Purchase Of Tools And Equipment Required For Survey Lab And Transportation Engineering Lab...

Contract Award Notice

Work Detail

Purchase Of Tools And Equipment Required For Survey Lab And Transportation Engineering Lab Under The Civil Engineering Dep-1.01 Vernier Transit Theodolite ( Babir-Vtto1 ) - Resolving Power 4, Field Of View 2.6 M At 100M, Material Aluminium, Short Focus 1.5M, Stadia Ratio 1100, Length 178 Mm Magnification 25X, Effective Aperture 38Mm, Circle Diameter Hz113mm, V100mm. 1.02 Dumpy Level -Levelling Range -1Km, Longest Focusing Distance 200 / 300 Mtr Objective Aperture 40 Mm Stadia Constant 1:100 Addition Constant 0 Bubble Sensitivity 20” / 2 Mm Nominal Accuracy 2-3 Mm / Km Weight 2.650 Kg. 1.03 Cbr Apparatus ( Is 2720-Part Xvi ) - 50 Kn Capacity. Table Top Type -Mould And Proving Ring With Standard Calibration Chart And All Accessories. 1.04 Marshall Stability Apparatus -50 Kn Capacity. Analogue Type With Proving Ring And Dial Gauge. It Consists Of Three Cylindrical Moulds 10.16 Cm Dia X7.6 Cm High With Base Plate And Extension Collars, A Specimen Extractor, Two Hammers ( 4.5 Kg ) With Standard Calibration Chart. 1.05 Test Sieve ( Is 460 ) 20Mm Dia -Brass Made -One Set- ( 4.75Mm, 2.36Mm, 1.18Mm, 0.600Mm0, 0.425Mm, 0.300Mm, 0.150Mm, 0.075Mm ) . 1.06 Test Sieve ( Is 460 ) 30Mm Dia –G I Made -One Set- ( 75Mm, 50Mm, 40Mm, 37.50Mm, 25Mm0, 20.00Mm, 12.50Mm, 10.00Mm, 4.75Mm ) 1.07 Elongation Index Gauge- ( Length Gauge ) -Brass Type-Is2386. 1.08 Thickness Gauge- Flakiness Index- Brass Type-Is2386. 1.09 Automatic Bitumen Compactor Of Fully Automatic Type. ( The Drive Mechanism Lift The Weight Of 4.5 Kg And Drop Height 457Mm ) . Standards Bs 598-107. 1.1 Standard Tar Viscometer- Is 1206 ( Part 1 ) -Consists Of A Chrome Plated Copper Bath With Cup Of 10Mm Orifice And Sleeve With Lifting Clip And Ball And It Operate On220 Volt Ac Mains. Ring And Ball Apparatus- Is 1205 Consists Of Steel Bracket With Sliding Plate Support, A Central Hole On This Plate For Inserting Thermo Meter. It Consists Of Tampered Ring -2 Nos, 1.11 Ball Centring Guide-2 Nos. Steel Ball Of 9.5Mm Dia & Magnetic Stirrer With Heating Facility. 1.12 Bitumen Ductility Testing Machine- Is 1208 -Testing Range1.5-2M, Rotating Shaft Speed 5 Cm / Min. The Briquette Is Stretched Rate Of 50 Mm / Min. It Consist Of A Water Bath With Thermostatic Heater And Circulating Pump .It Operate On 230 V And Inner Material Is Stainless Steel.

Key Dates

Contact Information