|
Tender For Repairs To Auditorium Chair And Tp Furniture Items Under Ge (Nw) Karanja; 1 SOFA SET 5 SEATER FULLY UPHOLSTERED , (3+1+1) TP 2 Removing of old unserviceable rexin/Tapestry clothof sofa set 5 seater (1 x piece, size of 3 seater approx width 1800 mm, depth 835 mm, height 730 mm and single seater (650 x 835 x 730 mm) and supply and fixingnew Synthetic rexin/composite rexine/leatherette of Best quality with plush foam seating and wherever required and as per existing pattern and approved by Engr-in-charge and cost of rexine/Tapestry shall not be less than Rs 650/- Per metre. (cost includes all other work like stitching and patches filling with good quality of racron filler and other required material solution/staple pins for required work ) Drg No TP. 3 Removing & supply and fixingnew 3 steel leg shall be made of all as specified as per existing pattern and directed by Engr-in-Charge. 4 Removing & supply and fixing of new black malmal /coraclothbelow sofa set all as per existing pattern and directed byEngr-in-Charge. 5 Cleaning of Sofa set by best and suitable use of chemical solution. 6 SOFA SET 4 SEATER FULLY UPHOLSTERED ( 2+2) TP 7 Removing of old unserviceable rexin clothof sofa set 4 seater (2 x pieces, size of 2 seater approx size - width 1320 mm, depth 835 mm, height 730 mm and supply and fixing with new Rexine cloth/tapestry of Synthetic rexin/composite rexine/leatherette of good quality with plush foam seating wherever required and all as per existing pattern and approved by Engr-in-charge and cost of rexine/Tapestry shall not be less than Rs 650/- Per metre.(cost includes all other work like stitching and patches filling with good quality of racron filler and other required material solution/staple pins for required work ) Drg No TP. 8 Removing & supply and fixingnew 3 steel leg shall be made of all as specified as per existing pattern and directed by Engr-in-Charge. 9 Removing & supply and fixing of new black malmal /coraclothbelow sofa set all as per existing pattern and directed by Engr-in-Charge. 10 CHAIREASY STEEL CUSHIONED, FD-121M 11 Removing the old unserviceable and Supply & Fixing of new 75 mm thick cushion for seatwith approved shade of Rexin from Engr-in-Charge. Make of Foam 40 density - Kurlon/Sleepwell/U-foam or equivalent as approved by GE. 12 Removing the old unserviceable and Supply & Fixing of new 75 mm thick cushion for backwith approved shade of Rexin from Engr-in-Charge. Make of Foam 40 density - Kurlon/Sleepwell/U-foam or equivalent as approved by GE. 13 Painting of entire chair with two coats of synthetic enamel paint. 14 Repairs to Chair Computer with arms/Revolving or Computer Chair Adjustable with gas lift,TP 15 Replacement of old unserviceable castors wheel, Supply and Fixing new castor wheel of different types as per Existing pattern & requirement as approved by Engr-in-charge. 16 Fixing/tightening/welding and greasing of Chair Computer wherever required and painting with synthetic enamel paint of required shade. 17 Removing of old tapestry cloth & Cora black cloth and Supply & Fixing new tapestry cloth/rexine and Cora Black cloth(Tapestry and cora cloth of approved quality and shade) alongwith seat and back of Chair Computer. Unit rates include PVC lipping around & new plastic cover (Panni) against dust/dirt to seat and back after change tapestry work (Note: The rate of tapestry cloth/rexine shall not be less than Rs 300per metre and will be approved by Engr-in-Charge.) 18 Removing of oldunserviceable handle and Supply & Fixing new Handle of Black integral skin polyurethane Re-inforced with MS Insert. It shall be scratch and weather Resistant handle as per existing pattern or as directed by Engineer-in-Charge. 19 Removing of old unserviceable Hydraulic /Gas Pump Mechanism & supply and fixing new one with PVC Cup around fixing between prong and MS tilting frame. It shall consist of drop and provide lift mechanism and shall be adjusted in the range of 65 mm and can be locked in 5 steps for better lumbar support. 20 Removing of complete old unserviceable MS Tilting Frame/Mechanism for combination lever to adjust chair height and lock rocking, fitted to seat and back & supply and fixing new one as per existing pattern or as directed by Enr-in-charge. 