|
Tender For Special Repairs Building No P-583 In Gsfr Area Under Ge I Gos; 1 Taking down chowkhats or frames with shuttersnot exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified & directed. 2 Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to or from store complete all as specified and directed 3 Demolition ofbrick work built in cementmortar incl all arches, pillars etc but excluding ashlar facings dressed stone quoins work complete all as specified and directed 4 M&L for Brick work with sub-class `B" bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 Complete all as specified and as directed. 5 M & L for brick work with sub class "B" brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed. 6 M&L forcement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in coping, bed platesetc complete all as specified and as directed 7 Taking down cement plaster on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. 8 M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces finished even in CM (1:6) complete all as specified and as directed. 9 M&L for rendering 15mm thick in CM 1:4with 3 % water proofing compoundas per manufacturers instructions (note:Water proofing compound shall be measured and paid seprerately under respective item)on fair faces of brick workor concrete surfaceof walland to be finished even and smooth with out using extra cement complete all as specified and directed 10 Supply only water proofing compound ,complete all as specified and directed. 11 M&L for preparation of new plastered surfaces of walls or concrete and applying two coats of oil bound distemper over a coat of primer ,complete all as specified and directed. 12 M&L for Complete Removal of existing treatment including preparation of old treated surface and applying Two coat of oil bound distemper over over a coat of primerincluding preparation all as specified and directed. 13 M&L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper on walls all as specified and directed. 14 M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. 15 M&L for preparationof old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. 16 M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces/ old decorated wall surfaces, in case of old decorated wall surfaces includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed. 17 M&L for preparing old plastered surfaces of walls, Facias, cornices etc and apply one coat of weather proof exterior emultion (Make as approved by GE) Complete all as specified and directed. 18 M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) complete all as specified and as directed 19 M&L for Non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. 20 M&L for Non skid ceramic coloured tiles vertical surfaces area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm as skirting non skid ceramic tiles ncluding 10 mm thick renderingin CM 1:4 complete all as specified and directed. 21 M&Lfor glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick coloured on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. 22 M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces 23 S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 24 Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 , complete all as specified. 25 S&FPowder coatedthree track Aluminium sliding window with frame not less than 1.8 mm thick including4 mm thick tinted glass, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, aluminium snap beading & necessary rubber packing, locking, roller & opening arrangement, incl Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, all fitting and fixtures ,complete all as specified and directed. 26 S&F Powder coated Aluminium Ventilator with frame not less than 1.8 mm thick & including 4 mm thick tinted glass including beading & necessary rubber packing, locking & opening arrangement if required, all fitting and fixture complete all as specified and directed. 27 Dismantling boarding, of any description, fixed in any position with screws complete all as specified and directed. 28 S&F anodised aluminium snap grid frame work for false ceiling consists of grid size 605x605mm ,complete all as specified and directed. 29 Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified 30 M&L 4 mm thick non AC fibre cement building board classic type of size 605x605mm fixed or laid/inserted to aluminium framework ,complete all as specified and directed. 31 Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed. 32 M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection ,complete all as specified and directed. 33 M&L for 100 mm thick Cement concrete 1:4:8type D-2using 40 mm graded stone aggregate as in sub base complete all as specified and directed. 34 M&L hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone complete all as specified and directed. 35 M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors and pointed with grey pigment cement and pigments complete all as specified and directed. 36 M&L forscreed bed or bedding layer of mortar 15 mm thick in CM 1:4for laying floor finishes complete all as specified and directed. 37 M&L Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm longfasteners. Hardware: casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) 38 M&L Post Construction Anti termite Treatmentalong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron ,complete all as specified and directed. 39 M&L Post Construction Anti termite Treatment Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. ,complete all as specified and directed. 40 Taking down existing water proofing treatment/membrane of any type and Cleaning the surface of roof, palstered surfaces etc by roughening, picking, sweeping clean and washing down with water to remove all loose dirt etc and preparing the surface to receive plaster and brushing neat cement slurry @ 3.00 Kg of cement per Sqm ,complete all as specified and directed. 41 M&L for rendering 15 mm thick surface as in roof with integral water proofing compound @ 3% by the weight of cement in CM 1:4 complete all as specified & directed. (Integral WPC will be measured and paid separately). 42 M&L Water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment,properly cleaning & drying the concrete surfaces complete (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm(ii)Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces complete all as specified and directed. (iii) Laying evenly over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction complete all as specified and directed.(iv) Applying two coats of bituminous aluminium paintincluding preparation complete all as specified and directed. 43 Supply only Integral Water proofing compound ,complete all as specified and directed. 44 Taking down of eaves gutters and rain water pipes of any size or pattern including all fittings and cleaning or refixing or removal to store complete all as specified and directed. 