|
Repair / Painting Of Steel Furniture At Furniture Yard Under Bso Of Ge Jaipur- 1 Description For Item S / No. 1.01 To 1.03 : Removing Of Existing Unserviceable Ply Woodand S&F New Plywood Bwr Phenol Bounded Commercial Plywood With The Helpof Nut Bolts Including Suitable Washer As Per Drawing And Directed. 2 Bed Hard Steel ( Fd / E6 / Map / 08 ) 3 Charpoy Ip Hardtop ( Fd / Map-Ii / 01 ) 4 Charpoy Ip Folding With Hard Top. ( Fd-388 ( R ) ) 5 Replacement Of Unserviceable Pre Laminated Particle Board From The Head And Foot Rest Assy Of Bed Hard ( Fd / E6 / Map / 08 ) 6 S&F Pvc / Rubber Shoe Of Bed Hard Steel As Per Drg ( Fd / E6 / Map / 08 ) 7 S&F Pvc / Rubber Shoe Of Charpoy Ip Hard Top As Per Drg ( Fd / Map-Ii / 01 ) 8 S&F Pvc / Rubber Shoe Of Charpoy Ip Folding As Per Drg ( Fd-388 ( R ) 9 S&F In Repair Ms Conduct Pipestiffeners Of Charpoy Ip And Bed Hard Made Out Of 25Mm Square Ms Pipe Of 18 Gaugewall Thicknesswith Welding And Painting Neatly With Two Coat Of Synthetic Enamel Paint Black To Match With Existing As Shown On Drawing And Directed. ( Fd / Map-Ii / 01, Fd / E6 / Map / 08 ) 10 M&L For Welding Where Required And Filling Properly At Places Of Welding Point Throughout In Brokenjoints Of Frameincluding Painting Of Replaced Part Of Steel Portion To Match With Existing As Directed. One Broken Point Shall Be Measured As One Point I.E. One Unit. Bed Hard Steel, Charpoy Ip Hardtop And Charpoy Ip Folding With Hard Top ( Fd / Map-Ii / 01, Fd / E6 / Map / 08, Fd-388 ( R ) 11 Repairing Description For Almirah Large And Medium Steel : ( 8.01 To 8.06 ) ( Fd-1031, 1032 ) 12 Taking Out Old Unserviceable Existing Handle And S&F Chromium Plated Handles Including Necessary Nut, Bolts, Washer Etc For Almirah Large Steel / Almirah Medium Steel. 13 Taking Out Existing Shelves And Making The Same In Functioning Condition Including Necessary Nuts, Bolts, Clips And Washer Etc Of Almirah Large / Medium Steel All As Directed. 14 Taking Out Old Unserviceable Leg Of Almirah Large / Medium Steel And S&F New Legs Made Out Of 20 Gauge Ms Sheet Made To Shape And Sizes Shown On Drawing All As Directed. 15 Removing Of Existing Unserviceable Lock From Almirah Medium / Large Steel And Supply And Fix New Brass Lock 6 Lever With Duplicate Key Complete. 16 Removing Existing Locking Device With Ms Plate, Rod And S&F New Locking Device With Plate, Rod Complete In Almirah Large Steel As Directed. 17 All As Per Item No 8.05 Above But In Almirah Medium Steel 18 Painting Description ( For Item No 9.01 To 9.15 ) :-M&L Preparation Old Painted Steel Surfaces I.E Filliing All Holes / Cracks Or Detoriated Spots Of Old Painted Steel Furniture With Primer, ( Internally / Externally ) Putty Then By Cleaning And Applying One Coat Of Synthetic Enamel Paint Olive Green / Black / White / Grey ( As Directed ) With Spray Gun Or By Manual Brush And Roller As Per Requirement In Appropriate Shade Complete Including S&F Hard Rubber Shoe Where Ever Required All As Specified Anddirected By Engineer In Charge. 19 Almirah Large Steel With Shelves Both Side ( Out Side And In Side ) ( Fd-67, Fd-1031 ) 20 Almirah Large Steel With Shelves Out Side Only ( Fd-67, Fd-1031 ) . 