|
Bill Of Quantities For Special Maintenance And Repair Of B-672, 674 Electricity Distribution Division- Iind Kamla Nagar, Agra- 1 Excavation In Foundation In Ordinary Soil ( Loam Clay Or Sand ) Including Lift Upto 1.5M And Lead Upto 30M And Including Filling, Watering And Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building And Sides Of The Foundation Work. ( Csi No. 4.01 ) 2 Concrete With 4Cm Gaugestone Ballast, Coarse Sand ( F.M. 1.8 To 2.5 ) & Cement In Proportion Of 12:6:1 In Foundations &Under Floors Including Supply Of All Materials, Labour And Tools And Plants Etc. Required For Proper Completion. ( Csi No. 5.02 ) 3 Cement Concrete With 2Cm Gauge Approved Hard Stone Ballast, Coarse Sand ( F.M. 1.8 To 2.5 ) And Cement In Proportion Of 4:2:1Including Supply Of All Materials, Labour, Side Shuttering Ifrequired And T&P Etc. Required For Proper Completion Of Work. ( Csi No. 5.06 ) 4 Precast Cement Concrete Door Sills, Chaukhats Boundary Posts, Shelves And Similar Small Work With Cement, Approved Coarse Sand ( F.M. 1.8 To 2.5 ) And 2 Cm Gauge Graded Approved Hard Stone Ballast In The Proportion 1:1.5:3, Excluding Reinforcement But Including Fixig The Same In Position Including Cost Of All Other Material, Labor And T&P . ( Csi No. 5.22 ) 5 Rcc Work With Cement, Approved Coarse Sand ( F.M. 1.8 To 2.5 ) And2 Cm Gauge Graded Approved Hard Stone Ballast Like Granite, Quartzite Etc From Dalla, Jhansi Or Other Quarries In Proportion 1:1.5:3In Lintels Of Doors And Windows, Excluding Supply Of Reinforcement & Its Bending But Including Its Fixing And Binding The Same With Binding Wire, Including Cost Of All Other Materials Labour And T&P. . ( Csi No.5.23 ) 6 First Class Brick Work In 1:6 Cement And Coarse Sand ( F.M.1.8 To 2.5 ) Mortar In Foundation And Plinth Including Supply Of Allmaterials, Labour & T&P Etc. Required For Proper Completion Of Work. ( Csi No. 6.01 ) 7 As In Item 6 Above But For Walls Of One Brick Thickness.Add For Extra Labour To The Rates Of Item No.6.07. ( Csi No.6.01+ 6.08 ) 8 2.5 Cm. Thick Damp Proof Course Of Cement Concrete Consisting Of 1 Part Cement 1.5 Parts Approved Coarse Sand ( F.M.1.8 To 2.5 ) , And3 Parts Approved 12 Mm. Graded Stone Grit And Also Including Liquidwater Proofing Material As Approved By The Engineer-Incharge In The Proportions Specified By The Manufacturer. ( Csi No. 7.02 ) 9 Supply And Fixing Of 32 Mm Thick Single Leaf Flush Door Shutter ( Boiled Water Resistance, Phenol Maldehide Resin Bonded, Hot Pressed Factory Made ) Commercial Quality To I.S.2202 Part-1 ( 1983 ) Isi Marked Including Fixing Of Wooden Cleats And Stoppers And Including Fixing And Adjustment Of Hinges, Bolts.Locks, Handles, Springs And Other Fittings But Excluding Their Supply Including All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. ( Csi No. 8.57 ) 10 Mild Steel Or Iron Work In Heavy Sizes Such As Trusses Built Upgates, Door Frames, Record, Racks Roof Work Gates Etc. Wrought Torequired Form Including Holes Rivetting Or Welding Where Necessary And Also Fixing In Proper Position And Alignment Including Cost Of All Materials Supplied By Contractor. ( Csi No. 9.01 ) 11 Mild Steel Or Iron In Plain / Torwork In Plain Work Such As R.C.C. Or R.B. Work ( When Not Included In Over All Rates ) Wrought To Required Shape As Necessary Includingbending As Per Requirement And Direction Of E / Ifor Proper Completion Of The Work And