45 M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints,fixed to walls or in floors of 110 mm bore of pipe etc ,complete all as specified and directed. 46 S&F PVC (SWR) bends any radius of 110 mm borewith outaccess door complete all as specified and directed. 47 Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power)complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removingmaterials to store forkeeping in safe custody or for taking credit (credit for above items should be made for conditions separately )and including making good the disturbed surfaces to match with existing surface and colour shade with proper puttyfor smooth finishing without andulations complete all as specified and directed.( Note:-All credit materials should be deposited in MES yard as available on work site the same materials should be issued to contractorthrough gate passas per contractschedule of credit materials againstcontract agreement or taken on ledger). 48 Material and labour for cutting chasing,pinning inbrick/ stone/concrete wallat any height wall cutting and chases for concealedwiring PVC pipe layingof20/25 mmdia pipes,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landings,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed 49 M&L for point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed,multistranded,single core, coppercable 1100 volts grade cables and colour coading,drawn throughPVCConduit 20/25 mm dia medium grade(MMS) at any height and all accessoriesare concealedinwalls / roofs / floors / ceiling etc. including providing necessary junction boxes,MS modular flush boxes & suitable for modular top cover and framefor fixing of modular switches,sockets,fan regulators, blank plate etc andincluding 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core copper cable with colour codingas earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directedfor One light point controlled by one 10amps switch, one way 50 All as per item no. 49 but forOnefan point controlled by one switch 10 amps, and oneregulator. 51 All as per item no. 49 but forOneexhaust fan point controlled by one switch 10 amps,one way 52 All as per item no. 49 but for One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board . 53 All as per item no. 49 but forOne 5 pin 10 amps socket point controlled by one 10 amps switch on same board . 54 All as per item no. 49 but forOne light point controlled by two 2 way switches. 55 All as per item no. 49 but forpoint wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed forOne 6 pin 16/20amps socket outlet point controlled by one 16/20 amps switchon independent board. 56 All as per item no. 55 but for One 6 pin 16/20 amps socket outlet point controlled by one 16/20 amps switch on same board. 57 All as per item No.55 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed. 58 Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, withISI Markedcomplete all as specified and directed. 59 Supply & fixing modular type switch 10 Amps ,2way,single pole,1 module,240V,AC,with ISI Markedcomplete all as specified and directed. 60 Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240V,withISI Marked complete all as specified and directed. 61 Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,ACISI Marked complete all as specified and directed. 62 Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,ACISI Markedcomplete all as specified and directed . 63 Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 1 to 8 steps,ISI Markedcomplete all as specified and directed. 64 Supply & fixing and fixing in repairs red color lighting indication lamp 6 Amps, single pole,240volts,AC,50 Hz suitable for 1 moduleISI Marked complete all as specified and directed. 65 Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbscomplete all asspecified and directed. 66 Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed. 67 Supply & fixdecorative box type 2x22 watt light fitting streak batten, end caps, pre-wired and including providing single/double sideLED tube light (tube rod) white/warm 20 watt-02 Nomade of aluminium extrusion with high efficientLED driver,IP-20, Tube efficiency of 100lm/w, including PVC/Wooden round/square block -02 Nosand connected with LED fitting to ceiling roseand including removing old unserviceable fitting complete all as specified and directed. 68 Supply & fixdecorative box type 9/10 watt light fitting,end caps, pre-wiredproviding single side LED tube 9/10 watt-01 No (tube rod) and including PVC/Wooden round/square block -02 Nosand connected with LED fitting to ceiling roseand including removing old unserviceable fitting complete all as specified and directed. 69 Supply and fixed aesthetically designed LED flat panelsuitable for surface/Recess mounting which provides soft-light and glare free symmetrically illumination 2"x2" LED 40/42 Watt(600x600x70mm) light fitting and including providing internally prewired,LED driver,connector and also can besuspended with provided kit,nut,bolts and washers as per site requirement and including connecting up with ceiling rose to fittingand including removing old unserviceable item complete all as specified and directed. 70 Supply and fixing sleek surface rugged stylish metal surface mounted down lighter suitable for different open ceiling indoor applications of 15 watt LED with driver and all fixing arrangements such as suspended kit/surface mounting arrangements and incl removing old unserviceable fitting complete all as specified and directed. 71 Supply and fixing sleek surface rugged stylish metal surface mounted down lighter suitable for different open ceiling indoor applications of 18/20 watt LED with driver and all fixing arrangements such as suspended kit/surface mounting arrangements and incl removing old unserviceable fitting complete all as specified and directed. 72 Supply and fixing sleek surface rugged stylish metal surface mounted down lighter suitable for different open ceiling indoor applications of 24 watt LED with driver and all fixing arrangements such as suspended kit/surface mounting arrangements and incl removing old unserviceable fitting complete all as specified and directed. 73 Supply and fixing down lighter 40 W LED fitting completely environmental friendly,energy saving long life corrosion resistant,pressure die-cast aluminium housing and control gear compartment well glass luminaires with LED as lightsource with driver and all fixing arrangements such as suspended kit/surface mounting arrangements and incl removing old unserviceable fitting complete all as specified and directed. 74 Supply and fix LED secruity light fitting of capacity 60 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protectionwith 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. 75 S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired ofluminaires including LED light driver and connected with LED fitting to ceiling rose terminaland incl removing old unserviceable fitting complete all as specified and directed. 