21 Almirah Medium Steel With Shelves Both Side ( Out Side And Inside ) ( Fd-67, Fd-350, Fd-1032 ) 22 Almirah Medium Steel With Shelves Out Side Only ( Fd-67, Fd-350, Fd-1032 ) 23 Form With Back ( Steel Frame Only ) ( Fd-78M ) 24 Form Without Back ( Steel Frame Only ) ( Fd-78M ) 25 Table Office Officer Steel Complete ( Outside And Inside ) ( Fd-84, Fd-1003 ) 26 Table Office Clerk Steel ( Outside And Inside ) ( Fd-84, Fd-1004 ) 27 Table Dining Or ( Fd-165M ) 28 Table 3’X2’ Steel With Drawer And Without Drawer ( Fd-1008 ) 29 Teapoy Verandah White Colour ( Fd-255 ) 30 Chair Writing Steel With Arms ( Fd-360 ) 31 Table 900Mm X 900Mm X 860Mm ( Steel ) ( Fd-1009 ) . 32 Locker Steel ( Fd-1029 ) 33 Book Case Steel ( Fd-1028 ) 34 Replacement Description Of Tops ( 10.01 To 10.07 ) :Taking Out Unserviceable Topand S&F New Top Made Out Of 18Mm Thick Prelaminated Particle Board Exterior Grade Make Kitply / Navapan With One Side Exterior Laminatedsheet Including Plain / Half Round 4Mm Thick Teak Wood Edging Around The Top Duly Polished With The Help Of Necessary Screw / Nut Bolts All As Specified In Drg And Directed. 35 Table Dining Or ( Fd-165 ) 36 Table Office Officer Steel ( Fd -1003 ) 37 Table Office Clk Steel ( Fd-1004 ) 38 Table Typist Steel ( Fd-1006 ) 39 Table Top Of Size 3’X2’ With Or Without Drawer ( Fd-1007, Fd-1008 ) 40 Teapoy Verandah ( Fd-255 ) 41 Table 900Mm X 900Mm Steel ( Fd-1009 ) 42 Repairs To Tables ( 11.01 To 11.05 ) : 43 Taking Out Old Unserviceable Lock Of Drawers Of Table Officer Office / Clerk / Typist Steel And S&F Brass Lock With Four Leverslocks With Duplicate Keys. ( Fd-1004, 1003, Fd-1006 ) 44 Taking Out Existing Drawers Of Table Office Clerk / Typist / Officers / Table 3X2 Steel And Re-Fixing Same After Necessary Setting Of Drawers For Free Movement All As Directed. ( Fd-1004, 1003, Fd-1006, 1008 ) 45 Taking Out Old Unserviceable Drawersof Table Office Clerk / Typist / Officers Steel And S&F New Drawers Made Out Of 20 Gauge Ms Sheet Made To Shape And Sizes Shown On Drawing All As Directed. ( Fd-1004, 1003, Fd-1006 ) 46 Taking Out Old Unserviceable Existing Centre Stiffeners / Long Rail Of Table Dining Or And Supplying And Fixing New One Made Out Of 25Mm Square Ms Pipe Of 1.6Mmwall Thickness As Shown On Drawing And Directed. ( Fd-165 ) 47 M&L Welding Throughout In Broken Joints Of Frame Of Table Dining Or, Teapoy Verandah, Table 3’X2’, 3’X3’, Office Officer, Office Clk, Typistetc. Welding At One Broken Point Will Be Counted As One Point. ( Fd-165, 255, 1003, 1004, ) 48 Taking Out Old Unserviceable Seat Plank Of Form With Back And S&F New Plank Of 2Nd Class Hard Wood In One Piece Duly Wrought Upper Side Including Edges And Cleaning The Other Face Bottom Fix With Ms Nut And Washer As Shown On Drawing & Directed Size Of Plank Shall Be 1800Mm X 255Mm X 25Mm. ( Fd-77, 97, 78M ) 49 All As Per Item No 12.00 Above But Form Without Back And Size Of Plank Shall Be 1525Mm X 255Mm X 25Mm. ( Fd-77, 97, 78M ) 50 Tv Trolly ( 14.00 To 14.03 ) :- ( Fd / E6 / Map / 04 ) 51 Replacement Of 5.5Mm Thick Plain Glass Openable Glass Shutters With Magnetic Catcher And Stainless Steel Patch Fitting For Glass Ebco Type All As Per Drg As Directed. 52 Replacement Of Top Of Tv Trolly With 18Mm Thick Pre-Laminated Particle / Mdf Exterior Grade Board Isi Marked Of Approved Shade With 50 X 50Mm Moulded Teak Wood Beading On 3 Sides To Shape To Be Provided All As Per Drg And As Directed. 