Including Supply Of Steel, Its Wastage, Bend, Hook And Authorised Overlapping In Reinforcement Shall Be Measured. ( Steel Shall Be Arranged By The Contractor ) ( Csi. No. 9.03 ) 12 Providing And Fixing Steel Glazed Window And Ventilators Ofstandard Rolled Mann Or Mahavir Steel Sections Conforming To Is7452-1974 As Per Drawing Joints Metered & Welded With 100X14x3.15 Mm Holdfast Embedded In Cement Concrete Block 15X10x10 Cm. Size Of 1:3:6 Proportion I.E. 1 Part Of Cement 3 Part Of Approved Coarse Sand & 6 Part Of Graded Stone ( Aggregated 20Mm. Nominal Size ) S / F Of Glass Panes Of Plain Pin Headed 4Mm. Thick Nuts Glazing Clips And Special Putty Of Approved Make Complete And Including A Cost Of Red Oxide Paint. The Fabrication Should Conform To I.S.1038-1975. ( Aluminum Beading With Rubber Packing Included ) . ( Csi No. 9.17 ) 13 Supply And Fixing Galvanised Mosquito Proof Jali ( 16X24 Gauge ) Withm.S. Flat Of 20 X 3 Mm. Size, On Both Sides Screwed Or Welded To Windowor Door Frame. ( Csi No. 9.18 ) 14 12 Mm Thick Plaster With Cement Mortar Consisting Of One Part Of Cement & Four Part Of Coarse Sand ( 1:4 ) , Minimum Thickness Not To Be Less Then 10 Mm Including Supply Of All Material, Labour And T&P Etc For Proper Completion Of Work. ( Csi No. 11.07 ) 15 12 Mm Thick Plaster With Cement Mortar Consisting Of One Part Of Cement & Six Part Of Coarse Sand ( 1:6 ) , Minimum Thickness Not To Be Less Then 10 Mm Including Supply Of All Material, Labour And T&P Etc For Proper Completion Of Work. ( Csi No. 11.09 ) 16 Add For Extra Labour And Materials For Plaster Over Rough Face Ofone Brick Thick Wall. ( Csi No. 11.12 ) 17 2 Cm. Thick Cement Plaster In Dado Or Skirting In 1:2 Consisting Of Onepart Of Cement And Two Parts Of Approved Coarse Sand Laid Inpanels Finished With 3Mm.Floating Coat Of Neat Cement Or Cementand Marble Dust In Ratio Of 5:1 Including Supply Of All Materials, Labour & T&P Etc. Required For Proper Completion Of The Work. ( Csi No.11.13 ) 18 S / Mixing Approved Water Proofing Compound ( Cico, Dr Fixit Etc ) In Cementmortar In Plaster Or Concrete Work In The Proportion As Recommended By The Manufacturer. ( Csi No. 11.15 ) 19 Providing ( 12X15 ) Mm Section Groove In Plasterincluding All Material, Labour Andt&P Etc. Required For Proper Completion Of The Work. ( Csi No. 11.16 ) 20 Making Drip Coarse ( 25X12 ) Mm In 1:2 Cement And Coarse Sandincluding Supply Of All Materials, Labour And T&P Etc Requiredfor Proper Completion Of Work. ( Csi No. 11.19 ) 21 4.0 Cm Thick 1:2:4 Plain Cement Concrete Floor With Cement, Approved Coarse Sand & 2Cm Graded Approved Stone Ballast Laid In Panels Finished With 3Mm Floating Coat Of Neat Cement Or Cement And Marble Dust In Ratio Of 5:1 As Specified And Removing Any Overlapping Mortar At The Joints Of The Panels If Any And Giving Them A Uniform Finish Including Supply Of All Materials, Labour And T&P Etc, Required For Proper Completion Of The Work. Without Base Cc ( Csi No. 12.04 ) 22 Supply And Laying 8 Mm Thickglazed Floor Tiles Of Somany, Johnson Or Equivalent Make, , Laid With1:3 Cement And Approved Coarse Sand Mortar Finished With Whitecement Slurry, Jointing And Polishing Complete, Including Supplyof All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 12.11 ) 23 Providing And Fixing Glass Strips Of 3.15 Mm Thickness & 40Mm Depth In Jointsof Floor And Skirting At The Time Of Laying Floors, Flush