76 Supply and fixing new highbay 200 watt LED light complete fitting green perform G2highbay designed to deliver excellent efficiencyat 160 lm/w and right optics suited for various applications and including excellent beam and glare control this highbay this hoghbay offers an unmatched lighting experience,green perform prime G2 not only provides assured performance,it is also a stylish fit for any places/provide fixing facilities/fixing arrangements, down chain,nuts ,bolts and washers etc and including takig down old unsv light fitting complete all as specified and directed. 77 Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirementwith hot or coldbending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixedonwall surfaces and including providingsuitable fabricate galvanised flat ironclamps of 30X6 mm thick-02 Nossuitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed. 78 Supply & fixingand sheet metal enclosure, double door ,415 volts AC,VTPNDB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer,and MCB SPN/SP/TPNas outgoing and complete forIP43&54 DBs protection and includingremoving old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. 79 Supply & fixand sheet metal enclosurewith metal type AD/DD,415 volts AC,TPNDB,, flush mounting with 200amps copper busbar, 2 neutral/earth bar and MCCB incomer,FP,and MCB SP /TPas outgoing and complete forIP54 DBs protection and includingremoving old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed.. 80 Supply & fix and in repair sheet metal enclosure acrylic door 240 volts AC,SPNdistribution board 12 wayfor flush mounting with 100amps copper busbar,neutral bar,earth bar suitable for MCB incomer of rating upto 100Amps ,MCB SPN/DP,and MCB SP as outgoing and complete connecting cable linkswith top and bottom removable gland plates withIP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coatall as specified and as directed. 81 Supply & fixing andsheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoingforIP 43& IP54 DBs protection nd includingremoving old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. 82 Supply & fix andsheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4/6 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP,and MCB SP as outgoingforIP 43& IP54 DBs protection nd includingremoving old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. 83 Supply & fixMCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed. 84 Supply & fix and MCB SPN 32 to40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed. 85 Supply & fix and MCB SPN 63 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed. 86 Supply & fix and MCB TPN 63 Amps 10 KA,"C" series,AC,415Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed. 87 M & L for sub main wiring complete in repairs with 4 run of 10 sqmm single core copper conductor (ISI marked)cable1100 volts grade, ISI marked,FRLSH type,(conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi strandedcolour coded cables drawn through and including rigid PVC conduit in concealed ISI marked medium grade(MMS) with all connected accessories such asBend,Tee,Elbow,Short pieces etc concealed in wall/roofs/floorsand including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed.Note : - Four run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. 88 All as per item No.87 butfor 2 Run x 10 Sqmm complete all as specified ad directed.Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. 89 All as per item No.87 butfor 2 Run x 6 Sqmm complete all as specified ad directed.Note : - Two run of 4 sqmm single core copper conductor cable and one run of 6.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. 90 All as per item No.87 butfor 2 Run x 4 Sqmm complete all as specified ad directed.Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. 91 All as per item No.87 butfor 2 Run x 2.5 Sqmm complete all as specified ad directed.Note : - Two run of 2.5 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. 92 All as per item No.87 butfor 2 Run x 1.5 Sqmm complete all as specified ad directed.Note : - Two run of 2.5 sqmm single core copper conductor cable and one run of 1.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. 93 Supply and fixMCCB,100 Amps,4 pole,415 Volts , 16KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washersand including removing old unserviceable itemcomplete all as specified and as directed. 94 Taking down old unsv ceiling fan from existing location and supply and fixnew ceiling fan with blades, down rods, and connected accessories, 230 V, 1200 mm sweep, with squirrel cage induction motor, anti dust painted, dust free,high speed. Star ratedcomplete all as specified and directed. 95 Supply and fix air circulator heavy duty turbo force wall mounted,metal body type fan 230Volts single phase oscillating 450 mm sweep and all connected accessories and including providing hanging heavy duty GI plate/clamp, nuts, bolts and washers complete all as specified and directed. 96 Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard Supply and fix new exhaust fan, steelbody turbo force type AC single phase.230Volts of size 300 mm sweep with bladesand including providing insect protection net frame/ louvers and frame complete all as specified and directedcomplete all as specified and directed. 97 Material and labour for XLPE insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 35 sqmm ,3.5 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testingand including removing old unsv UG cables complete all as specified and directed. 98 Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed. 99 Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed. 100 Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all asspecified and directed. 101 Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed 102 Removing excavated soil not exc50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed 103 M & L for brick sub class "B" 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cablecomplete all as specified and directed. 104 Material & labour for GI pipe 80 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings such as bends etc complete all as specified and directed. 105 Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres belowground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipeof 15 mm diafrom earth electrode up to test point or up to 7.5mtr whichever is less by means of GIbolts, nuts, check nuts and washersall as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required valueincluding removing old item completeall as specified and directed. 106 Material & labour for GI pipe 15 mm "light grade"for ceiling fan hanging including providig necessary drilling,hole,nuts,bolts and washerswith all fittings such as bends etc complete all as specified and directed. 107 Material & labour for GI pipe 40 mm "light grade"for ceiling fan hanging including providig necessary drilling,hole,nuts,bolts and washerswith all fittings such as bends etc complete all as specified and directed.
|