21 Removing of old unserviceable and Suuply & Fixing newNylon A 10.5 mm dia forged bright zinc plated MS Castor pin/Chrome base heavy duty is a press fitted into each prong for holding the castors. It should be minimum 600 mm pitch centre dia. 22 AUDITORIUM CHAIR, TP, MODEL-VTO 300 23 Removing of old unserviceable Tapestry cloth from the Auditorium chair and supply and fixing of new cloth not less than Rs 320 /- per metre. white long cloth shall be provided for the cushion before fixing new tapestry cloth. Tapestry cloth shade/colour shall be as approved by GE. 24 Painting to existing MS portion of chair with two coats of synthetic enamel paint over a coat of red oxide/zinc chrome primer including removal of existing old paint. MELAMINE Polishing of exposed wooden surface. 25 Servicing of Auditorium chair including tightening of chair, oiling to spring and other moving parts of chair. 26 Cleaning of Auditorium chair by best and suitable chemical solution. 27 Removing old, Supply & Fixing of new Tip up spring and slider unit mechanism complete as per existing pattern and as directed by Engr-in-Charge. 28 Bench with cushion Seat and Back (1070x300x 900mm ), TP 29 Removing the old unserviceable and Supply & Fixing of new 75 mm thick cushion for seatwith approved shade of Rexin from Engr-in-Charge. Make of Foam 40 density - Kurlon/Sleepwell/U-foam or equivalent as approved by GE. 30 Removing the old unserviceable and Supply & Fixing of new 75 mm thick cushion for backwith approved shade of Rexin from Engr-in-Charge. Make of Foam 40 density - Kurlon/Sleepwell/U-foam or equivalent as approved by GE. 31 Painting of entire chair with two coats of synthetic enamel paint 32 REPAIR TO CHAIR EXECUTIVE HIGH BACK/REVOLVING, TP 33 Replacement of old unserviceable PU Chrome heavy duty castors wheel, Supply and Fixing newcastor wheel of different types as per Existing pattern & requirement as approved by Engr-in-charge. 34 Fixing/tightening/welding and greasing of Chair wherever required and painting with synthetic enamel paint of required shade. 35 Removing of old tapestry cloth & Cora black cloth and Supply & Fix new tapestry cloth/rexine and Cora Black cloth (Tapestry and cora cloth of approved quality and shade) alongwith seat and back of chair. Unit rates include PVC lipping around & new plastic cover(Panni) against dust/dirt to seat and back after change tapestry work (Note: The rate of tapestry cloth/rexine shall not be less than Rs 350 per metre and will be approved by Engr-in-Charge.) 36 Removing of oldunserviceable handle and Supply & Fix new arm rest. It shall be scratch and weather Resistant handle as per existing patter or as directed by Engineer in Charge. 37 Removing of old unserviceable Hydraulic /Gas Pump Mechanism & supply and fixing new one with PVC Cup around fixing between prong and MS tilting frame. It shall consist of drop and provide lift mechanism and shall be adjusted in the range of 65 mm and can be locked in 5 steps for better lumbar support. 38 Removing of complete old unserviceable MS Tilting Frame/Mechanism for combination lever to adjust chair height and lock rocking, fitted to seat and back & supply and fixing new one as per existing pattern or as directed by Engr-in-charge. 39 Removing of old unserviceable and Supply & Fix new heavy duty Chrome base with Castor pin is a press fitted into each prong for holding the castors. It should be minimum 600 mm pitch centre dia. 40 CHAIR FOR VISITOR, TP 41 Replacement of old unserviceable armswith new black integral skin polyurethane with 75-85 shore A hardness and reinforced with MS Insert,both hand rest sections to have slope towards front as per trades pattern, as per existing pattern or as directed by Engineer in Charge. 42 Removing the old unserviceableMS Pata Frame fitted between seat & back and Supply and Fixing the new one, all as per existing pattern or as directed by Engr-in-charge. 43 Removing the old unserviceable seat and back and Supply and Fixing the new seat and back with panni for dust protection , polyurethane foam shall be moulded with density 50 -55 kg per cubic meter thick and hardness 20 +/-2 kg on hampden machine and moulded polyurethane foam with PVC lipping all around as per drawing, as per existing pattern or as directed by Engineer in Charge. 44 CHARPOY GI PIPE W/PLY TOP, FD 220 45 Removing of old unserviceable Clit/MS Square tube & Supply and fixingMS flat of 35 mm in width x 5mm in Thickness along the width of charpoy in 2 Nos duly welded with frame as support to plywood with hole and fixed with required size nuts & bolts, max 2 Nos per one charpoy all as specified as per existing pattern and directed by Engr-in-Charge. 