Withfloor Level Including Supply Of All Materials, Labour& T&P Etc. Required For Proper Completion Of Work. ( Csi No. 12.14 ) 24 Painting Or Varnishing New Iron Work In Small Areas Or New Woodwork With One Coat Of Ready Mixed Priming Paint And One Coat Ofapproved Superior Quality Ready Mix Paint Luxol Or Equivalentbrand Or Varnish Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. Paint To Be Used Should Conform To The I.S. 103-1950. ( Csi No. 13.01 ) 25 As In Item 24 Above But Every Coat After The First Coat. ( Csi No. 13.02 ) 26 As In Item 24 Above But For Every Coat On Previously Paintedold Wood Or Iron Work Including Its Sand Papering, Rubbing Andcleaning As Required, For Proper Completion Of Work. ( Csi No. 13.03 ) 27 Removing Paint Or Varnish With Paint Remover Or With Caustic Soda Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 13.07 ) 28 One Priming Coat And One Coat Oil Bound Distemper On New Work Includingsupply Of All Materials, Labour And T&P Etc. Required For Propercompletion Of The Work. ( Csi No. 13.08 ) 29 As In Item 28 But For Every Coat After The First Coat. ( Csi No. 13.09 ) 30 As In Item 28 But For Every Coat On Previously Old Oil Bound Distemper Surface. ( Csi No. 13.10 ) 31 Applying Birla Or Equivalent Putty On New Interior Or Exterior Surface Over One Coat Of Water Based Cement Primer Of Ici Or Equivalent Brand For Smoothening And Levelling Of The Surface As Per Requirement And Direction Of Engineer I / C Including Cost Of All Material, Labour, T & P Etc Required For Proper Completion Of Work. ( Csi No. 13.20 ) 32 Applying Birla Putty Or Equivalent Putty On Previousaly Bila Putty Smoothen Surface Over One Cost Of Water Base Cement Primer Of Ici Or Equivalent Brand For Smoothining And Leveling Of The Surface As Per Requirement And Direction Of E / I Including Cost Of All Material , Labour And T&P Required For Proper Completion Of Work. ( Csi No.13.21 ) 33 Finishing Walls With Water Proof Exterior Emulsion Paint Oface ( Asian ) Or Equivalent Brand On Already Well Prepared New Wall Surfaces With One Coat Of Primer ( Ici ) Followed By Two Coats Of Ace Exterior Empulsion Paint To Give An Even Shade Including Thorough Washing With Water Including As Per Direction Of E / I Direction Of Including Cost Of All Materials, Labour, T&P Etc Requried For Proper Completion Of The Work ( Nsi ) 34 Finishing Walls With Water Proof Exterior Emulsion Paint Oface ( Asian ) Or Equivalent Brand On Old Surfaces To Give An Even Shade Including Thorough Washing With Water Including As Per Direction Of E / I Direction Of Including Cost Of All Materials, Labour, T&P Etc Requried For Proper Completion Of The Work ( Nsi ) 35 Dismantling Brick Work Or Stone Work In Lime Or Cement Mortar Andincluding Stacking Of Materials As Directed By Theengineer-In-Charge Within A Distance Of 60 Metres. ( Csi No. 15.01 ) 36 Dismantling Reinforced Cement Concrete Or Reinforced Brick Work, Including Stacking Of Dismantled Materials As Directed By Theengineer-Incharge Within A Distance Of 60 Metres. ( Csi No. 15.03 ) 37 Dismantling Of Griders, Trusses And Other Steel Works Including Stcking Of Materials As Directed By Engg-In-Charge Within A Distance Of 60 Mtrs. ( Csi No. 15.08 ) 38 Dismantaling Doors And Windowschowkhatsincluding Stacking Of Materials As Directed By Engg-In-Charge Within A Distance Of 60 Meters. ( Csi No. 15.10 ) 39 Dismantling Existing Plaster