53 Replacement Of Swivel Type Nylon Castors All As Per Drg And As Directed. 54 Table Bed Side ( 15.00 To 15.07 ) :- ( Fd / E6 / Map / 15 ) Replacement Of Following Unserviceable Parts Made Of 18Mm Pre-Laminated Particle Board Isi Marked All As Per Drg And Directed. 55 Top Of Table Bed Side Of Size 440Mm X 460Mm Alongwith 6Mm Pvc Edging 56 Side / Bottom Pane Of Table Bed Side Of Size 440Mm X 400Mm 57 Back Of Table Bed Side Of Size 460Mm X 440Mm Made Of Ply 6Mm Bwr Grade 58 S&F Front Steel Support / Leg Of Table Bed Side Duly Painted Black In Colour With The Help Of Screws / Washers As Per Drg And Directed. 59 S&F Rear Steel Legs Including Back Of Table Bed Side Duly Painted Black In Colour With The Help Of Screws / Washers As Per Drg And Directed. 60 Tightening Of Steel Support As Well As Particle Board Panes To Make It Serviceable 61 S&F Pvc / Rubber Shoe Of Table Bed Side 62 Locker Steel : ( 16.01 To 16.05 ) ( Fd-1029 ) 63 Taking Out Old Unserviceable Existing Handle And S&F Chromium Plated Handles Including Necessary Nut, Bolts, Washer Etc For Locker Steel. 64 Taking Out Existing Shelves And Making The Same In Functioning Condition Including Necessary Nuts, Bolts, Clips And Washer Etc Of Locker Steel All As Directed. 65 Taking Out Old Unserviceable Leg Of Locker Steel And S&F New Legs Made Out Of 20 Gauge Ms Sheet Made To Shape And Sizes Shown On Drawing All As Directed. 66 Removing Of Existing Unserviceable Haps And Staple And S&F New Set Complete. 67 S&F 20Mm Chromium Plated Steel Conduct Pipe Along With Suitable Bracket 68 Book Case Steel : ( 17.01 To 17.05 ) ( Fd-1028 ) 69 Taking Out Old Unserviceable Existing Handle And S&F Chromium Plated Handles Including Necessary Nut, Bolts, Washer Etc For Book Case Steel. 70 Taking Out Existing Shelves And Making The Same In Functioning Condition Including Necessary Nuts, Bolts, Clits, Clips And Washer Etc All As Directed. 71 Taking Out Old Unserviceable Glass And S&F New Plain Glass 3Mm Including Fixing Of Glass Supporing Ms Plate With Screw / Nut Bolts. The Shape And Sizes As Perdrawing And Directed. 72 Removing Of Existing Unserviceable Locks And S&F New Lock Set ( 04 Nos Of Lock With Two Keys Only ) As Per Drawing And Directed. 73 M&Lwelding Where Required And Filling Properly At Places Of Welding Point Throughout In Broken Frame Of Locker Steel And Book Case Steel. One Broken Point Shall Be Measured As One Point Ie One Unit. ( Fd-1028, 1029 ) 74 Repairs To Charpoy Gi Hard Top ( 18.01 To 18.06 ) :-M&L For Replacement Of Following Parts All As Specified And Shown On Drawings. Fixing And Finishing Shall Be Done In Accordance With Standard Workmanship / Specification And As Directed. ( Fd-220 ( M ) 75 Removing Existing Unserviceable Plywood From Charpoy Gi Pipe And Tightening Of Charpoy Frame, Check Nuts And Elbow As Required And Supply & Fixing Of New Plyaood Of Size 1980X900x12 Mm Thick Bwr Grade Isi Marked By Providing 04 Nos Of Clits Welded 2 On Each Short Rail And 02 Nos Of Stiffner Made Offlat Iron Of Size ( 40X05 X900 ) Mm Duly Painted Black And Ply Shall Be Fixed With 10 Nos Of Suitable Round Headed Nut Bolts And Washer As Approved In Each Charpoy Through Suitable Drill Machine Holes Of Appropriate Size Complete All As Directed. 