 300 mm. 42 (C) Solar DC Cables:- (i) Supply & laying of 1.1kv single core multi strandedPVC FRLSH insulated & unsheathed copper wire/ copper cable for 3 ph supply in ISI marked PVC rigid conduit pipe by saddling as per IEC. (For Solar Array DC supply connection). Note : (i) The size of cable shall be as per design given by OEM & approved by GE.(ii)Cable should be passes through PVC rigid pipe and pipe should be fixed properly inside cable tray for easily maintenance, is included in quoted rate(D) DC Combine boxA DC combine box shall be used to combine the DC cables of the solar module array with DC fuse protection for the outgoing DC cables to the DC distribution box. 43 (E) Array junction boxes_-The number of junction boxes as per design given by OEM are to be provided in the PV array for termination of connecting cables. All wire/cables must be terminated through cable lugs. Copper busbar/terminated blocks housed in the junction box conforming to IP 65 degree of protection with EPDM rubber gasket to prevent water entry. Junction boxes shall be mounted on the MMS such that they are easily accessible and protected from direct sunlight & harsh weather. (F) On Grid Power Conditioning unit ( Inverter):-Supply & installation of 415V 3-ph, 50 Hz microprocessor DSP type grid connected Inverters which converts DC energy produce by the solar array to AC energy such that it synchronizes with the existing AC power source on site. Provisioning of power manager to get all parameter details. The Inverter shall have inbuilt MPPT (Maximum Power Point Tracker) feature so as to extract maximum power from PV modules & the MPPT units environmental testing should qualify IEC 60068-2 (1,2,14,30)/ Equivalent BIS standard. (The voltage variation of +/- 10% & frequency variation +/-3 Hz)Note :-(i) No of inverters shall be provisioned as per design given by OEM. (ii) Inverter should have internal protection arrangements against any sustainable fault in feeder line and against the lightning on feeder.(iii) Should have isolating transformer(iv) Inverter efficiency >93% with inbuilt galvanic isolation) (v) No load losses shall be less than 1% of rated power.(vi) The above quoted rate is inclusive of MS structure stand duly fixed and placing inverter. 44 (G) Solar meter & Net meter:-As per DISCOM requirement, to be provided at main MRS. Cost of Solar meter & Net meter, installation, connected accessories, necessory liasioning with DISCOM are included in quoted Rates. If DISCOM desires installation of above meters through deposit work including NOC if required, then cost of deposit shall be made by contractor and amount shall be included in quoted rates.(H) AC Distribution Board:-(i) Supply & installation of 415V 3-ph 50Hz AC distribution board control AC power from Inverter & provided by nacessary surge arrestors system and suitable capacity MCCBs.; Qty-01 No Note: ACDB shall be provided as per OEM design as approved by GE.(J) AC Cables:-(ii) Distribution wiring in 1.1kv single core multi stranded PVC FRLSH insulated & unsheathed copper wire fixed on wall on PVC batten or saddle(For AC power supply from Inverter to AC distribution board Panel).Note :- (i) The size of cable shall be as per design given by OEM & approved by GE. 45 (K) Protection:-The system shall be provided with all necessary protection like earthing, lightening & surge protection as per relevant standard.(L) Performance testing:-Ratio between the theoretical energy outputs of the SPV plant is termed as performance ratio and is measured in accordance with IEC 61724. Based on prevailing climatic and temperature conditions in India, a performance ratio of 75% is expected for crystalline modules. (M) Other Misc items:-As per requirement given by OEM and approved by GE to be provided.(N) Earthing:_As per MNRE specifications to be provided.(O) Lightening protection:-As per MNRE specifications to be provided.(P) Installation, Testing & Commissioning:-As per safety norms of SERC/CEA to be provided.(Q) O&M and Warranty:-5 years from the date of commissioning to be provided. 46 Note: The quoted rate is deemed to be inclusive also of the following:-(i) Transportation charges with Transportation Insurance for the all material of on grid solar roof top system including loading & unloading at site from workshop.(ii) Insurance for the complete system for the 5 years.