Including Disposal Of Refuse Asdirected By The Engineer-I / C Within A Distance Of 60 M. ( Csi No. 15.11 ) 40 Dismantling Of Existing Damaged Mud Faska Over The Roof. Cleaning The Surface With Wire Brush, Removal And Disposal Of Rubbish At Adistace 100 Meters Also Including The Cost Of Cleaning And Stacking Of Usable Materials Etc., Including All Labour, Material Required For Proper Completion Of Work. ( Csi No. 15.14 ) 41 Renewing Panes Of 4 Mm Glass Including Supply Of Glass With Putty And Brads Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( B ) Same As Above Itembut 4 Mm Thick Panes. ( Csi No. 20.04I ) ( 806B ) 42 Disposal Of Rubbish / Debris Out Side The Uppcl Area As Per Direction Of Er / In- Charge Including Cartage, Labour And Materials, T&P Etc. Required For Proper Completion Of The Work. ( No. Deduction For Voids Shall Be Made ) . ( Csi No. 20.16 ) 43 Supply And Replacing Of Following Chromium Polished Iron Fittings Including Cost Of Nuts, Bolts Etc.Complete. ( A ) L Drops 16 Mm Dia X 300 Long. ( Csi No. 20.17A ) 44 ( C ) Tower Bolts 10 Mm Dia X 100 Mm Long. 45 ( D ) Iron Hinges 100 Mm Size.12 Gauge.Thick 46 ( E ) Iron Door Spring. 47 ( F ) M.S.Handles 100 Mm Size 48 S / Laying Chicken Mesh Of ( 20 Mm. ) Hexagonal Heavy Quality Over Roofs Of Joints Of Roof As Per Direction Of The Engineer - In - Charge. ( Csi No. 20.21 ) 49 Supply And Laying1.5Sq.Mm Gauge Copper Wire 2 No. Of Havells Orequivalent Make Of Approved Quality Including Connecting Withexisting Wiring In Existingp.V.C.Pipe. Including Allmaterials, Labour And T&P Complete. ( Csi No. 22.06A ) 50 Supply And Laying 2.5Sq.Mm Gauge Copper Wire2 No.Of Havells Orequivalent Make Of Approved Quality Including Connecting Withexisting Wiring In Existingp.V.C.Pipe. Including Allmaterials, Labour And T&P Complete. ( Csi No. 22.06B ) 51 Supply And Laying 4.0Sq.Mm Gauge Copper Wire 2 No. Of Havells Orequivalent Make Of Approved Quality Including Connecting Withexisting Wiring In Existingp.V.C.Pipe. Including Allmaterials, Labour And T&P Complete. ( Csi No. 22.06C ) 52 Providing And Fixing Pvc Ball Float Valve 25 Mm Dia. With Brass & Union Complete, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.06 C ) 53 Providing And Fixing Non Return Reflex Valve, 20 Mm Dia Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.07 B ) 54 Providing And Fixing Non Return Reflex Valve, 25 Mm Dia Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.07 C ) 55 Providing And Fixing Pvc Connection Pipe, 300X15 With 2 Brass Units Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.09 ) B 56 P / F Gi Unions Nominal Bore 25 Mm, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.10 C ) 57 P / F Gi Unions Nominal Bore 20 Mm, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.10 B ) 58 Supply And Fixing Of Syntex Or Equivalent Make Water Storage Tank Including All Materials, Labours, T&P Etc Required For Proper Completion Of Work. ( Csi No. 26.12 ) 59 Providing And Fixing Cp Brass Bib Cock15 Mm Dia. Heavy Quality ( 200Gm ) ( L & K And Equi. ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.16 B ) 60 Providing And Fixing Of 110 Mm Dia Pvc Pipe 6 Kg / Sq.Cm Forwith Special Such As Tee, Bend, Socket, Elbow Etc Including Supply Of All Labour, Material, T & P Etc Complete Required For Proper Completion Of Work. ( Csi No. 26.17 ) 61 Providing And Fixing First Quality White Glazed Orissa Pattern W.C.Pan Hindware, Cera Make. Size 580 Mm. ( Hindware, Cera Make ) With Out P Trapincluding Supply Of All Materials, Labour And T&P Etc.Complete. ( Csi No. 27.01 ) 62 Providing And Fixing 550X400 Mm Wash Hand Basin Of White Glazed Earthern Ware First Quality I.S.I. Marked ( Hindware, Cera Make ) Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 27.08 ) 63 Providing And Fixing 10 Litres Low Level Pvc Flushing Cistern, Complete With All Fittings Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 27.12 ) 64 Providing And Fixing In Position 32 Mm. Dia P.V.C. Flush Pipe. For W.C. With Unions, Bends Etc. Including Supply Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 27.13 ) 65 Providing And Fixing In Position 32 Mm. Dia P.V.C.Waste Pipe For Wash Basin. Including Supply Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 27.14 ) 66 Providing And Fixing 600 Mm X 450 Mm Beveled Edge Mirror Of Atul, Kiran Makeglass With Indian Polish 6.50 Mm Thick Complete With Back Of 600 Mm X 450 Mm X 6 Mm Hard Board Sheet Fixed To Wooden Cieats With C.P. Brass Screws And Washers Including Supply Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 27.15 ) 67 Supply And Fixing Cp Nahani Trap India Make Of Heavy Approved Quality Complete With Ci Grating, Includingsupply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 27.21A ) 68 Providing And Fixing 100 Mm Dia Pvc P Or S Trap Including Cement Concrete And All Materials, Labour Cartage T&P Etc.Required For Proper Completion Of The Work. ( For W.C. ) ( Csi No. 27.24 ) 69 Providing And Laying Swr, Pvc ( Finolex Or Equivalent ) Pipe Including Cost Of Excavation, C.C Etc Including Its Jointing And Connection, All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 27.29 C ) 110 Mm Dia 70 Providing And Fixing 19 Mm Thick Ply Board / Block Board For Wardrobe Shutter Etc. Of Reliance Or Scorpio Or Equivalent Make Including Teak Wood Beading Around The Shutter And Including Fixing And Adjustment Of Hinges, Bolts Handle And Other Fittings But Excluidng Their Supply And Including Cost Of All Material Labour, T&P Etc. Required For The Proper Completion Of The Work. ( S. No. 8.25 ) 71 P / Fof 6.0Mm Thickwater Proof Commercialquality Plywood In Partition Work To Make 5X4mm Size Groove At Specified Intervals. Ply Shall Be Fixed By Means Of Glue And Headless Nailsat 100Mm C / C Complete. Cost Including All Labour, Material, T&P Required For Proper Completion Of Work. ( S. No. 8.30 ) 72 S&F Of 6 Amp To 32 Amp. Spmcb ( 10 Ka ) C Curve 2018 Pwd 1002 A Cat B 73 S&F Surface / Flush Mounting 4 Ways Spn Distribution Board With Additional Metal Door Without Mcb Complete In All Respect, As Directed At Site By Engineer In Charge. 2018 Pwd 1022 A Cat B 74 P / F 32 Mm Dia C.P. Waste Jali With Cheknut Complete. ( S.No. 25.29 ) 75 P / F 25 M.M Dia Upvc Pipe Complete With Upvc Special Such As Bends, Tee, Socket, Cross, Clamp Etcrequired For Proper Completion Of The Work The Rate Also Including Upvc Fitting Where Required Cutting And Making Good The Wall Etc And All Materials Labour T&P Etc Complete ( Nsi ) 76 P / F 20 M.M Dia Cpvc Pipe Complete With Cpvc Special Such As Bends, Tee, Socket, Cross, Clamp Etcrequired For Proper Completion Of The Work The Rate Also Including Cpvc Fitting Where Required Cutting And Making Good The Wall Etc And All Materials Labour T&P Etc Complete ( Nsi ) 77 P / F 15 M.M Dia Cpvc Pipe Complete With Cpvc Special