|
Renovation Of Admin And E And I Buildings At Cpcls Cbr In Nagapattinam, Tamilnadu Renovation Of Admin And E And I Buildings At Cpcls Cbr In Nagapattinam, Tamilnadu , Providing & Applying Wall Painting In Exterior Surfaces: Surface Preparation By Water Jetting And Sander, Supply And Application Of Single Coat Of Wall Primer ( Modified Acrylic, Water-Based Alkali Resistantprimer-Cum-Sealer With Silicone Additives ) And Two Coats Of Exterior Emulsion ( Water Based, Modified Acrylic, Exterior With Silicon Additives ) With Amanufacturer Indicated Performance Life Of Minimum 5 Years. Rate Inclusive Erection Of Scaffolding / Movable Safety Harness Like Parapet Anchor For All Heights / Depths, All Tools, Materials, Labor Etc. , Providing & Applying Wall Painting In Interior Surfaces: Surface Preparation By Sander, Filling Of Cracks With Putty , Supply And Application Of Two Coats Of Interior Emulsion ( Water Based, Modified Acrylic, Exterior With Silicon Additives ) With Amanufacturer Indicated Performance Life Of Minimum 5 Years. Rate Inclusive Erection Of Scaffolding / Movable Safety Harness Like Parapet Anchor For All Heights / Depths, All Tools, Materials, Labor Etc. , Providing & Applying Wall Primer In Interior Surfaces: Supply And Application Of Single Coat Of Wall Primer For Interior Surfaces ( Modified Acrylic, Water-Based Alkali Resistantprimer-Cum-Sealer With Silicone Additives ) . Rate Inclusive Erection Of Scaffolding / Movable Safety Harness Like Parapet Anchor For All Heights / Depths, All Tools, Materials, Labor Etc. , Providing & Applying Wall Enamel Painting : Surface Preparation By Water Jetting And Sander, Supply And Application Of Single Coat Of Wall Primer ( Modified Acrylic, Water-Based Alkali Resistantprimer-Cum-Sealer With Silicone Additives ) And Two Coats Of Synthetic Enamel Paint ( Gloss Enamel ) . Rate Inclusive Of Movable Safety Harness For All Heights / Depths , Providing & Applying Enamel Painting For Metal / Woodensurface : Surface Preparation, Supply And Application Of Metal Primer Of Zinc Base / Wood Primer And Two Coats Of Synthetic Gloss Enamel Paint. Rate Inclusive Of Movable Safety Harness For All Heights / Depths , Providing & Applying Wood Finish Coats: Surface Preparation Using Paper 180 And Then Using And Paper 320 And Wipe Clean, Supply And Application Of One Coat Of Sealer Base Coat Andtwo Coats Of Acid Curing Solvent Based 2 Pack Of Wood Finish At An Interval Of About 24 Hours. Sand Lightly With And Paper 320 Between The Two Coats. Rate Inclusive Of Filler As Required. Rate Inclusive Erection Of Scaffolding / Movable Safety Harness Like Parapet Anchor For All Heights / Depths, All Tools, Materials, Labor Etc. , Providing & Applying Of Lime Wash: Surface Preparation By Water Jetting And Sander, Supply And Application Of Two Coats Of Lime Wash As Per Manufacturer Specification. Rate Inclusive Of Movable Safety Harness For All Heights / Depths , Providing And Applying Wall Putty: Supply And Application Of Water Resistant White Cement Based On Interior Surface After Thorough Cleaning As Per Manufacturers Specification Of Make Jk / Birla Of Max Thickness 1.5 Mm For All Heights. Rate Inclusive Erection Of Scaffolding / Movable Safety Harness Like Parapet Anchor For All Heights / Depths, All Tools, Materials, Labor Etc. , Repair Of Existing Plasters Of Varying Thickness Of 12Mm To 20Mm Including Cutting The Patch In Proper Shape, Raking Out Joints, Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Designated Place Within The Refinery Premises With Cement Mortar 1:4 ( 1 Cement : 4 Fine Aggregate ) , Demolishing Of Brick Work Of Any Mortar In Foundations Or At Super Structures Including Disposal Of Unserviceable Materials To The Designated Place Within The Refinery Premises As Directed Andincluding Breaking Into Pieces, All Labor, Tools, Etc. Complete. , Dismantling Cc / Rcc Work By Mechanical Means And Stockpiling At Designated Locations And Disposal Of Dismantled Materials Up To A Lead 100 M, Stacking Serviceable Materials Separately Including Cutting Reinforcement Bars, Scaffolding Breaking Into Pieces All Labor, Tools Supervision , Safety Precaution Etc. Complete. , Demolishing Plain Cement Concrete In Foundation And Super Structure Including Disposal Of Unserviceable Material Up To A Initial Lead Of 100M As Directed Serviceable Materials To Stores Including Scaffolding, All Labor, Tools Supervision, Safety Permits, Safety Precaution Etc. Complete. , Dismantling Tile Workin Floors And Roofs Laid Up To Bed Mortar Of 20Mm Including Disposal To The Dumping Ground Within The Housing Complex Premisesas Per Instruction Of Engineer In Charge , Dismantling Pipe Lines Of Up To 6 Inch Dia Including Gi, Pvc, Cpvc, Cast Iron, Stone Ware Etc. Including Of All Tools And Tackles And Disposaloutside Housing Complex , Dismantling Doors, Windows And Clerestory Windows ( Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking The Material At A Yard Within The Refinery Premisesas Per Instruction Of Engineer In Charge , Providing And Constructing Brickwork In 1:4 Cement Mortar ( 1 Cement And 4Sand ) With Locally Available Best Quality Bricks For Super Structure In All Heights With Cement Mortar Including Racking Out Joints, Watering, Curing, Scaffolding Etc., Complete. Rate Includes Supply Of Opc 53 Grade Cement Grade , Providing And Laying Half Brick Masonry In Cement Mortar 1 : 4 ( 1 Cement : 4 Fine Aggregate ( M Sand ) ) For All Depths And Heightsincluding Cost Of Materials, Labour, Scaffolding, Sampling, Testing, Supplying And Placing 2 No. 6 Mm Dia. Diarebars At Every Third Course, Sealing The Gap Between Masonry And Soffit Of The Beam / Slab, Embedding The Fittings And Fixtures, Curing, Etc. All Complete As Per Specifications, And As Directed By Engineer-In-Charge. Note:- The Cost Of Reinforcement Shall Be Paid Seperately Under Relevant Items. , Earth Work In Excavation Below Groundlevel For All Kinds Of Work Inbasement, Foundations, Tunnels Includingtrenches, Pavements, Wall Footings, Cable Trenches, Pipesleepers, Pits, General Sitegradingetc., In All Types Ofsoilexcept Soft Rock And Hard Rock For A Depthup-To 