Request For Quotation Purchasing Equipment For The Laboratory in Kazakhstan

Work Detail

Power Supply (Servo Tester) - Servo Tester Hj 1-4 1. 2 Pcs. 2. Supply Voltage Dc 4.8–6 V. 3. Output Signal Pulse Width 800–2200 Μs. 4. Operating Modes S-1 - Manual Mode, S-2 - Neutral Position, S-3 - Automatic Mode. -Connection Cables 1. 2Pcs. -User Manual 1. 2Pcs., Soldering Iron, 60 W -Station 1. 30 Pcs. 2. Safety, The Unique Inactive State Function Allows You To Save Energy. When The Hair Dryer Is Placed On The Holder, The System Is Put Into A Standby State Of Readiness, The Hair Dryer Is Cooled. As Soon As The Hair Dryer Is Removed From The Holder, The System Returns To The Set Settings. 3. 3-Digit Led Display. 4. Maximum Power Consumption Of At Least 700W. -Power Cable 1. 30 Pcs. - Air Dryer (Thermal Hair Dryer) 1. 30 Pcs. 2. Air Dryer Type, Circular Impeller 3. Air Flow Not Less Than 120 L/Min Maximum 4. Temperature Range Of The Hair Dryer 100 °C - 450 °C 5. Temperature Stability Of The Blown Air 1 °C. Hair Dryer Handle Length 120 Mm. -Holder/Stand For Hair Dryer 1. 30 Pcs. -Hair Dryer Attachments 1. 30 Pcs. -Soldering Iron (Handle With Tip) 1. 30 Pcs. 2. Soldering Iron Maximum Power 60W. 3. Temperature Range Of The Soldering Iron Is 200 °C - 480 °C. 4. Heating Temperature Time Is No More Than 5 Seconds. -Soldering Iron Stand With A Sponge For Cleaning The Tip 1. 30 Pcs. -Wire Ball Mesh (Ball Wire) For Cleaning The Soldering Iron 1. 30 Pcs. - Soldering Iron Tips 1. 30 Pcs. -Antistatic Tweezers 1. 30 Pcs. -Solder (Tin) 1. 30 Pcs. -Desoldering Pump (Solder Extractor) 1. 30 Pcs. -Spare Heating Element For Soldering Iron 1. 30 Pcs. -Spare Heating Element For Hair Dryer 1. 30 Pcs., Shadowless Lamp - Lamp With Led Panel 1.2 Pcs. 2. Power Of At Least 24W. 3. Material Metal, Plastic, Abs Plastic. 4. Mechanical Switch Type. 5. Brightness Adjustment Available. 6. Brightness Up To 2000 Lumens. -Spring Hinge Bracket 1. 3Pcs. -Desk Clamp 1. 3Pcs. -Power Cord With Switch 1. 3Pcs. -Operating Instructions 1. 3Pcs., Set Of Electric Screwdrivers - Cordless Screwdriver 1. 2 Pcs. 2. Battery Voltage Is At Least 4V. 3. Battery Capacity Is At Least 2Ah. 4. Maximum Torque Not Less Than 5Nm. 5. Soft Torque Of At Least 2.5Nm. 6. Idle Speed Of At Least 300 Rpm. 7. Charging Time Is At Least 85 Minutes. 8. There Is A Reverse. 9. Motor Type Is Brushed. -Set Of Bits 1. 2 Pcs. -Bit Holder / Extension 1. 2 Pcs. -Case / Package 1. 2 Pcs. -Magnetic Adapter For Bits 1. 2Pcs. -Hook/Extension For Hard-To-Reach Places 1. 2 Pcs. - Charger With Adapter 1. 2 Pcs. -Operating Instructions 1. 2Pcs. - Cordless Screwdriver 1. 2 Pcs. 2. Battery Voltage Is At Least 3.7V. 3. Battery Capacity Is At Least 1500 Mah. 4. Maximum Torque Not Less Than 3Nm. 5. Soft Torque Of At Least 2.5Nm. 6. Idle Speed Of At Least 300 Rpm. 7. Charging Time Is At Least 3 Hours. 