Such As Bends, Tee, Socket, Cross, Clamp Etcrequired For Proper Completion Of The Work The Rate Also Including Cpvc Fitting Where Required Cutting And Making Good The Wall Etc And All Materials Labour T&P Etc Complete ( Nsi ) 78 Wiring Point For Light With 1.5 Sq. Mm.Frlsh Pvc Insulated Multistrand Single Core Copper Conductor Cable In Pvc Conduit Pipe On Surface, Complete With 14 Swg Copper Earth Continuity Wire, Gp Box , Piano Type Switch And Ceiling Rose / Angle / Batten Holder On 3 Mm. Thick Phenolic Laminated Backelite Sheet Etc. Complete In All Respect, As Directed . 2018 Pwd 121C 79 Wiring Points For Two Ways Light With 1.5 Sq. Mm .Frlsh Pvc Insulated Multistrand Single Core Copper Conductor Cable In Pvc Conduit Pipe On Surface, Complete With 14 Swg Copper Earth Continuity Wire, Gp Box , Two Ways 2 Nos. Piano Type Switches & Ceiling Rose / Angle / Batten Holder On 3Mm. Thick Phenolic Laminated Backelite Sheet Etc., Complete In All Respect, As Directed. 2018 Pwd 122C 80 Wiring Point For Fan / Fresh Air Fan ( Light Duty Exhaust Fan ) With 1.5 Sq.Mm.Frlsh Pvc Insulated Multistrand Single Core Copper Conductor Cable In Pvc Conduit Pipe On Surface Complete With 14 Swg Copper Earth Continuity Wire, Piano Type Switch & Ceiling Rose On 3 Mm. Thick Phenolic Laminated Backelite Sheet Etc, Complete In All Respect 2018 Pwd 123C 81 Wiring Point For Plug With 1.5 Sq. Mm.Frlsh Pvc Insulated Multistrand Single Core Copper Conductor Cable In Pvc Conduit Pipe On Surface, Complete With 14 Swg Copper Earth Continuity Wire , Gp Box And Piano Type Switch And Socket Etc. Complete In All Respect. 2018 Pwd 124B 82 Supply And Wiring Of Submain With Two Number 4 Sq.Mm. Frlsh Pvc Insulated 1100 V Grade Multistrand Single Core Copper Conductor Cable In 20 Mm Dia Heavy Duty ( 2Mm Thick ) Pvc Conduit With One Number 2.5Sq.Mm Multistrand Copper Conductor Cable As Earth Continuity Wire, Complete In All Respect.2018 Pwd 211C 83 Deduction When Pvc Casing Caping Used In Place Of Pvc Conduit On Surface Wiring. For Light / 2 Way / Call Bell Point. 2018 Pwd 188 A 84 Deduction When Pvc Casing Caping Used In Place Of Pvc Conduit On Surface Wiring. For Fan / Fresh Air Fan Point. 2018 Pwd 188 B 85 Deduction When Pvc Casing Caping Used In Place Of Pvc Conduit On Surface Wiring. For Plug Point. 2018 Pwd 188 C 86 Deduction When Pvc Casing Caping Used In Place Of Pvc Conduit On Surface Wiring. For Hpmv / Sodium Vapour Light Point. 2018 Pwd 188 D 87 Deduction When Pvc Casing Caping Used In Place Of Pvc Conduit On Surface Wiring. For Exhaust Fan Point. 2018 Pwd 188 E 88 Add For Invertor Wiring In Wiring Point For Light / Fan / Plug With 1.5 Mm Cu Wire 2018 Pwd 189 A 89 Supply And Wiring Of Submains With 2 Nos. 4 Sq Mm & With 1 No Earth Wire Of 2.5 Sq Mm Frlsh Pvc Insulated 1100 V Grade Single Core Multistrand Copper Conductor Cable In Existing Pvc Conduit Complete, Including Supply Of All Material, Labour And T & P Etc. Required For Proper Completion Of The Work As Directed By Engineer In Charge 2018 Pwd 291 A 90 Supply & Fixing Of Zinc / Aluminium Alloy Coated High Tensile Steel Sheet Of 0.50Mm Thickness Have Minimum Yield Strength Of 550 Mpa With A Profile Width Of 1072Mm & Efective Width Of 1015Mm Of Durashine Tata Blue Scope Roof & Wall Sheets As Per Approved Shade & Sample By Engineering-In-Charge In Position On Trusses Including Supply Of Maerials, Labour T&P Etc. ( Nsi )
|