1.5Mtr. Including Removal Of Vegetation, Shrubsand Debris, Cutting Anddressing Of Sides In Slops, Leveling, Gradingand Ramming Of Bottoms, De-Watering From Any Source And Keeping The Surface Dry Till The Completion Of Subsequent Works Anddisposalor Stacking Of Excavatedmaterial Withinalead Of 50Mtr., Asdirected Including Providing Temporary Supports To Existingservice- Lineslike Water Pipes, Sewerage, Electric-Cables, Etc., Allcomplete, But Excluding Shoring And Strutting. , Back Filling The Available Excavated Earth In Plinth, Trenches, Sides Of Foundations In Depressed Areas In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer By Ramming And Watering Up To 50 Mt Lead And Lift Up To 1.5 Mt. , Transporting And Disposing The Surplus Earth / Debris Generated After Backfilling From Construction Activities, Loading, Unloading, As Directed To Designated Place Within Refinery Premises Upto A Lead Of 3 Kms. , Providing 12Mm Thick Plaster In Cement Mortar 1:4 ( 1 Cement :4Sand ) On Walls / Concrete Surfaces Including Cleaning, Hacking Of Concrete Surfaces, Scaffolding, Finishing, Curing Etc., For All Heights. Rate Includes Supply Of Opc 53 Grade Cement Grade , Providing And Laying Pcc 1:4:8 Nominal Mix Using 40Mmand Down Gradedcoarse Aggregate And Using Opc 53 Grade / Of Approved Make Conforming To Is For Any Thickness Below Foundations, Pile Cap, Raft, Grade Slab, Tank Pads, Dyke & Fire Walls, Pipe Sleepers & Supports, Walkway Platform Supports, Trenches, Pits, Drains, Fillings, Sumps, Chambers, Etc. M Including Shuttering , Tamping, Ramming, Vibrating, Curing, Etc. All In Any Shape, Position, Thickness And Finishing The Top Surface Rough Or Smooth As Specified And Directedall Complete, As Per Drawings, Specifications And As Directed By Engineer-In-Charge. Rate Includes Supply Of Cement. , Providing And Filling Fine Aggregate Of Quality In Floor, Foundation Etc. In Layer Of 15 Cm Thickness Including, Watering, Ramming, Consolidating Etc. Complete. , Providing And Laying Reinforced Cement Concrete1:1.5:3 ( 1 Part Of Cement, 1.5 Part Offine Aggregate And 3 Part Of Stone Aggregate 20 Mm And Down ) In Foundation Below Footing Floor And Raft And Trenches Using Stone Aggregate Including Watering, Curing Ramming With Vibrator If Necessary All Labor And Material Complete As Per Direction Of Engineer In Charge. Including Cost Of Form Work. Using Opc 53 Grade Cement Grade Of Approved Make Conforming To Is. Rate Includes Supply Of Cement. , Providing And Fixing Precast Slabs Beams With Rcc 1:1:5:3 ( 1 Cement, 1.5 Fine Aggregate ( M Sand ) , 3 Stone Aggregate Of 20Mm Nominal Size Including Cleaning, Fixing, Lifting And Placing In Position, Necessary Shuttering, Finishing, Curing But Excluding Cost Of Reinforcement. , Supplying And Placing In Position High Strength Deformed Steel Bars Reinforcement ( Conforming To Is:1786, Grade Fe500 ) , For Rcc Work, Pile, Including Transporting The Steel, Straightening, Cleaning, Decoiling. Cutting, Bending To Required Shapes And Lengths As Per Details, Binding With Contractors Own 16 Swg Black Soft Annealed Binding Wire At Every Intersection, Supplying And Placing With Proper Cover Blocks, Supports, Chairs, Overlaps, Welding, Spacers, Fan Hooks, Scaffolding, Etc. For All Heights And Depths, Etc., All Complete As Per Specifications And Directions Of Engineer-In-Charge. , Providing And Fixing Granite Tiles Of Shade Black Galaxy / Equivalent Of Thickness Not Less Than 18 Mm As Selected By Eic Of Approved Make Over 20 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement : 4 Sand ) And Nosing On Both Sides. Rate Includes Supply Of Opc 53 Grade Cement Grade , Providing And Laying Vitrified Floor Tiles Of Size Above 60 X 60 Cm Anti Skid Type / Gloss Finish Of Make Johnson / Kajaria / Somany / Nitco In All Colors And Shades, Laid On 20 Mm Thick Cement Mortar 1: 4 ( 1 Cement : 4 Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Rate Includes Supply Of Opc 53 Grade Cement Grade , Providing And Fixing Vitrified Glazed Wall Tiles Of Make Johnson / Kajaria / Somany / Nitcoin All Colors, Shades Except Burgundy, Bottle Green, Black Of Size Above 1200 X 600 Mm As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Rate Includes Supply Of Opc 53 Grade Cement Grade , Providing And Laying Vitrified Floor Tiles Of Size Above 1200 X 600 Mm Gloss Finish Of Make Johnson / Kajaria / Somany / Nitco In All Colors And Shades, Laid On 20 Mm Thick Cement Mortar 1: 4 ( 1 Cement : 4 Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Rate Includes Supply Of Opc 53 Grade Cement Grade , Providing And Laying 4 Mm Thick App ( Atactic Polypropelene ) Modified Reinforced Bituminous Waterproofing Membrane Over Terrace And Parapet Including Cleaning And Preparation Of The Surface Consisting Of Making Good All The Cracks And Damages, Filling Potholes / Depressions, Removing Weak Foam Concrete / Plaster And Refilling With Same Wherever Required Thus Preparing Smooth Surface Of The Terrace, Providing And Applying One Coat Of Cold Applied Bitumen Based Primer @ 0.2 To 0.4 Litre Per Sq.Mtr.; Laying The Membrane By Torch Welding Over Primer, Providing 100 Mm Overlaps And Appropriately Pressing The Membrane To Remove Any Entrapped Air, Including Fixing On Parapet After Providing 10 Mm X 20 Mm Continuous Groove In Parapet For Terminating The Membrane And Filling The Groove With Polyurethane Sealant And Continuing This Treatment At Rain Water Outlet Points; Providing Finishing Protective Layer Of 35 Mm Thk. Pcc ( 1:2:4 ) In Panels Of Maximum Size 1200 Mm X 1200 Mm Chequered Finish With 24 Swg Chicken Wiremesh Interposed In Between Finished Smooth With Joints Between Panels Sealed With Suitable Polyurethane Sealant; Providing Fillets Of 75 Mm Radius With P.C.C ( 1:2: 4 ) At Junctions Of Horizontal And Vertical Surfaces Finished Smooth; Providing 450 Mm X 450 Mm Khuras ( Rain Water Collecting Pits ) In 1:2:4 Cement Concrete At All Outlets, Leveled Down By Min. 25 Mm, Finishing, Curing Etc. All Complete As Per Approved Manufacture’S Standard Specifications And Recommendations. , Providing Injection Type Post Construction Water Proofing To Concrete Structures Such As Roof