(iii) AMC-Suraksha which include 24 Hour site maintenance visits, response time 2 hrs and turn around time 48 hrs, Monthly plant performance report. (iv) As per performance obligation, the contractor shall maintain minimum capacity utilization factor (CUF) of 13%. The report shall be submitted by the contractor to GE as per guidelines promulgated by SECI. (v) Satisfactorily testing and commissioning of the system is to be done by the contractor in presence of the rep of accepting officer and the report of the complete system is submitted to department.(vi) Guarantee and warranty of solar panel and connected devices is to be submitted to department. (vii) The report of generated unit of solar power on monthly basis is to be submitted to office. 47 (viii) The cost of appropriate civil structure (Hot Dip Galvanised Iron structure) shall be included in quoted rate. The Civil structure incorporating Solar PV modules (arrays) should withstand the gusts of wind /cyclonic wind upto 150 km/hr from backside of panel.(ix) PV modules will be guaranteed against any manufacturing defect for 10 Years.(x) The contractor shall submitt design vetted from National Institute of Solar Energy or by Govt Institute authorised by MNRE or NISE or any reputed institute/ agency authorised.(xi) The quoted rate shall be inclusive of all the components as specifed here-in-above as well as Particular Specification, unless otherwise specified.(xii). Suitable fastening arrangement such as grouting and calming should be provided to secure the installation against the specific wind speed. The Empanelled Agency shall be fully responsible for any damages to SPV System caused due to high wind velocity within guarantee period as per technical specification. 48 All as per the description of Serial Item No 39 here-in-before but of 35 kwp AC capacity (ONE for Single Living Accn & One for Cook House Cum Dining Hall ). 49 Supply and fixing heavy duty self priming monoblock pump for cleaning of Solar Panel through pressure and fitted on mild steel base plate, having discharge of 638 gallon/hour at a pressure head of 15-42m complete with standard accessories including 1-HP, single phse, 220V rating electric motor complete with DOL starter of suitable rating complete all as specified and directed. 50 Supply and fix flexible, anti-twist, weather resistant, UV resistant thick water hose PVC pipe of size 15mm nominal dia for optimal water flow with leak proof tap adapter compatible with delivery pipe of mono-block pump (as specified in above item) with suitable reducer/enlarger with clamp for cleaning and washing of solar panels complete all as specified and directed. Note :- Make or quality as approved by GE. 51 Supply and fix adjustable type water spray gun compatible with PVC hose size of 15mm nominal dia, built of high quality brass material, durable and rust-proof, solid brass structure to ensure quick connection and with durable accessories, can withstand uptoPSI water pressure, and without any leakage of water complete all as specified and directed.Note :- Make or quality as approved by GE. 52 EXT WATER SUPPLYWORKS NOTE:- For items of EXT WATER SUPPLYWORKS notes given at the beginning of Sch ‘A’ Part-XII (EXT WATER SUPPLYWORKS) shall also be applicable. 53 Supply, laying, connecting, jointing and testing Centrifugally cast (spun ) 150mm dia ductile iron pressure pipe ISI Marked conforming to IS-8329-2000 ( Reaffirmed -2005 Edition 4.1 ) of following size with socket spigot ends, suitable for "Push on Joints ( Tyton Joint )" each standard working lengths supplied with rubber gaskets duly ISI marked for water supply, ClassK-9 with socket with cement mortar lining inside and metallic Zinc coating with finishing layer of bituminous paint on outside the pipe with out polythylene sleeves but including "Push on Joint" supplied with ISI Marked EPDM rubber gasket conforming to IS-5382-1985 ( reaffirmed-2003 ) laid in trenchescomplete all as specified and directed 54 Supply, laying, connecting, jointing and testing centrifugally cast ( Spun ) 80mm dia Ductile iron Pressure pipe ISI Marked confirming to IS-8329-2000 ( Reaffirmed -2005 Edition 4.1 ) of following size with socket spigot ends, suitable for "Push on Joints (Tyton Joint )" each standard working lengths supplied with rubber gaskets duly ISI marked for water supply, ClassK-9 with socket with cement mortar lining inside and metallic Zinc coating with finishing layer of bituminous paint on outside the pipe with out polythylene sleeves but including "Push on Joint" supplied with ISI Marked EPDM rubber gasket conforming to IS-5382-1985 ( reaffirmed-2003 ) laid in trenches complete all as specified and directed. 