8. There Is A Reverse. 9. Motor Type Is Brushed. -Set Of Bits 1. 2 Pcs. -Bit Holder / Extension 1. 2 Pcs. -Case / Package 1. 2 Pcs. -Magnetic Adapter For Bits 1. 2Pcs. - Charger With Adapter 1. 2 Pcs. -Operating Instructions 1. 2Pcs., Led Headlamp. -Headlamp 1. 2 Pcs. 2. Brightness Of At Least 1000 Lumens. 3. Brightness (Medium Mode) At Least 300-500 Lumens. 4. Long Beam Up To 150-200 Meters. 5. Composition Of Cree Xp L / Xm L / Similar Premium Leds. 6. Power Type Li-Ion Battery Or Replaceable Aaa Batteries × 3. 7. Operating Time At Least At Maximum ~2-3 Hours, In Economy Mode ~10-20 Hours. 8. Lighting Modes Minimum: High / Medium / Low / Strobe / Sos / Red Light. 9. Usb-C Charging. 10. Protection Degree Ipx6-Ipx8. 11. Shock Resistance Can Withstand Falls From A Height Of ~1-2 Meters. -Adjustable Forehead Strap 1. 2Pcs. - Fastenings 1. 2Kt. -Batteries 1. 2Kt. -Charging Cable 1. 2Pcs. -Additional Fasteners 1. 2 Pcs. -Operating Instructions 1. 2Pcs., -Soldering Station 1. 1Pc. 2. Power Of At Least 160 W. 3. Supply Voltage Not Less Than Ac 100-240 V, 50-60 Hz. 4. Temperature Range Of At Least 100-450°C, Adjustable In 1°C Steps. 5. Compatible Handles/Attachments C115 (Included), C210, C245. 6. Potential Between Tip And Ground <2 Mv. 7. Digital Temperature Control Using Buttons. 8. Temperature Display Led Display Shows The Set And Current Temperature. 9. Number Of Programmable Channels Of The Settings Memory Channel. 10. Resistance Between Tip And Ground <2 Ohm. -Control Unit 1. 1Pc. - Soldering Pen/Flask 1. 1 Pc. -Replaceable Tips 1. 3 Pcs. -Sponge Or Mesh For Cleaning The Tip 1. 1 Pc. -Copper Tip Cleaner (Copper Web) 1. 1Pc. -Power Cord 1. 1Pc. - Cabinet 1. 1 Pc. - Stand Holder For Soldering Pen 1. 1Pc. -Monitor 1. 1Pc. -Metal Wire/Cable Holder 1. 1Pc. -Packaging For Transportation 1. 1Pc. -User Manual 1. 1Pc., -Glue Gun (For 11Mm Rods) 1. 1Pc. 2. Supply Voltage 220V. 3. Power Not Less Than 100W. 4. Heating Time Is No More Than 5 Minutes. 5. Maximum Operating Temperature Is Not Less Than 140°C. 6. There Is An Anti-Drip System. -Glue Gun (For 7Mm Rods) 1. 1Pc. 2. Supply Voltage 220V. 3. Power Not Less Than 100W. 4. Heating Time Is No More Than 5 Minutes. 5. Maximum Operating Temperature Is Not Less Than 140°C. 6. There Is An Anti-Drip System. -Glue Sticks 1. 14 Pcs. 2. Diameters 7 Mm And 11 Mm. -Case 1. 1Pc. 2. The Weight Of The Set Is No More Than 1 Kg. -User Manual 1. 1Pc. - Stand Brackets 1. 2 Pcs., Laboratory - Power Supply 1. 2 Pcs. 2. Pulse Type. 3. The Number Of Channels Is One. 4. Output Power Not Less Than 180 W. 5. Voltage Not Less Than 35V. 6. Current Not Less Than 6A. 7. Weight Is Not 2 Kg. -Connection Cables 1. 2Pcs. -User Manual 1. 2Pcs. -Cables With “Crocodiles” 1. 2Kt.

Contact Information