Slabs, Sunken Portions, Intersection Of Chajja & Masonry, Liquid Storage Tanks, Etc. By Installing Minimum 12 / 15Mm Dia Pvc / Aluminium / Gi Nozzles At Suitable Intervals And Mechanically Injecting Single Component Hydrophobic Water-Active Flexible Polyurethane Of Approved Make At Minimum Pressure Of 3 Kg / Sqm As Per Manufacturers Recommendations. The Rate Shall Include All Materials, Labor And Operations And Finishing, Dismantling & Assembling Of False Ceiling / Under Deck Insulation Works If Any, Making Temporary Water Pool Over The Leaky Portion And Removal After Work, Include The Cost Of Providing Fixing And Cutting Off Nozzle Projections Grouting Holes, Etc. Complete As Per The Instructions Of Engineer-In-Charge. ( Only Consumed Chemical In Grouting Work To Be Measured For Payment ) , Providing And Injecting Chemical Emulsion For Post- Constructional Anti-Termite Treatment Using Chemical Imidacloprid 30.5% Sc At 2.1Ml Per Litre Of Water Covering Entire Building Internal As Well As External Wall. The Quoted Rate Shall Be Inclusive Of All Tools, Tackles, Labours, Chemical / Material Cost Etc Complete. , Supplying, Transporting, Storing, Fabricating & Erecting In Position Bolted And / Or Welded Structural Steel Works Like Angles , Channels, Beams, Plates, Pipes, Tubes Etc. At All Heights & Levels And Locations Including All Built-Up Sections / Compound Sections Made Out Of Rolled Sections And / Or Plates / Bent Plates In Existing / New Structural Pipe Supports, Frames, Etc., Cutting To Required Size, Straightening / Bending If Required, Edge Preparation, Cleaning, Scrapping & Welding Of Unsound Joints In Existing Structural Members, Preheating, ( Including Sealing Of Box Section With Continuous Welding ) Finishing Edges By Grinding , Fixing In Line And Level With Temporary Bracings, Including Providing Staging, Scaffoldings, & Working Platforms At All Heights, And Removal Of Same After Erection, Including Preparing The Surface For Painting , Surface Cleaning, Wire Brushing, Removal Of Mill Scale, Dust, Rust, Oil Or Grease Etc Complete Along With Providing Paint System As Follows: ( A ) Applying Inorganic Zinc Silicate Coat 50 Micron Dft ( B ) Two Coats Of Epoxy Primer Paint 50 Micron Dft Each ( C ) Two Coats Of Anti Rust Epoxy Top Coat Paint 75 Micron Dft Each As Per Manufacturers Specifications And As Directed By Engineer-In-Charge. Note:-One Coat Of Zinc Silicate And One Coat Of Epoxy Primer Shall Be Applied On Structural Steel Surfaces After Manual Cleaning Prior To Erection As Per Specifications & As Directed By Engineer-In-Charge. Supply Of All Materials In Contractors Scope. , Dismantling Of Structural Steel Works ( Bolted / Riveted / Welded ) Of All Descriptions ( Taking All Necessary Safety Precautions ) For All Heights & Depths Above & Below Plinth Level Including Supply Of All Tools & Tackles, Consumables, Necessary Scaffolding Etc. Providing Temporary Bracings As Required, Cutting Gusset Plates, Bolts, Nuts, Weldings Etc, Stacking Of Serviceable Materials At Designated Location / Cpcl Storage Yard / Scrap Yard Within The Refinery Premises As Per Direction Of Engineer-In-Charge. , Providing And Fixing Second Class Teak Wooden Frame For Doors, Windows, Cupboards, Air Conditioners, Frame Work For Partition And Ceiling Or Any Wooden Work With Necessary Fixtures And Fastenings Including Necessary Hold Fasts, Polishing Teak Frame Or Painting Frame With Transparent Paint, Applying Two Coats Of Coal Tar Preservatives On The Sides In Contact With Wall For Fames ( And For Ceiling Frame While Surface To Be Coal Tarred ) Including Making Necessary Grooves, Grouting, Making Good All Damages Done Inclusive Of All Labor, Material Etc. Complete. , Providing And Fixing For Flush Doors With 3 Mm Decorative Veneering Of Approved Shade / Pattern With All Labor, Materials Etc. Complete. , Providing And Fixing False Ceiling With 12 Mm Thick Plain / Semi Perforated Or With Design Ceiling Tiles Of Bwp Type Phenol Formaldehyde Synthetic Resin Bonded Pressed Particle Board Conforming To Is: 3087 Finished With A Coat Of Aluminium Primer On Both Sides & Edges And Two Coats Of Synthetic Enamel Paint Of Approved Quality On Exposed Face Fixed To A Grid Made Out Of Anodized Aluminium ( With 15 Micron Anodic Coating ) T - Sections 35 X 15 X 1.5 Mm Size Main Runners And Cross Runners 23.5 X 19 X 1.5 Mm Fixed To Main Runners Placed 600 Mm Centre To Centre Both Ways So As To Form A Grid Of 600 Mm Square. The Frame Work Shall Be Suspended From Ceiling By Level Adjusting Hangers Of 6 Mm Dia Ms Rod Fixed To Roof Slab By Means Of Ceiling Cleats. The Suspenders Shall Be Placed 600 X 1200 Centre To Centre Including Fixing To The Frame With Cp Brass Screws And Applying Priming Coat Of Zinc Chromate Yellow Primer ( Aluminium Frame Work Shall Be Paid Separately ) . , Renewing Glass Panes, With Glazing Clips And Special Metals Ash Putty Of Approved Make, And Metal Beading With Screws ( Cost Of Aluminium Beading Shall Be Paid Separate Under Relevant Items Of Work ) Wherever Necessary Including Removal Of Damaged Old Glass Panes If Required, Racking Out Old Putty And Disposal Of Unserviceable Materials Within Refinery Premises As Directed By Engineer-In-Charge Using Wired Glass Panes Of Thickness 6 Mm. , Providing And Fixing In Position First Quality Non Reflective Type Polyester Sun Control Film Of Garware Or Equivalent Approved Make Of 25 Micron Thickness Including Cleaning The Door / Ventilator Panes, Trimming The Edges Etc. Complete As Per The Instructions Of Engineer-In-Charge. , Providing And Fixing Anodized Aluminium Work ( Anodized Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of 15 Micron ) For Doors, Windows, Ventilators And Partitions / False Ceiling Framework With Extruded Built Up Standard Tubular / Appropriate Z Sections / Tee / Angle Sections And Other Sections Of Approved Make, Fixed With Rawl Plugs And Screws Or With Fixing Clips, Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gaps At Junctions, At Top, Bottom And Sides With Required Pvc / Neoprene Felt Etc. Aluminium Sections Shall Be Smooth Rust Free, Straight, Mitered