55 M&L for bends (any type, radius and angle) tapers and y type, (straight, bends increasing, decreasingor double socket etc.( Tee pieces single branch, "Y" junction, double branch, cross (all socketed or socket and spigot) collars caps and plugs complete all as specified and directed. 56 S&F 300mm dia sluice valve CI body ISI marked class PN 1.6 heavy duty flanged ends cast iron wheel with brass spindle (ISI marked) conforming to IS:14786-2000, short body all as specified including nuts, bolt, washers and gasket complete all as specified and directed 57 M&L for construction of brick masonry valve pit chamber of size 1200 x 1200 x1000mm including necessory earth work, PCC, copping plastering on internal surfaces of valve pit. Framed work for the valve pit chamber cover made of MS sheet 3mm thick conforming to Fe410-o and Fe 310-o, angle of size 40 x 40 x 5mmincluding welding, cutting, hinges locking arrangement complete and applying two coats synthetic enamel paint over a coat of red oxide primer on the valve pit cover complete all specified and directed. 58 M&L for construction of brick masonry valve pit chamber of size 900 x 900 x 600mm including necessory earth work, PCC, copping, plastering on internal surface of valve pit. Framed work for the valve pit chamber cover made of MS sheet 3mm thick confirming to Fe410-o and Fe 310-o, angle of size 40 x 40 x 5mm including welding, cutting, hinges locking arrangement complete and applying two coats synthetic enamel paint over a coat of red oxide primer on the valve pit cover complete all specified and directed 59 SCHEDULE ‘A’ PART – XV ( DEMOLITION / DISMANTLINGWORKS) 60 Taking down main switch, DB box including MCB"s of capacity complete all as specified and directed. 61 Taking down services connection including disconnecting from pole DG/main switch complete all as specified and directed. 62 SCHEDULE "A" PART - XIII (ARBORICULTURE WORKS) 63 Supply and planting of following species of well grown (4 to 5 feet height)trees sampling with good roots including excavating a pit of size 2 feet x 2 feet x 2 feet in any type of soil & fill with the pit with Jaivik manure & suitable earth, including watering & spraying pestisides, fungisides etc. tying with aproximate 6 feet bamboo for supporting the plant wherever necessary & also replacing the dead plant/ sampling & its regular watering & maintanance till completion of two years maintanance period including spraying fungicides as and when required complete all as specified and directed. 64 Bottle Palm 65 Fish Tail Palm 66 Fox Tail Palm 67 Gulmohar 68 Bougainvillea 69 Ashoka Tree 70 Golden Shower 71 Jacaranda 72 Rain Tree 73 Heges ( 0.50 feet height) 74 Musanda 75 Agave 76 Crape mytale 77 Supply and planting of lawn carpet for landscaping including watering of carpet andwherever necessary & also replacing the dead plant/sampling & its regular watering & maintanance till completion of two years maintanance period including spraying fungicides as and when required complete all as specified and directed 78 Supply and installation for watering the following accessories:- 79 Pump & Pump Accessories 80 Filter 81 Valve 82 Pressure gauge 83 Air Valve 84 Fartigation Unit 85 Sprinkler 86 Unioun 87 Sadal 88 Pipe 2 inche including fittings 89 Pipe 1.5 inche & fittigs 90 Drip laternal tube 91 Micro connector 92 Wire and other control system 93 Pipe attachment and fittings 94 Cost of trannsportation & installation of Trees 95 Cost of installation and maintanace (2 years after completion) of drip irrigationand connected to main water supply etc complete all as specified and directed. 96 Preparation & levelling ofground for lawn carpert grass and plants complete all as specified and directed. 97 Maintanance of all plants, shrubs, lawn grass, etc for a period of 02years after certified comletion of subject work by employing skilled gardners any number as required on site per day to ensure healing up, keep of watering plants, pour manure, carying out periodic tilling and use pestisides, cutting grass and removing unwanted grass & plants at work site complete all as specified and directed.
|