76 Removing Of Old Long Rail Of Charpoy Gi Pipe And Supply And Fix New Long Rail Of 32Mm Dia Gi Pipe Medium Grade Duly Threaded Both Sides As Required. Drg No Fd-220Note :1.Old Long Rail As Retrieved Shall Be Used For Converting Short Rail Under Item No 18.03 And Charges For Converting Is Included In Unit Rate Of Item.2.Gi Pipe Shall Be Arrange By The Contractor And Pipe Shall Be Isi Marked. 77 Conversion Of Long Rails Of Charpoy Gi Pipe ( Retrieved Under Item No 18.02 ) Into Short Rail By Cutting / Finishing To Shape And Threading And Replacing The Same As Required Against Unserviceable Short Rail. Drg No Fd-220Note :Old Short Rail Retrieved Shall Be Used For Converting The Leg Under Item No 18.04 And Charges For Converting Is Included In The Unit Rate Of Item. 78 Conversion Of Short Rails ( Retrieved Under Item No 18.03 ) Into Leg Rail By Cutting / Finishing To Shape And Threading And Replacing The Same As Required Against Unserviceable Short Rail. ( Drg No Fd-220 ) 79 Removing Old Elbow From Charpoy And S&F 32Mm Bore Medium Grade Gi Elbow, 3 Ways Isi Marked Complete All As Directed. 80 Removing Old Check Nut From Charpoy And S&F New Check Nut 32Mm Bore, 6Mm Thick Galvanised Iron Medium Grade Complete All As Directed. 81 Repair Description Of Steel Chairs ( 19.01 To 19.14 ) : 82 S&F Ms Flat Iron 440Mm X18mm X3mm In Chair Writing Steel Under Seat, Front And Back ( Set Of Two ) With Welding And Painting Neatly In Colour Paint Black Complete All As Directed. ( Fd / E6 / Map / 12 ) 83 Taking Out Unserviceable Seat Of Chair Writing Steel And S&F New Seat12mm, Teak Ply With Ploy Urethane Foam 50Mm Thick Moulded With Density 40 Kgs Per Cum With Fiber Cloth Of Approved Colour And Shade With Black Pvc Beeding Including Necessary Nut Bolts And Washer. ( Fd / E6 / Map / 12 ) 84 Taking Out Unserviceable Back Of Chair Writing Steel And S&F New Back 12Mm, Teak Ply With Ploy Urethane Foam 50Mm Thick Moulded With Density 40 Kgs Per Cum With Fiber Cloth Of Approved Colour And Shadewith Black Pvc Beeding Including Necessary Nut Bolts And Washer. ( Fd / E6 / Map / 12 ) 85 Taking Out Unserviceable Pu Handle Of Chair Writing Steel And S&F New Pu Handle With Screw / Nut / Bolts As Per Drg. ( Fd / E6 / Map / 12 ) 86 Taking Out Unserviceable Seatof Chair Computer And S&F New Seat 12Mm, Teak Ply With Ploy Urethane Foam 50Mm Thick Moulded With Density 40 Kgs Per Cum With Fiber Cloth Of Approved Colour And Shade With Black Pvc Beeding Including Necessary Nut Bolts And Washer. ( Fd / E6 / Map / 01 ) 87 Taking Out Unserviceable Back Of Chair Computer And S&F New Back 12Mm, Teak Ply With Ploy Urethane Foam 50Mm Thick Moulded With Density 40 Kgs Per Cum With Fiber Cloth Of Approved Colour And Shade With Black Pvc Beeding Including Necessary Nut Bolts And Washer. ( Fd / E6 / Map / 01 ) 88 Removing Of Unserviceable Castor From The Chair Computer Revolving Ands&F New Castors As Per Drg And Directed. ( Fd / E6 / Map / 01 ) 89 Removing Of Unserviceable Pvc Base ( 5 Legs ) From The Chair Computer Revolving Ands&F New Pvc Base As Per Drg And Directed. ( Fd / E6 / Map / 01 ) 90 Removing Of Unserviceable Hydraulic Assy From The Chair Computer Ands&F New Hydraulic Assy With Pvc Couplings As Per Drg And Directed. ( Fd / E6 / Map / 01 ) 91 Taking Out Unserviceable Pu Handle