And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing And Paneling To Be Paid For Separately ) :For Fixed Portion, Minimum Anodic Coating Of Grade Ac 15 Shall Be Provided , Providing And Fixing Is : 3564 Marked Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. , Providing And Fixing Beveled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6Mm Thick Hard Board Ground Fixed To Wooden Cleats With Cp Brass Screws And Washers Complete. , Providing And Fixing Bright Finished Brass 100Mm Mortise Latch And Lock Isi Marked With Six Levers And A Pair Of Anodized ( Anodic Coating Not Less Than Grade Ac 10 As Per Is:1868 ) Aluminium Lever Handles With Necessary Screws Etc. Complete , Providing And Fixing Stainless Steel Door Handles Of 12 Long Grade 304 Of Approved Design , Supply And Fixing Of Plain Customized Polyester Blend Corded Blackout Roller Blinds Of Minimum Thickness 1.5 Mm ( Heat Reflective With Complete Water Repellent With Cord Tensioner ) For Windows Oas Perthe Direction Of Eic Including All Fixtures, Tools, Tackles Etc. , Providing And Fixing Of Designer Frosted Glass Stickers Of Approved Design By Eic , Providing And Fixing False Ceiling Using ( Acp ) - 4 Mm Thick ( 0.5 Mm Thick Aluminium Sheet On Top & Bottom Sandwiched With 3 Mm Thick Core Material Confirming To Bs 1467 In Combination With Approved Solidand Metallic Color Panels Laminated Sandwiched Composite Panelto A Grid Made Out Of Anodized Aluminium ( With 15 Micron Anodic Coating ) T - Sections 35 X 15 X 1.5 Mm Size Main Runners And Cross Runners 23.5 X 19 X 1.5 Mm Fixed To Main Runners Placed 600 Mm Centre To Centre Both Ways So As To Form A Grid Of 600 Mm Square. The Frame Work Shall Be Suspended From Ceiling By Level Adjusting Hangers Of 6 Mm Dia Ms Rod Fixed To Roof Slab By Means Of Ceiling Cleats. The Suspenders Shall Be Placed 600 X 1200 Centre To Centre Including Fixing To The Frame With Cp Brass Screws And Applying Priming Coat Of Zinc Chromate Yellow Primer. Rates Are Inclusive Of Scaffolding ( Aluminium Frame Work Shall Be Paid Separately ) - , Providing And Fixing To Existing Door Frames 30 Mm Thick Glass Fibre Reinforced Plastic ( Frp ) Paneled Door Shutter Of Required Color And Approved Brand And Manufacture, Made With Fire - Retardant Grade Unsaturated Polyester Resin, Molded To 3 Mm Thick Frp Laminate For Forming Hollow Rails And Styles, With Wooden Frame And Suitable Blocks Of Seasoned Wood Inside At Required Places For Fixing Of Fittings, Cast Monolithically With 5 Mm Thick Frp Laminate For Panels Conforming To Is: 14856, Including Fixing To Frames. , Providing And Fixing Fiber Glass Reinforced Plastic ( Frp ) Door Frames Of Cross-Section 90 Mm X 45 Mm Having Single Rebate Of 32 Mm X 15 Mm To Receive Shutter Of 30 Mm Thickness. The Laminate Shall Be Molded With Fire Resistant Grade Unsaturated Polyester Resin And Chopped Mat . Door Frame Laminate Shall Be 2 Mm Thick And Shall Be Filled With Suitable Wooden Block In All The Three Legs. The Frame Shall Be Covered With Fiber Glass From All Sides. M.S. Stay Shall Be Provided At The Bottom To Steady The Frame. , Supply And Fixing Of Stainless Steel Net Made Up Of 304 F Grade Alloy For Door And Windows, Supported By Removable Aluminum Frames Supported By Pins Made From Sturdy Virgin Aluminum Alloys Coated With “Asanable Powder Coating”. , Dismantling False Ceiling, Partition Walls Including Stacking Of Serviceable Materials At Designated Location And Disposal Of Unserviceable Materials To The Designated Place Within The Refinery Premisesas Per Instruction Of Engineer In Charge , Supply And Fixing Of 10 Mm Thick V Board ( Fibre Cement Boards ) Of Approved Make As Per Eic For Internal Wall Panelling With Minimum Density Of 1200 Kg / Cum, Mor Of 10 N / Mm2 With Resistance For Water, Fire And Termite. The Quoted Rate Shall Be Inclusive Of All Tools, Tackles, Labours, Material Cost, Levelling Of Wall Surface With Wooden Pieces To Obtain Smooth Finish, Making Pockets For Eletrical Fittings Etc , Supply And Fixing Of Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets Of 1Mm Thickness Having High Impact, Scratch, Wear And Moisture Resistance For Internal Walls Of Approved Design And Make As Per Eic For Wall Panelling / Cupboards / Doors Etc.The Quoted Rate Shall Be Inclusive Of All Tools, Tackles, Labours, Material Cost, Adhesive, Making Pockets For Eletrical Fittings Etc , Supply And Fixing Of Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets Of .72 Mm Thickness Having Medium Impact, Scratch, Wear And Moisture Resistance For Internal Wall Panelling / Cupboards / Doors Etc.The Quoted Rate Shall Be Inclusive Of All Tools, Tackles, Labours, Material Cost, Adhesive, Making Pockets For Eletrical Fittings Etc , Supply And Fixing Of Marine Grade Plywood Of 19 Mm Thickmanufactures With Pressure Impregnation Water Soluble Or Oil-Based Preservatives Having Retention Of A Minimum Of 12 Kg / M3 Glue Shear Strength Not Less Than 1 000 N And Tensile Strength Not Less Than 42.0 N / Mm2 Parallel To Grain Direction Approved Make By Eic For Wall Panelling / Cupboards / Doors Etc. The Quoted Rate Shall Be Inclusive Of All Tools, Tackles, Labours, Material Cost, Adhesive, Making Pockets For Eletrical Fittings, Edge Tapes To Seal Joints In Match With The Mica Colour Etc , Supply And Fixing Of 4Mm Thick Etched Glass Of Approved Design By Eic For Windows / Cupboards Etc. The Quoted Rate Shall Be Inclusive Of All Tools, Tackles, Labours, Material Cost, Adhesive Etc , Supply And Fixing Of European Style Stainless Steel Clip-On Soft Close Concealed Cabinet Hinges For Cupboards Etc. The Quoted Rate Shall Be Inclusive Of All Tools, Tackles, Labours, Material Cost, Adhesive Etc , Supply And Fixing Of Multi Purpose Aluminium Lock With Reversible Key For Cupboard Of Make Godrej Etc.The Quoted Rate Shall Be Inclusive Of All Tools, Tackles, Labours, Material Cost Etc , Supply And Fixing Of Pull Type Zinc Alloy Handles Of Chrome Finish 6 Size For Cupboard. The Quoted Rate Shall Be Inclusive Of All Tools, Tackles, Labours, Material Cost Etc , Supply And Fixing Of S.S. Finish Tower Bolt ( 4 Inch ) For Cupboard. The Quoted Rate Shall Be Inclusive Of All