46 Removing of unserviceable plywood and Supply and fixing new 12 mm ply BWR Grade 1 commercial IS 303 to charpoy GI pipe by means required size of nuts and bolts/screws, plywood size all as shown on drawing FD-220. Make- Kitply (Vista)/ century(Club)Anchor/Archid (Gold) or equivalent as approved by GE. 47 CHAIR FOR CONFERENCE REVOLVING , TP 48 Replacement of old unserviceable castors wheel, Supply and Fixing newPU chrome heavy dutycastor wheel of different types as per Existing pattern & requirement as approved by Engr-in-charge. 49 Fixing/tightening/welding and greasing of Chair wherever required and painting with synthetic enamel paint of required shade. 50 Removing of old tapestry cloth/Rexin & Cora black cloth and Supply & Fixing new tapestry cloth/rexine and Cora Black cloth (Tapestry and cora cloth of approved quality and shade) alongwith seat and back of chair. Unit rates include PVC lipping around & new plastic cover (Panni) against dust/dirt to seat and back after change tapestry work. (Note: The rate of tapestry cloth/rexine shall not be less than Rs 420 per metre and will be approved by Engr-in-Charge.) 51 Removing of oldunserviceable handle or padded arm and Supply & Fixing newHandle/ padded arm rest of Black integral skin polyurethane Re-inforced with MS Insert. It shall be scratch and weather Resistant handle as per existing pattern or as directed by Engineer in Charge. 52 Removing of old unserviceable Hydraulic /Gas Pump Mechanism & supply and fixing new one with PVC Cup around fixing between prong and MS tilting frame. It shall consist of drop and provide lift mechanism and shall be adjusted in the range of 65 mm and can be locked in 5 steps for better lumbar support. 53 Removing of complete old unserviceable MS Tilting Frame/Mechanism for combination lever to adjust chair height and lock rocking, fitted to seat and back & supply and fixing new one as per existing pattern or as directed by Engr-in-charge. 54 Removing of old unserviceable wheel base and Supply & Fixing new chrome base with MS Castor pin is a press fitted into each prong for holding the castors. It shall be minimum 600 mm pitch centre dia. 55 Stoolwooden top 30 cm dia with cushion cotton paddling 20 high, TP 56 Removing the old unserviceable top and Supply & Fixing new Top with rexin cover made out of 30 cm dia in round shape, cushion 75 mm thick , 40 Density as per existing pattern and directed by Engr-in-Charge. 57 Polishing to stool with French polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surfacewith sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out anti-termite and anti-bug treatment. 58 Table Writing Steel (1200 x 800 x 750 ) 59 Removing old unserviceable and Supply & Fixing new Top of size 1200 mm x 800 mm made out of 18mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood 60 Painting to Table with approved grade and brand after cleaning, dusting and scratching the entire steel surfacewith sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. 61 TABLE OFFICE WRITING TUBULAR FORMICA TOP (1370x760x760 mm ), TP 62 Removing old unserviceable and Supply & Fixing new Top of size 1370 mm x 760 mm made out of 18 mm thick prelaminated particle board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood. 63 Painting to Table with approved grade and brand after cleaning, dusting and scratching the entire steel surfacewith sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. 64 ALMIRAH STEEL LARGE WITH SHELVES DNC-505 (TP) 1980x500x600 mm 65 Material and Labour for derusting, denting of de-shaped portion and applying two coats of synthetic enamel paint (Spray painting) including preparation of surface all as directed by Engr-in-Charge. The Work will be executed at various Units locations/Residential accommodation area as per user requirement. Make for paint- Asian/Shalimar/Burger/Dulux or Equivalent as approved by GE. 66 Removing of old unserviceable MS clamps/ Bracket and supply &fixing of new MS clamps/ Bracket with nut bolts or welding as per given in drawing and site requirement complete all as specified on Drawing and directed by Engr-in-Charge. 67 Removing of old unserviceablelockand supply & fixing of new 6 leverlockwith duplicate keys, by nut bolts or welding as per given in drawing and site requirement complete all as specified and directed by Engr-in-Charge. Make: link /Godrej/Standard/Aligarh or Equivalent as approved by GE. 68 Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed by Engr-in-Charge.
|