Of Chair Computer And S&F New Handle With Suitable Screw / Nut / Bolts As Per Drg. ( Fd / E6 / Map / 01 ) 92 Removing Of Unserviceable Cloth Rexene And Foam Cushion Cloth Of Chair Easy Frame And Supplying And Fixing New Rexene / Lining Cloth / Frame With Cushion 40 Density, 50Mm Thick As Shown In Drawing And As Directed.Size Of Seat Frame Shall Be 560Mm X 535Mm X 50Mm. ( Fd-121M ) 93 All As Per Item No 19.11 Above But Back Frame Of Chair Easy Steel Of Size 560Mm X 355Mm X 25Mm ( Thickness Of Foam Cushion 50Mm & 40Mm Density ) . ( Fd-121M ) 94 Taking Out Unserviceable Writing Board And S&F New Prelaminated Mdf Board Teak Face Of Size 210X 465Mm Duly Edged With Teak Wood Beeding With Screws As Per Drg. Chair Cba With Hand Rest ( Fd-260 ) 95 Taking Out Unserviceable Plastic Seat And S&F New Polypropylene Co-Polymer Seat, Weight Not Less Than1.20 Kg Per Seat To Be Fixed With Screw / Nut / Bolts As Per Drg. Chair Cba With Hand Rest ( Fd-260 ) 96 Chair Writing Steel ( 20.01 To 20.03 ) : 97 Taking Out Unserviceable Seat Of Chair Writing Steel And S&F New Seat12mm, Teak Ply With Ploy Urethane Foam 50Mm Thick Moulded With Density 40 Kgs Per Cum With Fiber Cloth Of Approved Colour And Shade With Black Pvc Beeding Including Necessary Nut Bolts And Washer. ( Fd / E6 / Map / 12 ) 98 Taking Out Unserviceable Back Of Chair Writing Steel And S&F New Back 12Mm, Teak Ply With Ploy Urethane Foam 50Mm Thick Moulded With Density 40 Kgs Per Cum With Fiber Cloth Of Approved Colour And Shadewith Black Pvc Beeding Including Necessary Nut Bolts And Washer. ( Fd / E6 / Map / 12 ) 99 Taking Out Unserviceable Pu Handle Of Chair Writing Steel And S&F New Pu Handle With Screw / Nut / Bolts As Per Drg. ( Fd / E6 / Map / 12 ) 100 Chair Computer ( 21.01 To 21.06 ) : 101 Taking Out Unserviceable Seatof Chair Computer And S&F New Seat 12Mm, Teak Ply With Ploy Urethane Foam 50Mm Thick Moulded With Density 40 Kgs Per Cum With Fiber Cloth Of Approved Colour And Shade With Black Pvc Beeding Including Necessary Nut Bolts And Washer. ( Fd / E6 / Map / 01 ) 102 Taking Out Unserviceable Back Of Chair Computer And S&F New Back 12Mm, Teak Ply With Ploy Urethane Foam 50Mm Thick Moulded With Density 40 Kgs Per Cum With Fiber Cloth Of Approved Colour And Shade With Black Pvc Beeding Including Necessary Nut Bolts And Washer. ( Fd / E6 / Map / 01 ) 103 Removing Of Unserviceable Castor From The Chair Computer Revolving Ands&F New Castors As Per Drg And Directed. ( Fd / E6 / Map / 01 ) 104 Removing Of Unserviceable Pvc Base ( 5 Legs ) From The Chair Computer Revolving Ands&F New Pvc Base As Per Drg And Directed. ( Fd / E6 / Map / 01 ) 105 Removing Of Unserviceable Hydraulic Assy From The Chair Computer Ands&F New Hydraulic Assy With Pvc Couplings As Per Drg And Directed. ( Fd / E6 / Map / 01 ) 106 Taking Out Unserviceable Pu Handle Of Chair Computer And S&F New Handle With Suitable Screw / Nut / Bolts As Per Drg. ( Fd / E6 / Map / 01 ) 107 Replacement Of Writing Top Made Of 18Mm Thick Pre-Laminated Mdf Board Of Approved Colour Isi Marked 585Mm X 500Mm And Fixing It To Handle Of Chair By Means Of Hinges 75Mm All As Per Drg And As Directed. ( Fd / E6 / Map / 05 ) 108 M&L Welding Where Required And Filling Properly At Places Of Welding Point Throughout In Brokenjoints Of Frame