Tools, Tackles, Labours, Material Cost Etc , Supply And Fixing Of Pvc Magnetic Door Catcher For Cupboard. The Quoted Rate Shall Be Inclusive Of All Tools, Tackles, Labours, Material Cost Etc , Supply And Fixing Of Upvc White Color Windows With 4Mm Glass And Necessary Accessories As Per The Directions Of Eic Including Necessary Labor, Tools, Tackles Etc. , Providing And Fixing White Wall Hung Rimless Wc With Uf Sift Close Slim Seat Cover Along With All Accessories Dimensions 355X525x380 Mm Of Make Jaguar ( Model No. Drs-Wht-37953Biufsm ) / Toto / Kohler Along With Necessary Fittings Namely Concealed Flush Tank ( Jcs-Wht-2400 ) , Flush Plate ( Cp-2415 ) , Two Way Bib Cock ( Ari-39041 ) , Health Faucet ( Ald-573 ) , Connector Hose ( Ald-803Ab ) Etc. , Providing And Fixing White Vitreous Orissa Pedestal Type Water Closet ( Indian Type W.C. Pan Model No. Parryware Dimensions 580X445x300 Mm Or Equivalent ) With 10 Litre Low Level White P.V.C. Flushing ( Cistern Johnson Ultima Duo Double Flush ) , Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is :7231, With All Fittings And Fixtures, Angle Valve, Hose Complete, Including Cutting And Making Good The Walls And Floors Wherever Required :Including Dismantling Of Exisitng Iwc / Ewc, Clearing Sand Cushion, P & S Trap, Connecting Pipe Linesand Disposing The Uncerviceable Material At The Designated Place Of Disposal Including All Labour Tools Etc Complete , Supply And Ixing Bib Cock With Flangeof Make Johnson ( Model No. T1805c ) / Hindware / Parryware Along With Necessary Accessories As Per The Directions Of Eic Including Necessary Labor, Tools, Tackles Etc. , Providing And Fixing White Wall Hung Urinal Of Dimensions 375X320x620 Mm Ofmake Jaguar ( Model No. Urs-Wht-13253O ) / Toto / Kohler Along With Necessary Fittings Namely Concealed Flush Cock ( Flv-1093N ) Etc. , Supply And Fixing Of Curved Shaped Urinal Partition With Frosted Glass Of Dimensions H: 900 W: 450 Th: 10Mm Of Make Jaguar ( Model No. Se-Chr-110Uc450x ) Or Equivalent Make Of Toto / Kohler Along With Crome Finish Necessary Clamps Etc. , Supply And Fixing Of Towel Ring Round With Round Flange -Jaquar Acn-1121Bn Or Equivalent Make Of Kohler / Toto , Supply And Fixing Of Towel Rail 600Mm Long Stainless Steel - Jaguar -Acn-1111Sm Or Equivalent Make Of Kohler / Toto , Proving And Fixing White Counter Top Wash Basin Of Size 615X415x150 Mm Of Make Jaguar ( Model No. Drs-Wht-3760 ) / Toto / Kohler Along With Necessary Fittings Namely Tall Body Pillar Cock ( Johnson Model No. Ari-39005B ) , Angle Cock ( Johnson Model No. Con-053Kn ) , Clamps, Waste Hose Coupling, Connector Hose, Bottle Trap Etc. , Supply And Fixing Of Wall Mounted Glass Manual Soap Dispenser -Jaquaracn 1135N Or Equivalent Make Of Ess / Hindware / Parryware , Supply And Fixing Of Robe Hook -Johnson T1353c Or Equivalent Make Of / Hindware / Parryware , Supply And Installation Ofss Kitchen Sink Of 24 X 18 ( Dimensions : 610X450mm Bowl Dimensions : 550X390x225mm ) With Waste Hose Coupling, Waste Hose, Sink Cock Ofjohnson ( Model No. T2918c ) As Per Direction Of Engineer-In-Charge , Supply And Fixing Of Toilet Roll Holder -Johnsont1354cor Equivalent Make Of / Hindware / Parryware , Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes ( Exposed On Wall ) , Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings Including Fixing The Pipe With Clamps At 1.00M Spacing For Non-Embedded Works. This Includes Jointing Of Pipes & Fittings With On Step Cpvc Solvent Cement And Testing Of Joints, Scaffolding Complete As Per Direction Of Engineer-In-Charge For Pipes Of 2 Dia , Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes ( Exposed On Wall ) , Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings Including Fixing The Pipe With Clamps At 1.00M Spacing For Non-Embedded Works. This Includes Jointing Of Pipes & Fittings With On Step Cpvc Solvent Cement And Testing Of Joints, Scaffolding Complete As Per Direction Of Engineer-In-Charge For Pipes Of 1 Dia , Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes ( Concealed Inside Wall ) , Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings Including Fixing The Pipe With Clamps At 1.00M Spacing For Non-Embedded Works. This Includes Jointing Of Pipes & Fittings With On Step Cpvc Solvent Cement And Testing Of Joints, Scaffolding Complete As Per Direction Of Engineer-In-Charge For Pipes Of 1 Dia , Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes ( Concealed Inside Wall ) , Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings Including Fixing The Pipe With Clamps At 1.00M Spacing For Non-Embedded Works. This Includes Jointing Of Pipes & Fittings With On Step Cpvc Solvent Cement And Testing Of Joints, Scaffolding Complete As Per Direction Of Engineer-In-Charge For Pipes Of 3 / 4 Dia , Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes ( Concealed Inside Wall ) , Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings Including Fixing The Pipe With Clamps At 1.00M Spacing For Non-Embedded Works. This Includes Jointing Of Pipes & Fittings With On Step Cpvc Solvent Cement And Testing Of Joints, Scaffolding Complete As Per Direction Of Engineer-In-Charge For Pipes Of 1 / 2 Dia , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Sewerage Line Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10Mm Gap For Thermal Expansion ( Single Socketed Pipes ) With Necessary Fittings / Accessories Etc. Complete. Rate Inclusive Of Scaffolding. For Pipes Of 2 Dia , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Sewerage Line Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10Mm Gap For Thermal Expansion ( Single Socketed Pipes ) With Necessary Fittings / Accessories Etc. Complete. Rate Inclusive Of Scaffolding. For Pipes Of 4 Dia , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Sewerage Line Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10Mm Gap For Thermal Expansion ( Single Socketed Pipes ) With Necessary Fittings / Accessories Etc. Complete. Rate Inclusive Of Scaffolding. For Pipes Of 6 Dia , Providing And Fixing Brass Gate Valve With Ci Wheel Of Approved Quality ( Leader Make ) With Isi Mark ( Screw Ended ) 25Mm Nominal Bore , Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank Isi : 12701 Marked With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. Dismantling Of Existing Tankand Disposal To Designated Place Within Refinery Premises To Be Carried Out As Directed By Eic If Required , Providing And Fixing 20 Mm Float Valve, With Brass Connecting Rod And Ball Set With Reducer If Required Of Approved Make , Supply And Fixing Of Stainless Steel Anti Cockroach Anti-Foul Bathroom Kitchen Floor Drain Popup Drainer Trap Gutter Jali, Silver, Medium , Hiring Of Machineries On Demand Basis. The Quoted Rate Is Inclusive Of Charges Towards Mobilization If Any, Hire Charges, Consumables Fuel / Oils / Lubricants, Operator Crews Costs, Supervision, Overhead & Profit, Safety Permits, Safety Precaution Etc. Complete. For Continuous Tracked Tractor Hydraulic Excavator ( 3D ) With Attachments Such As A Breaker, A Grapple Or An Auger. , For Tractor With Trolley , For Tipper Lorry Of Capacity 8-10 Cum , Supply Of Unskilled Class Labourto Carry Out Petty Works Not Assessable For Measurements / Minor Repair Works, On Day-To-Day Basis During The Cpcl General Shift Hours ( 0830 - 1700 Hours ) On All Regular Working Days From Monday To Saturday. The Rates Shall Include Esi, Pf, Payroll Cost And Allowances, Fringe Benefits, Overhead Supervision, Profits And Hand Tools. Payment For Part Of The Day Will Be Made On Prorata Basis. , Same As Sl. No. 910 Above, But For Supply Ofsemi Skilled Labour ( Like Stone Cutter, Office Assistant, ) , Same As Sl. No. 910 Above, But For Supply Of Skilled Labour ( Like Mason, Carpenter, Plumber ) , Supply And Fixing Of Rubber Anti Slip Door Mat Inclusive Of All Materials, Labor, Tools, Tackles, Removal Of Exiting Wall Paper If Required Etc. , Supply And Fixing Of Sign Boards / Name Boards In Pvc Foam Board Plastic Material Of 3 Mm Thickness On Walls / Metal Boards Etc Inclusive Of All Materials, Labor, Tools, Tackles, Removal Of Exiting Boards If Required Etc. , Supply And Fixing Of Automatic Puremist Hand Sanitizer Dispenser Of Make Livpure / Jaguar / Kent , Supply And Fixing Of Contactless Hands-Free Foot Operated Door Opener In Ss304 Of Make Godrej Or Equivalent , Supply And Fixing Of Kimberly Clark Aquarius Slim Hard Roll Towel Dispenser 69530 With Scott Hard Roll Paper Towels 12388 ( Hrt Dispenser & Paper Towel Roll Combo ) Or Equivalent , Supply And Fixing Of Luminous Vento Deluxe 150 Mm Exhaust Fan For Kitchen, Bathroom, And Office ( Cut-Out Size - Sq 192 X 192 Mm, White ) Or Equivalent Of Make Usha / Havells / Orpat , Supply And Fixing Of 6W Led Down-Light Mountable On False Ceiling - Warm White Colour , Supply And Fixing Of 6W Led Curved Mirror Light For Mirror Lights - Warm White Colour , Polishing Of Existing Marble Stone Flooring Including Cost Of Labor, Materials, Tools And Tackles Etc. , Polishing Of Existing Mosaic Flooring Including Cost Of Labor, Materials, Tools And Tackles Etc. , Providing And Fixing Double Scaffolding System On The Exterior Side, Up To Sevenstory Height Made With 40Mm Diam.S.Tube 1.5M Centre Horizontal &Vertical Tubes Joining With Cup & Locksystem With M.S.Tubes, M.S.Tubechallies, M.S.Clamps And M.S.Stair Casesystem In The Scaffolding For Workingplatform Etc., And Maintaining It In Aserviceable Condition For Therequiredduration As Approved And Removing Ithere After. The Scaffolding System Shallbe Stiffened With Bracings, Runners, Connection With The Building Etc.Wherever Required Forinspection Of Workat Required Locations With Essentialsafety Features For The Workman Etc.Complete As Per Directions And Approvalof Engineer-In-Charge. The Payment Wll Be Made Once Irrespective Of Duration , Chipping Of Unsound / Weak Concrete Material From Slabs, Beams, Columnsetc., With Standard Power Drivenpercussion Type Of Pneumatic Chisel Ofstandard Make As Directed By Engineerin Charge. Includig Tapering All Edgesmaking Square Shoulders Of Cavitiesremoving Concrete All Roundreinforcement Including From Behind Thereinforcing Bars To Give An Average25mm ( But Not Less Than 15Mm Clear Air Gap ) Upto 100 Mm Thick , Providing And Fixing Special Water Tight Centering Including Bolting, Strutting, Propping, Etc., So As To With Stand A Pressure Of 0.1Mpa Including Removal Of Forms For All Location Including Beams Columns Slabs, Walls, Foundations, Footings, Landings, Stairs, Balconies Etc , Providing And Placing In Position Micro Concrete Of Grade M55 With Graded Coarse Aggregates Of Maximum Size 12Mm Of Ratio 1:0.75 ( Mc : Agg ) If Repair Section Greater Than 50 Mm Depth, Which Shall Be Cement Based Pre-Packed Single Component Of Make Fosroc / Sika / Basf, Chloride Free, Non-Shrink, Free Flow, Self Compacting Ready To Use After Mixing Water In Specified Proportion Obtained From Approved Manufacturer As Per Specification And Direction Of Engineer In Charge In Columns, Beams, Roofs Etc By Pouring / Pumping / Making Pockets For Pouring. Curing Has To Be Carried Out Using Polymer Based Continuous Film Forming Curing Compound. , Mixing And Applying Bonding Coat, Exluding Cost Of Material, On Prepared Non Metallic Surface Of Parent Materialas Per Specifications And Direction Of Engineer -In -Charge Complete. , Supply Of Approved Epoxy ( Total Weight Of Resin & Hardener In Proportion Specified By Manufacturer ) Bonding Material For Prepared Non Metallic Surface. , Applying Alkaline Passivating & Anticorrosive Coat Of Approved Epoxy Zinc Anti Corrosive Primer For Reinforcements, Excluding The Cost Of Material But Including Supplying And Sprinkling Silica Sand ( No.10 ) Over Steel Reinforcement Duly Approved By Engineer In Charge. For Steel Reinforcement Bars Upto & Including 12Mm Diameter , Applying Alkaline Passivating & Anticorrosive Coat Of Approved Epoxy Zinc Anti Corrosive Primer For Reinforcements, Excluding The Cost Of Material But Including Supplying And Sprinkling Silica Sand ( No.10 ) Over Steel Reinforcement Duly Approved By Engineer In Charge. For Steel Reinforcement Bars Above 16Mm Diameter , Supply Of Alkaline Passivating & Anticorrosive Coat Of Approved Epoxy Zinc Anti Corrosive Primer For Reinforcements ( Payment Shall Be Qty Of Resin Plus Hardener In Manufacturer Specified Proportion ) For Steel Reinforcement. , Introducing New Reinforcement Bar For Structural Connections In Rcc Beams, Lintels, Columns And Slabs Includingpower Drilling Holes Of Appropriatediameters In Reinforced Or Plain Cementconcrete A Minimum Depth Of 150Mmand Upto 200Mm Fixing Thereinforcement In Position Drilling Inconcrete, Epoxy Cartridges, Plasticnozzle Etc., Complete Including Cleaningthedrilled Holes Of Loose Dust Byblowing Air. The Cost Of Reinforcementshall Be Payable Separately. Upto And Including For 12Mm Dia Reinforcing Bar. , Introducing New Reinforcement Bar For Structural Connections In Rcc Beams, Lintels, Columns And Slabs Includingpower Drilling Holes Of Appropriatediameters In Reinforced Or Plain Cementconcrete A Minimum Depth Of 150Mmand Upto 200Mm Fixing Thereinforcement In Position Drilling Inconcrete, Epoxy Cartridges, Plasticnozzle Etc., Complete Including Cleaningthedrilled Holes Of Loose Dust Byblowing Air. The Cost Of Reinforcementshall Be Payable Separately. Above For 12Mm Dia Reinforcing Bar. , Electrical Works , Lighting System: Supply And Fixing Of Plastic / Metal Boxes Of Following Sizes With All Accessories Including Necesssary Base Frame Plates / Mounting Plates Etc., Suitable For Fixing Decorative Switches Of Type Roma Or Equivalent Make Of Havells / Siemens / Anchor / L&Tas Perdirection Of The Engineer-In-Charge. , 1 Or 2 Module Box , 3 Module Box , 6 Module Box , 8 Module Box , 12 Module Box , Supply, Fixing And Connection Of Modular Type Of Anchor Make ( Roma ) Or Approved Equivalent Make Switch, Socket Bell Push Etc In Havells / Siemens / Anchor / L&T, Complete With Labour And Materials As Perdirection Of The Engineer-In-Charge. , 10 A, 1 Way Switch , 20 A, 1 Way Switch , 3 Pins 5 / 6 Amps Socket With Isi Mark , 3 Pins 10 / 20A, Heavy Duty Uni Socket Outlet With Isi Mark , Pedestal Fan: The Scope Of Work Includes Supply Of Pedestal Fans Of Bajaj / Crompton Greaves / Khaitan / Usha / Havells Make Of 300 Mm Sweep And Installation, Testing & Commissioning Of The Same, Including Wires And Accessories As Required, All Complete With Labour And Material, As Per The Specifications Of This Tender And Directions Of Engineer-In-Charge. , Exhaust Fan: The Scope Of Work Includes Supply Of Fresh Air Fan / Exhaust Fan Ofalmonard / Bajaj / Crompton Greaves / Khaitan / Usha / Havells Make Ofbelow Mentioned Sweep And Installation In Existing Frames, Testing Andcommissioning Of Fresh Air Fan / Exhaust Fan, Including Lead In Wires Andaccessories As Required, All Complete With Labour And Material, Withnecessary Fixing Accessories, Louvers Wherever Required, As Per The Specifications Of This Tender And Directions Of Engineer-In-Charge. , 300 Mm Sweep , 450 Mm Sweep, Heavy Duty Industrial Type , Outdoor Lighting: Wp Well Glass Light Fixtures:The Scope Of Work Includes Supply, Installation, Testing Andcommissioning Of 40W Wp Well Glass Led Lights Of Approved Make Suitable For Mounting With Platform / Poles, As Per Directions Ofengineer-In-Charge. , Socket Outlet: The Scope Of Work Includes Supply And Fixing Of 20 Amps., 240 Volts, Spn Industrial Type, Socket & Outlet, With 2 Pole And Earth, Metal Enclosedplug Top Alongwith 20 Amps, G-Series, Sp, Mcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Outlet, Including Connections, Testing And Commissioning Etc. As Required, All Complete With Labour And Materials, As Per Directions Of Engineer-In-Charge. Note:Isi Marked Sockets Of Approved Make Shall Be Used. , Mcbs: The Scope Of Work Includes Supplying And Fixing Of 5 Amps. To 32 Amps, 240 / 415 Volts, 50Hz, 10Ka Miniature Circuit Breaker ( Suitable Formotor, Lighting And Other Inductive Loads Of Following Poles In The Existing Mcb Db With Required Rails / Fasteners For Fixing, Including Connections, Testing Andcommissioning Etc. As Required, All Complete With Labour And Materials, As Per Directions Ofengineer-In-Charge. Note: Isi Marked Mcbs As Per Approved Vendor , Upto 32A, Single Pole , Upto 63A, 4P / Tpn , Rccb: The Scope Of Work Includes Supplying And Fixing Following Rating, Doublepole, ( Single Phase Neutral ) , 240 Volts, Residual Current Circuitbreaker ( Rccb ) , Isi Marked, Having A Sensitivity Current Indicatedmiliamperes In The Existing Mcb Db With Required Rails / Fasteners For Fixing, Including Connections, Testing And Commissioning Etc. Asrequired, All Complete With Labour And Materials, Directions Of Engineer-In-Charge. Note: Isi Marked Rccb Shall Be Used. , Upto 32 A, 30 Ma, 2P , Pvc Conduits: The Scope Of Work Includes Supply & Laying Of Following Size Of Pvc Conduitalongwith The Accessories To Be Used For Installation Insurface / Concealed As Required, As Per The Directionsof Engineer-In-Charge. Note: Only Isi Marked Conduits Shall Be Used. , 20 Mm , 25 Mm , Supply Of Pvc Wires: The Scope Of Work Includes Supply Of Following Size Of Pvc Insulated, Copper Conductor For Laying In The Existing Surface / Recessed, Pvc / Steel Conduit / Pvc Casing And Capping As Required, As Per The Directions Of Engineer-In-Charge.Note: Only Isi Marked Cables Shall Be Used. , 1.5 Sq. Mm. , 2.5 Sq. Mm. , 4.0 Sq. Mm. , Laying Of Pvc Wires: The Scope Of Work Includes Drawing / Laying Of Following Size Of Pvc Insulated, Copper Conductor For Laying In The Existing Surface / Recessed, Pvc / Steel Conduit / Pvc Casing And Capping As Required, As Per The Directions Of Engineer-In-Charge. , 1 X 1.5 Sq.Mm , 3 X 1.5 Sq.Mm , 1 X 2.5 Sq.Mm , 3 X 2.5 Sq.Mm , 2 X 4.0 Sq.Mm , Tube Light Fitting: The Scope Of Work Includes Supply And Fixing Of Led 18 W 6500 K1, Decorative Slim Linear Led Batten Fittings With Bulb Of Havellsatalogue Or Equivalent , Includingcivil Work ( If Any ) Required For Installation, All Complete With Labourand Materials, As Per The Directionsof Engineer-In-Charge , Led Downlights: The Scope Of Work Includes Supply & Fixing Of Recess Mounted, Compactvertical, Round Shaped 10W Led 6000K Downlighter With Removable Driverof Havells Make Or Equivalent Suitable For Low Ceiling Heights, Allcomplete With Labour And Materials, As Per The Directions Of Engineer-In-Charge. , Decorative Luminaire: The Scope Of Work Includes Supply And Fixing Of ( 2X2 ) Decorative Led Luminaire Of Philips Or Equivalent Make, Minimum 34W, 6500K Fiting Or Equivalent In Philips / Cg / Ge / Havells, Including Consumables Required For Suspension / Clamp Arrangement, Civil Work ( If Any ) Required For Installation, All Complete With Labour And Materials As Per The Directions Of Engineer-In-Charge. , 3 Phase 12 Way Distribution Board:- The Scope Of Work Includes Supply, Erection, Connecting, Testing And Commissioning Of 3 Phase 12 Way Distribution Board Concealed Inwall / Partition. The Board Shall Be Powder Coated With Below Mentioned Provisions And Necessary Accessories For Db, All Complete With Labourand Materials, As Per The Specifications Of This Tender And Directionsof Engineer-In-Charge. Note:Isi Marked Components Of Approved Make Shall Be Used. , With Incoming 63A Four Pole Mcb, 63A 30Ma Elcb And Out Going 18 Nos. Of 6 / 10 Amps Mcbs , Supply Of Extension Board:- The Scope Of Work Includes Supply Of 4 Way Extension Board Of Havells Ahlklup104 Maglev Or Equivalent Model, As Per The Directions Of Engineer-In-Charge. , Air-Conditioning System: Supply Of Inverter Air Conditioning Unit: The Scope Of Work Includes Supply Of Minimum 3 Star Inverter Split Air Conditioning Units Of Following Tonnage Of Any Approved Make Including Any Other Hardwares And Consumables Required For Complete Installationas Per Specifications Of This Tender And Directions Of Engineer-In-Charge. , 1.5 Tonnes , 2.0 Tonnes , Installation Of Air Conditioning Unit: The Scope Of Work Includes Installation Of Split Air Conditioning Units With All Related Accessories Of Following Tonnage As Per Specificationsof This Tender And Directions Of Engineer-In-Charge. , 1.5 Tonnes , 2.0 Tonnes , Supply Of Stabilizers: The Scope Of Work Includes Supply, Installation And Commissioning Of Voltage Stabilizers Of Below Metioned Ratings Of V-Guard Or Equivalent Approved Make, For Ac Units As Per Specifications Of This Tender And Directions Of Engineer-In-Charge. , 4 Kva For 1.5 Ton Inverter Ac , 5 Kva For 2 Ton Inverter Ac , Ac Repair & Replacement Works:- The Scope Of Work Includes Supply And Replacement Of Old Equipment For Window / Split Ac Units As Per The Directions Of Engineer-In-Charge. The Maintenance Is Comprehensive Type In Nature. , Supply Of Stand For Fixing Outdoor Of 1 / 1.5 / 2 Ton , Supply Of Copper Tube Of Size 3 / 4 And 3 / 8 For ( Soft Pipe ) During Shifting Of Ac Units , Healthiness Checking Of Ac Unit ( Window / Split Ac ) , Gas Charging Of 1 / 1.5 / 2 Ton Split Ac , Removal Of Ac Unit:- The Scope Of Work Includes Removal Of Window / Split Ac Units As Per Direction Of Engineer-In-Charge , Air Curtain:- Supply And Installation Of Wall Mounted Type, 4 Feet Air-Curtain For New Server Room In Admin Building Of Cbr. Manufacturer: Russell ( Or ) Equivalent , Provisionof Additional Airconditioning To Provide Necessary Noise Reduction:- Provision Of Additional Airconditioning To Provide Necssary Arrangements For Noise Reduction In Ducting And Grill Fascilities: , Supply, Fabrication And Erection Of Fabricated Ducting Made Up Of Gi Sheets Of Complete With Ms Angle Supports Angle Flanges, Anchor Fasteners, Tees And Bends Where Ever Necessary Etc. As Required , 22 Guage Sheet , Supply Fabrication And Erection Of Angle Frame For Ducting , Supply And Fixing Of Extruded Aluminium Powder Coated And Return Air Diffusers Without Volume Control Dampers ( 375X375 ) , Supply And Fixing Of Duct Mouth Damper , Supply And Providing Accoustic For Initial Portion Of Ducting With 12Mm Thick Fiber Glass Rigid Board, Covered With Tissue Paper And Aluminium Perforated Sheets , Rj45 Computer Socket Cat-6 With Shutter & Box , Supply Of Telephone Instruments ( Ip Type ) : Supply Of Ip Basic Telephone Instrument Of Make: Avaya Make Or Equivalent Which Must Compatible With Existing Avaya Telephone Exchange As Per The Direction Of Engineer-In-Charge. , Cat-6 Cabling: The Scope Of Work Includes Supply And Laying Of Cat-6 Type In Pvcpipe / Casing Caping With All Necessary Accessories For Computer Networking. Only Isi Marked Wires Of Make Finolex / Polycab / Havells / Kei / Rpg / V-Guard Shall Be Used. , Dismantling Of Switch & Sockets: The Scope Of Work Includes Dismantling Of All Types Of Switches, Sockets And Plug Points Without Damage And Returning Them To Our Stores Or Anyother Place Or Site Within The Premises As Decided By The Engineer-In-Charge, All Complete With Labour And Materials And Any Other Accessories, As Per The Specifications Of This Tender And Directions Of The Engineer-In-Charge. , Dismantling Of Electrical Wiring: The Scope Of Work Includes Dismantling Of Electrical Wiring ( Comprising Of Single Or Twin Core Pvc Wires Upto 6 Sq Mm And Single Earth Wire Upto6 Swg ) Along With Its Connected Accessories, As Per The Specificationsof This Tender And Directions Of Engineer-In-Charge. , Dismantling Of Fans: The Scope Of Work Includes Dismantling Of All Types & Sizes Of Ceiling Fans With Down Rod And Regulator And Exhaust Fans Of Sweep 350 / 450 Mm Along With Shutter, Frame Etc. Without Damage And Returning Them To Our Stores Or Any Other Place Or Site Within The Premises As Decided By Theengineer-In-Charge. All Complete With Labour And Materials Including Dismantling Of Supports Of Any Type, Down Rods, Condensers And Any Otheraccessories, As Per The Specifications Of This Tender And Directions Ofthe Engineer-In-Charge. , Dismantling Of Structures: The Scope Of Work Includes Dismantling Of Any Support Structures Atground Level. The Scope Of Work Includes Removal Of Structures From Theground Support By Welding / Cutting, All Complete With Labour Andmaterials, As Per The Specifications Of This Tender And Directions Ofengineer-In-Charge. , Manpower Assistance: Full Day Work The Scope Of Work Includes Supply Of Labour Classified Under The Following Categories As And When Required, As Per The Specifications Of Thistender And Directions Of Engineer-In-Charge. ( Kindly Refer The Scope Of Work For Minimum Qualification & Expected Job From Different Classes Of Labour ) . , Highly Skilled , Semi Skilled , Unskilled
|