Including Painting Of Replaced Part Of Steel Portion To Match With Existing As Directed. One Broken Point Shall Be Measured As One Point I.E. One Unit. Chair Writing, Cba With Hand Rest, School With Hand Rest And Table Bed Side ( Fd / E6 / Map / 12, Fd-260, Fd / E6 / Map / 05, Fd / E6 / Map / 15 ) 109 Removing The Useviceable Pvc Seat Assy From Chair School With Hand Rest And S &F New Pvc Seat Assy Of Superior Quality As Shown On Drg And As Aproved By Engr-In-Charge. ( Fd / E6 / Map / 05 ) 110 Chaircb / Cba Steel Mh ( 23.01 To 23.03 ) : ( Hfd-2045 ) 111 Taking Out Unserviceable Seatof Chair Cba Steel Mh And S&F New Seat 12Mm, Teak Ply With Ploy Urethane Foam 50Mm Thick Moulded With Density 40 Kgs Per Cum With Fiber Cloth Of Approved Colour And Shade With Black Pvc Beeding Including Necessary Nut Bolts And Washer. 112 Taking Out Unserviceable Backof Chair Cba Steel Mh And S&F New Seat 12Mm, Teak Ply With Ploy Urethane Foam 50Mm Thick Moulded With Density 40 Kgs Per Cum With Fiber Cloth Of Approved Colour And Shade With Black Pvc Beeding Including Necessary Nut Bolts And Washer. 113 M&L 04 Nos Of Hard Rubber Toe In Legs Of Chair Cb / Cba Steel Mh Including Removal Of Broken Rubber Toe. 114 Chair Easy Steel / Hfd ( 24.01 To 24.02 ) : ( Hfd-2034 ) 115 Removing Of Unserviceable Cloth Rexene And Foam Cushion Cloth Of Chair Easy Frame And Supplying And Fixing New Rexene / Lining Cloth / Frame With Cushion 40 Density, 50Mm Thick As Shown In Drawing And As Directed.Size Of Seat Frame Shall Be 560Mm X 535Mm X 50Mm. 116 All As Per Item No 20.01 Above But Back Frame Of Chair Easy Steel Of Size 560Mm X 355Mm X 25Mm ( Thickness Of Foam Cushion 50Mm & 40Mm Density ) . 117 Chair Revolving ( 25.01 To 25.06 ) : ( Tp ) 118 Taking Out Unserviceable Seatof Chair Revolving And S&F New Seat 12Mm, Teak Ply With Ploy Urethane Foam 50Mm Thick Moulded With Density 40 Density With Fiber Cloth Of Approved Colour And Shade With Black Pvc Beeding Including Necessary Nut Bolts And Washer. 119 Taking Out Unserviceable Back Of Chair Revolving And S&F New Back 12Mm, Teak Ply With Ploy Urethane Foam 50Mm Thick Moulded With Density 40 Density With Fiber Cloth Of Approved Colour And Shade With Black Pvc Beeding Including Necessary Nut Bolts And Washer. 120 Removing Of Unserviceable Castor From The Chairrevolving Ands&F New Castors As Per Drg And Directed. 121 Removing Of Unserviceable Pvc Base ( 5 Legs ) From The Chairrevolving Ands&F New Pvc Base As Per Drg And Directed. 122 Removing Of Unserviceable Hydraulic Assy From The Chair Revolving Ands&F New Hydraulic Assy With Pvc Couplings As Per Drg And Directed. 123 Taking Out Unserviceable Pu Handle Of Chair Revolving And S&F New Handle With Suitable Screw / Nut / Bolts As Per Drg. 124 Stool Steel With Backrest Hfd 2007 ( 27.01 To 27.02 ) : ( Hfd 2007 ) 125 Removing Unserviceable Cloth Rexene And Foam Cushion Cloth Ofseat Of Stool Steelframe And Supplying And Fixing New Rexene / Lining Cloth / Frame With Cushion 40 Density, 50Mm Thick As Shown In Drawing And As Directed. 126 Removing Unserviceable Cloth Rexene And Foam Cushion Cloth Of Back Of Stool Steelframe And Supplying And Fixing New Rexene / Lining Cloth / Frame With Cushion 40 Density, 50Mm Thick As Shown In Drawing And As Directed. 127 Schedule Of Credit
|
